Kenmore Range Hood 233.55029000 (23355029000, 233 55029000) Parts

The Light Socket is an OEM replacement part for Broan range hoods. This electrical fitting provides a power connection point for light fixtures above stovetops. A faulty socket jeopardizes safe operation.

Causes of a bad socket can include loose wire connections allowing arcing or shorts, moisture intrusion corroding terminals, or cracking of plastic insulation. 

Symptoms of a bad light socket include: 

• Intermittent or non-functioning lights  
• Warm socket housing or abnormal smells/sounds
• Tripped breakers or blown fuses servicing the range hood

This OEM component fits additional brands like Thermador, Viking, and some Kenmore range hood models using equivalent Broan designs.

Secures the grease filter in your Allure range hood. This filter spring kit replaces worn or missing springs so the filter stays seated, reducing rattling and preventing the filter from dropping during operation.

• Applies spring tension to hold the grease filter in place
• Helps maintain proper airflow by keeping the filter fully seated
• Reduces vibration and noise from a loose filter
• Common symptoms: filter falls out, hangs loosely, or is hard to keep latched

• Disconnect power at the breaker before servicing the hood
• Remove the grease filter(s) to access the spring location
• Wear cut-resistant gloves; sheet metal edges can be sharp
• Ensure springs are fully seated in the factory slots/tabs, then test-fit the filter

This is one set (2) of filters. Approximate dimensions: 14-5/16" x 11-13/16"

This factory replacement plate provides a rigid, stable mounting surface inside your unit. Replacing a bent or damaged plate helps keep internal components securely positioned and operating smoothly.

• Supports and locates attached components for correct fit and function
• Helps maintain alignment to reduce rubbing, vibration, or rattling noises
• Restores secure mounting when the original plate is bent, cracked, or missing
• Direct-fit replacement built to match the original footprint

• Disconnect power at the breaker before servicing
• Wear cut-resistant gloves; metal edges can be sharp
• Support attached parts and transfer any brackets or hardware from the old plate
• Tighten fasteners evenly before restoring power

This blower motor powers the fan assembly to move air through the ventilation system, restoring airflow and ventilation performance. Ideal when the fan is weak, intermittent, or not running. What it does

• Spins the fan/blower to exhaust air from range hoods or ventilation fans.
• Replaces a failed motor that hums, won't start, or runs intermittently.
• Restores normal airflow and reduces overheating from stalled fans.
• Helps eliminate unusual noises like grinding or squealing when motor bearings fail.

• One replacement blower motor

• Disconnect power at the breaker before starting any repair.
• Basic hand tools may be needed; mounting hardware or harnesses may be reused if in good condition.
• Follow the appliance's service manual for wiring and mounting instructions.
• If you smell burning or see damaged wiring, stop.

A small replacement mounting screw used to secure range hood and ventilation components. Restores loose or missing fasteners so panels and assemblies sit firmly and stop rattling or shifting during use. What it does

• Secures trim, grille, brackets or other small assemblies to the main housing
• Replaces a missing or stripped screw that causes rattling or loose parts
• Helps restore proper alignment of removable panels and covers
• Works as a direct fastener when the original screw is lost or damaged

• Turn power off to the appliance before working on vents or housings
• Use the matching screw hole and do not force a different-size fastener
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• If threads are damaged, replace the mating clip or insert before using this screw

This activated carbon charcoal filter traps cooking odors for non-ducted range hoods, improving kitchen air quality by reducing lingering smells. Easy to swap when odors persist or airflow seems less fresh. What it does:

• Adsorbs and reduces cooking odors and smoke particles in recirculating (non-vented) range hood setups
• Helps maintain fresher-smelling air during and after cooking
• Designed for periodic replacement to restore odor-trapping effectiveness
• Suitable for use in compatible recirculating hood models that accept a round charcoal cartridge

• One activated carbon (charcoal) round filter

• Replace with power off and hood controls in the OFF position
• Typically installs in the hood's recirculation/filter chamber — follow your hood's disassembly steps
• Dispose of used filter according to local regulations for household waste

This isolation transformer supplies the low-voltage control circuit that powers switches, relays and controls in the ventilation unit—restoring proper control operation and stable low-voltage output. What it does:

• Converts and isolates the appliance control circuit from main power to protect controls and reduce electrical noise
• Restores low-voltage power to switches, relays and electronic controls that fail when the transformer is bad
• Prevents intermittent or no-response symptoms from control panels and blower/light circuits
• Provides a direct replacement for the original transformer to maintain proper control operation

• Disconnect all power to the appliance before starting any work
• Verify wiring locations and terminal markings; match connections exactly to the original transformer
• Inspect mounting and harness routing; secure transformer to prevent vibration

This replacement panel restores the proper fit and finish of your ventilation appliance. It covers and protects internal components so attached parts mount securely and the unit operates smoothly without loose, rattling, or misaligned pieces.

• Covers and shields internal components from damage and debris
• Provides a stable mounting surface for associated hardware or trim
• Helps reduce vibration and rattling when installed correctly
• Replace when panel is cracked, bent, missing, or will not secure

• Disconnect power at the breaker before servicing
• Support the panel while removing/installing screws or clips; retain fasteners for reuse
• Transfer any components attached to the old panel to the new one
• Wear cut-resistant gloves; panel edges can be sharp

This motor run capacitor provides the stable electrical charge needed for blower and fan motors to start and run smoothly, helping restore proper airflow and quiet operation in ventilation and range hood systems. What it does:

• Supplies the phase-shifting charge that helps fan/blower motors start and maintain speed
• Commonly replaced when motors fail to start, run intermittently, or run weakly
• Can stop humming or buzzing caused by a failing motor start circuit
• Restores consistent airflow and prevents motor overheating caused by repeated start attempts

• Disconnect power to the appliance at the breaker before servicing
• Verify capacitor is discharged before touching terminals to avoid shock
• Use the exact OEM capacitor specification shown for your model when ordering

This is a replacement name plate that restores the appliance identification and rating label so model, serial, and safety information is readable for service and compliance. It keeps important ID and rating details easy to read. What it does:

• Replaces a missing, damaged, or illegible manufacturer name plate or label
• Restores visible model, serial, and electrical/rating information used during service
• Helps ensure appliance information is available for inspections and repairs
• Useful when original label is peeling, scratched, or worn

• Follow the appliance manufacturer's instructions for replacing identification labels
• Disconnect power to the appliance before starting any service
• Clean and dry mounting surface before attaching the new name plate
• If the name plate attaches with adhesive or fasteners, use the same method specified by the OEM