Kenmore Refrigerator 253.51692100 (25351692100, 253 51692100) Parts

The repair was quite simple thanks to Appliance Parts Pro. The first step that I did was watch the helpful repair video from appliance Parts pro. I did not just run out and buy the condenser fan motor as instructed by the repair video. I went and bought a multimeter tester and tested the motor and it determined to be the condenser motor. The multimeter only cost about $ 5.00 from Harbor freight. On the other hand the fan motor for my model cost $ 168.00 from Appliance Parts Pro for my... Read more

Replaced it Read more

Replace both thee the dispenser lever and the housing as both had broken tabs. Took about 45 minutes. Pretty straight forward repair. Easy enough that you can simply look at it to see how it comes apart. Tip: to get main panel off, remove 3 screws under drip tray then the panel slides up to come off door. Read more

I checked with Appliance Parts Pros.com and found out that the likely culprit was a broken Ice Dispenser Actuator Arm. I watched a video on the same site and figured I could change that part. I wanted to confirm it was that part so I took the front section apart. The Ice Dispenser Actuator Arm was in fact broken; the little tab that strikes the switch had broken off. While removing that part, when I unscrewed the right side's mounting screw, that section broke off (brittle plastic). I then... Read more

For the actuator, I took off the dispenser plate, removed 3 screws holding the actuator. Flipped it over to remove the brackets holding the actuator. Removed old actuator and installed new one, put the bracket back on and then flipped over put the three screws in and put the dispenser plate back on. Took me 30 minutes. The door bin just snapped in the door. Read more