Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Kenmore Dryer 110.79812990 (11079812990, 110 79812990) Parts

Dryer Shield
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233063

Factory protective shield panel for dryer assembly. Guards internal components and directs heat or airflow. Replace if cracked, broken, or missing.

Do-It-Yourself Stories from Customers like You The seals were worn.   Anthony C. • Bentonia , MS • November 14, 2023

I changed the thermostat and replaced the worn out seals. Read more

More
$14.56

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Retainer Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: 279771

This retainer clip secures a component in place to prevent movement and maintain proper alignment during appliance operation. Replacing a damaged or missing clip helps restore safe, reliable performance.

  • Holds the mating part firmly to reduce vibration and noise
  • Helps prevent intermittent operation caused by loose fitment
  • Common fix when a component feels loose, rattles, or won't stay seated
What's included: 1 retainer clip Install notes:
  • Disconnect power and shut off gas/water before servicing
  • Note original clip orientation and location before removal
  • Use needle-nose pliers to carefully release and install the clip
  • Do not over-bend the clip; replace if deformed or fatigued

More
$9.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Motor Connector Housing
Genuine Whirlpool part
By: Whirlpool
Part Number: 3395683

This motor connector housing is the molded body that holds the motor's wire terminals for a secure, insulated connection. Replacing a cracked or heat-damaged housing helps restore reliable motor operation and prevent intermittent power issues.

  • Organizes and insulates the motor's wiring terminals
  • Locks the harness to the motor for a firm electrical connection
  • Helps reduce loose contacts, arcing, and heat damage at the plug
  • If the housing is failing, you may see intermittent or no motor operation, the machine stopping mid-cycle, or visible melting/discoloration at the motor connector
What's included: 1 plastic motor connector housing Install notes:
  • Disconnect power; also shut off gas supply
  • Note wire positions; transfer terminals into the new housing one at a time to maintain orientation
  • Inspect terminals and wiring; replace any burnt or loose terminals before reassembly
  • Ensure the connector seats fully on the motor and the harness is secure; restore power and test

More
$40.40

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Control Panel End Cap Kit - White
Genuine Whirlpool part
By: Whirlpool
Part Number: 279954

White end cap kit with left and right caps for the dryer control panel ends. Provides finished appearance and protects panel edges.

More
$83.47

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Signal Switch (Buzzer Adjust)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3398093

This signal switch controls the appliance's buzzer/alert level, letting the unit sound or change beeper volume so you can hear end-of-cycle or error alerts. It replaces a failed or intermittent buzzer control for reliable audible notifications. What it does

  • Sends the control board a signal to enable or adjust the buzzer/alert tones
  • Restores audible end-of-cycle and error notifications when the original switch is worn or unresponsive
  • Commonly replaces switches that feel loose, don't click, or fail to change the buzzer setting
  • Works as the user-accessible control for enabling/disabling or adjusting buzzer functions
What's included
  • One signal switch
Install notes
  • Disconnect power before servicing to avoid shock or damage
  • Handle wiring and connectors gently; verify and match terminals before reconnecting
  • Reassemble panels and test buzzer function before full reinstallation

Do-It-Yourself Stories from Customers like You Dryer would not stop at end of cycle   Castulo C. • Woodstock , GA • June 29, 2015

Replaced the signal switch and it fixed the problem. The signal switch also sends a signal to the motor driving the timer switch to turn off at end of cycle. My signal switch was defective; upon replacement dryer now works fine. The part costs were 45 dollars and time to replace was about 30 min. Figured I saved about $130 bucks vs. a technician coming over to fix. Read more

More
$78.27

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Machine Bolt 5/16-18 X 3/4
Genuine Whirlpool part
By: Whirlpool
Part Number: 3400500

Replacement machine bolt for securing panels, brackets, and components in dishwashers, dryers, washers, and laundry centers. Restores fit if missing.

More
$9.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Knob, Control
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3402572

 

Do-It-Yourself Stories from Customers like You Plastic knobs disintegrated on dryer due to sun exposure   John C. G. • Placerville , CA • April 10, 2018

Called AppliancePartsPros who told me what I needed and even placed the order for me. Voila, that simple. Read more

More
$24.60

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Bumper (Grey)
Genuine Whirlpool part
By: Whirlpool
Part Number: 238614

Rubber bumper. Color: Grey.

More
$66.86

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Terminal Block Connector Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: 3391885

Fix a dryer that won't start or has no power with this terminal block connector assembly. Common repair for electrical connection issues. Moderate DIY.

More
$50.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw (8-18 X 7/32)
Genuine Whirlpool part
By: Whirlpool
Part Number: 3400859

This is a replacement 8-18 x 7/32 machine screw used to secure panels and small components in compatible Whirlpool appliances. It restores proper fastening where a screw is missing, stripped, or damaged. What it does:

  • Secures panels, trim pieces, brackets or small components to prevent movement
  • Helps stop rattling, vibration noise, or loose-fitting parts
  • Replaces missing or damaged screws to restore proper alignment of panels or controls
  • Used wherever an 8-18 x 7/32 machine screw is specified by the manufacturer
What's included: One replacement screw. Install notes:
  • Unplug the appliance or turn off power before servicing.
  • Use the correct screwdriver or bit to avoid stripping the head; tighten snugly but do not over-torque.
  • Replace any stripped inserts or mating hardware if threads are damaged.

More
$14.14

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Drum Light Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: 3977373

Secures the light bulb socket inside your dryer drum. Replace if the bracket is cracked, broken, or missing to properly mount the drum lighting assembly.

More
$71.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Shunt Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: 694538

Mounting bracket for dryer shunt assembly. Secures electrical shunt component to cabinet frame. Replace if cracked, bent, or missing hardware slots.

More
$38.54

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Appliance Touch Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 799344

Color: White. Size: 1 qt. can. Acrylic appliance paint.

More
$174.30

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Electrode (Ignition)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP348859

This ignition electrode delivers the spark needed to light the burner in compatible gas ovens and ranges, restoring reliable ignition so burners and bake/broil functions light properly. What it does:

  • Produces the spark for the gas burner to ignite
  • Helps ensure consistent ignition timing and burner starts
  • Commonly used when a burner fails to light or ignition is intermittent
  • Works with the oven/range ignition system to start bake and broil cycles
What's included: One ignition electrode Install notes:
  • Disconnect power and shut off the gas supply before starting any repair
  • Handle the ceramic/insulated tip carefully to avoid cracking or contamination
  • Verify correct electrode position and secure mounting for reliable sparking

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Electrode
Genuine Whirlpool part
By: Whirlpool
Part Number: WP348860

 

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Appliance Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10366705

Replacement mounting screw for securing panels, brackets, and interior assemblies. Needed when original screw is stripped, missing, or damaged.

More
$7.56

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google