Kenmore Dryer 110.86694710 (11086694710, 110 86694710) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Broken handle foot pedal and missing parts Donald M. • Lake Arrowhead , CA • April 05, 2015
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy!
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: W11736322
This replacement cover restores the appliance's finished appearance and protects internal components from dust and debris. It's a direct-fit exterior trim piece designed to replace a cracked, broken, or missing cover. What it does:
- Protects internal components and wiring from debris and accidental contact
- Restores the appliance's cosmetic appearance and helps maintain sealing
- Helps reduce dust buildup in the covered area
- Replaces damaged or missing trim that can expose sharp edges or hardware
What's included: One outer cover Install notes:
- Disconnect power (unplug or switch off circuit breaker) before beginning work
- Basic hand tools may be required; follow for panel removal/replacement
- Handle carefully to avoid scratching the finish and watch for sharp edges
- Replace with manufacturer-recommended fasteners
Do-It-Yourself Stories from Customers like You
Broken coupling half Neal F. • W Portsmouth , OH • February 27, 2026
Replaced broken coupling with new coupling
Read more
More
$27.95
- Compare At:
-
$33.20
- You Save:
-
$5.25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11693756
Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
Door switch on dryer. James A. • Middleburg , FL • January 20, 2020
It was very easy to fix after watching your video..
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066217
Supports and pivots the hinged dryer top panel for service access. Replace if cracked, broken, or causing wobble, scraping, or alignment gaps.
Do-It-Yourself Stories from Customers like You
Dryer wouldn't heat up. John B. • Dundalk , MD • January 19, 2020
Installed a new Ignitor & Thermal Fuse.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3403636
Short baffle that mounts inside the dryer drum to lift clothes as the drum rotates. Replace if cracked, broken, or missing for proper tumbling action.
Do-It-Yourself Stories from Customers like You
Missing/broken dryer drum baffle Jeremy W. • Baltimore , MD • July 14, 2017
Replaced it.
Read more
More
$65.74
- Compare At:
-
$77.57
- You Save:
-
$11.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP273556
Size: 10-16 x 5/8 inch.
Do-It-Yourself Stories from Customers like You
Console screws were rusty and the other screw was broken. Denis C. • Baltimore , MD • June 20, 2018
I used a screwdriver and removed all three screws and replaced them with ones I ordered from you. The job took less than ten minutes to complete.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11117429
Do-It-Yourself Stories from Customers like You
Paint was spilled down lint chute screen was not removed quickly and became stuck in the chute Jay C. • Albany , CA • November 26, 2016
I replaced the chute and screen - I am very mechanical and have good tools - it took me less than 30 minutes - would take many people longer but it is a straightforward project
Read more
More
$80.95
- Compare At:
-
$97.14
- You Save:
-
$16.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10044470
Right handed Hinge
Do-It-Yourself Stories from Customers like You
The dryer worked but did not heat Donald L. • Rimrock , AZ • February 29, 2016
Pry the top up from the front edge with a flat screw driver, the lid will hinge up and back, the heating element is on the left rear, it only takes a 1/4 nut driver to remove and replace
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 350956
Almond. Size: 13 oz. can. Acrylic appliance paint.
Do-It-Yourself Stories from Customers like You
Age no money to fix it Ronald V. • Cape Coral , FL • August 01, 2015
Was able to match it pretty well the natural age difference was good. The delivery of the product was amazing it took less than 24 hours to get to me and that was standard shipping. Give you guys an A for great !!
Read more
More
$30.52
- Compare At:
-
$36.32
- You Save:
-
$5.80
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4314961
Color: Black. Instruction sheet included.
Do-It-Yourself Stories from Customers like You
The dense pack rocker switch on our whirlpool compactor broke after 28 years Jane G. • Hubbardston , MA • August 21, 2016
Removed rocker switch,made up jumper so the compactor could be used while awaiting replacement switch. The part came 2 days later and was installed in less tha 5 minutes. Unit working like new again. Thanks for the great service!!
Read more
More
$53.21
- Compare At:
-
$63.32
- You Save:
-
$10.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10041960
This door spring restores the proper counterbalance of the oven door so it opens smoothly and closes with controlled tension. Replacing a worn or broken spring helps prevent the door from dropping, slamming, or sitting unevenly.
- Provides counterbalance tension for the oven door through the hinge mechanism
- Helps the door open smoothly and hold at a partially open position
- Maintains even alignment and consistent gasket contact
- Common symptoms of failure: door feels heavy, drops open or slams, uneven door height, squeaks during movement
What's included: One door spring. Install notes:
- Disconnect power at the breaker and allow the oven to cool completely
- Springs are under tension—support the door and use caution to avoid injury
- Note the spring's routing and anchor points before removal; reinstall in the same positions
- For even tension, consider replacing both door springs when the design uses one per side
Do-It-Yourself Stories from Customers like You
Door would not stay closed. Mark B. • Greenfield , WI • January 05, 2020
Purchased the above kit to repair the door hardware. Also had to purchase door hinges to replace one I found broken after disassembling the dryer front. Parts arrived as shown in the online pictures, and arrived within 4-5 business days.
Read more
More
$28.28
- Compare At:
-
$31.65
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10044480
Connects lint screen lid to dryer, enabling smooth opening and secure closing. Replace when bent, cracked, or broken to restore proper lid operation.
Do-It-Yourself Stories from Customers like You
Dryer motor Joseph S. • Lancaster , NY • January 17, 2015
I replaced it
Read more
More
$10.41
- Compare At:
-
$12.28
- You Save:
-
$1.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596797
Genuine Whirlpool part
By: Whirlpool
Part Number: WP94614
For mating terminal use [AP31136300].
More
$4.95
- Compare At:
-
$5.89
- You Save:
-
$0.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358160
This lock nut secures appliance components and resists loosening from vibration. Replacing a stripped, rusted, or missing nut restores a firm, reliable connection to reduce noise and prevent parts from shifting or backing off.
- Secures brackets, shafts, pulleys, panels, or other hardware as designed by the manufacturer
- Helps prevent fasteners from loosening due to vibration and thermal cycling
- Common fix for rattling/vibration noises and components that work loose over time
- Replaces damaged, rounded, or missing original nut to restore proper fit
What's included: 1 lock nut Install notes:
- Disconnect power and shut off gas/water supplies before servicing
- Remove the worn nut with the appropriate wrench or socket
- Start the new nut by hand to avoid cross-threading; tighten securely—do not overtighten
- Inspect the mating bolt/stud and any washers; replace if worn or damaged
Do-It-Yourself Stories from Customers like You
Dryer drum was making one heck of a racket while running Michael R. • Closter , NJ • January 08, 2015
The cylinder roller that supports the dryer drum was worn and needed to be replaced. I ordered the idler pulley shaft and associated parts as well since I wasn't sure if these were worn too.
Watching the video on the web site gave me a good idea what was involved and where to look. It wasn't my exact model and make but provided sufficient information on what to look for. The parts were exact fits which was a great relief abd the dryer is running like new again!
Read more
More
$2.09
- Compare At:
-
$4.46
- You Save:
-
$2.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577230
Dryer not drying or taking too long? A cracked blower housing disrupts airflow. This assembly restores proper venting for efficient drying cycles.
More
$79.95
- Compare At:
-
$94.34
- You Save:
-
$14.39