Kenmore Dryer 110.63066101 (11063066101, 110 63066101) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10139210
Replace worn, stripped, or missing 8-18 x 3/8 machine screws that secure control panels, trim pieces, and brackets on your appliance. Restores tight fit.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694091
This is a replacement side trim screw that secures the refrigerator side trim/finish panel, restoring a snug fit and finished appearance. Designed to match the original factory fit and finish on compatible Whirlpool units. What it does:
- Fastens the side trim/finish panel so the exterior trim sits flush and secure
- Helps stop rattling, shifting, or gaps caused by loose or missing trim screws
- Matches factory color and head style to keep a consistent exterior look
- Small hardware piece used in multiple trim/assembly locations
What's included:
- One side trim screw (black)
Install notes:
- Use the matching screwdriver or bit to avoid stripping the screw head
- Tighten until snug; avoid over-torquing which can crack trim or strip threads
- Turn power off and remove any nearby panels if needed for safe access
- Replace all to ensure even fit
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387118
Fix excessive vibration or loud rattling noises during cycles with this dryer motor mounting bracket. Secures motor to cabinet for stable operation.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8066086
This drum hole plug seals an unused or service access hole in the dryer drum to help prevent clothing snags and reduce interior airflow leaks. Simple replacement restores the drum surface and helps keep items from catching. What it does:
- Covers a drum access/service hole to provide a smooth interior surface
- Prevents fabric from catching or tearing on open drum holes
- Reduces unwanted air leakage through the drum
- Helps maintain normal drum rotation contact points by keeping openings closed
What's included:
Install notes:
- Disconnect power to the appliance before starting any repairs
- Inspect the drum area and remove any debris before installing the plug
- Press or snap the plug into the hole until fully seated; replace if damaged or deformed
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406797
Replaces damaged lower front panel on your dryer. Restores cabinet seal and professional appearance. Confirm fit with your model number before ordering.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98129
Size: 6 - 20 x 1 1/16 inch.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 3936144
Dryer won't power on or trips breaker? This terminal block plug connects power to your dryer's electrical system. Common fix for power issues.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11782150
Replaces a cracked, broken, or missing dryer drum baffle. Installs inside the drum to lift and tumble clothes during the drying cycle. Easy repair.
Do-It-Yourself Stories from Customers like You
All three baffles were cracked and broken Armando C. • Ridgewood , NY • July 28, 2026
Thanks to the repair video you provided, made it easy to replace the broken baffles.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823582
The Door Seal is an OEM component specifically designed for Whirlpool dryers. It works to create an airtight seal between the dryer door opening and drum interior. During operation, heated air and moisture are contained within the drum thanks to this crucial seal.
Symptoms of a worn door seal include:
- Increased drying time due to air leaks
- Clothes not drying completely before end of cycle
- Excess humidity escaping into home
- Discoloration or residue buildup on door glass
Causes of failure are normal wear and compression over extended use, or damage from improper door closure. A worn seal degrades efficiency and performance of the dryer.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer timer worn out would dry cloths but would not wind down to the end of cycle to set off the buzzer this is a 30 year old gas dryer! Jeffrey M. • Milwaukee , WI • February 09, 2025
Removed old timer, replaced with new timer. Super simple!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10545923
Replace a worn or damaged dryer drum that's causing noise, poor tumbling, or clothing snags. Sheet metal construction holds laundry during cycles.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10404617
Seals unused vent openings in your dryer to prevent unwanted airflow, drafts, and debris entry. Replace if cracked, missing, or no longer sealing properly.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11417441
Cabinet housing for dryers. This outer shell encases internal components. Replace if cracked, rusted, dented, or structurally damaged from impact or wear.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 279780
Encloses the blower wheel and seals the housing for efficient airflow. Replace if cracked, broken, or missing to restore proper air movement.
Do-It-Yourself Stories from Customers like You
The dryer drum was wobbling and banging Robert W. • Needham , MA • February 28, 2026
Replaced the drum rollers, and cleaned the lint path.
Read more
More
$54.25
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3395683
This motor connector housing is the molded body that holds the motor's wire terminals for a secure, insulated connection. Replacing a cracked or heat-damaged housing helps restore reliable motor operation and prevent intermittent power issues.
- Organizes and insulates the motor's wiring terminals
- Locks the harness to the motor for a firm electrical connection
- Helps reduce loose contacts, arcing, and heat damage at the plug
- If the housing is failing, you may see intermittent or no motor operation, the machine stopping mid-cycle, or visible melting/discoloration at the motor connector
What's included: 1 plastic motor connector housing Install notes:
- Disconnect power; also shut off gas supply
- Note wire positions; transfer terminals into the new housing one at a time to maintain orientation
- Inspect terminals and wiring; replace any burnt or loose terminals before reassembly
- Ensure the connector seats fully on the motor and the harness is secure; restore power and test
More
$40.40
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 279954
White end cap kit with left and right caps for the dryer control panel ends. Provides finished appearance and protects panel edges.
More
$83.47
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119283
This terminal cover protects and conceals the appliance's electrical wire terminals for safer handling and cleaner internal appearance. It helps reduce accidental contact with live connections and keeps wiring organized. What it does:
- Covers exposed wire terminals to help prevent accidental contact and shorting
- Keeps wiring routed and held in place for improved serviceability
- Protects terminals from dust and debris that can affect connections
- Supports safer access during diagnostics and repairs
What's included:
- One terminal cover, as shown
Install notes:
- Disconnect power to the appliance before attempting any service
- Remove outer panels as needed to access the terminal area; use manufacturer service guide for panel removal steps
- Align cover over the terminal block and secure per factory mounting points; do not force or modify
- If terminals or wiring appear damaged or corroded, replace or repair those components before reinstalling the cover
More
$58.43
Out Of Stock
Usually ships within 4 - 14 days