Kenmore Freezer 253.28452805 (25328452805, 253 28452805) Parts

Replace the lock assembly: Open the lid and remove four philips screws from underneath the gasket. Carefully and patiently remove all of the gasket clips, first from the left and right sides then remove all but two from the top so when the final one comes out the panel and gasket can come towards you and then set gently in the top of the freezer. Remove the wires from the bulb in the center so they won't be in the way. Remove the large fiberglass rectangle and set it on top of the panel. Use a... Read more

The door to our freezer was sagging due to the a nylon bearing wearing out on the bottom hinge. The sagging door prevented a good seal. I replaced the bottom bearing, and the door seals perfectly. Read more

Simply took out old that was falling apart and pushed in the new one. Because it was packaged bent in two places, it didn't fit as snugly in one section as it should, the bend wouldn't totally straighten, but hoping it's OK. Read more

Found the part on appliance pro, ordered it, and when it came got on the live chat to get some information on how to install the part. They sent me a link to a video showing how to instLl the part. This place is amazing and has saved me so much money by doing the work myself. I have used their site many times to repair things. Thank you! Read more

The square shaft was broken off in the recessed hole of the freezer door lock and would not allow the key to engage it to turn and lock the freezer door. R and R of door lock assy was necessary but not easy-it was accessed through a 1/2" X 1.5" slot in the inner ledge of the door that the hook from the lock protruded through to lock the door. I removed the lock retaining clip through the slot, slid the lock assy out, replaced it with the new assy and replaced the clip. All with curved... Read more