Kenmore Range 362.62788003 (36262788003, 362 62788003) Parts
Genuine Ge part
By: Ge
Part Number: WB02K10062
Plastic support guide that mounts to the rear of your range storage drawer. Replace if cracked, broken, or missing to keep drawer aligned and gliding smoothly.
Do-It-Yourself Stories from Customers like You
A broken drawer support glide on the drawer of my stove Susan S. • Alton , NH • February 15, 2021
My husband replaced the part in less than fifteen minutes. It would have been quicker if the screws had been included!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02K10061
Right-side drawer glide supports and guides your range's lower drawer for smooth operation. Replace if broken, cracked, or worn to restore alignment.
Do-It-Yourself Stories from Customers like You
Broken drawer slide part Shaun M. • Fayetteville , NC • June 30, 2021
Ordered the part overnight, quick replacement. Too easy.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02X10521
Adjustable leveling leg for electric ranges. Installs on the bottom corner of the unit. Replace if broken, cracked, or missing to level your range.
Do-It-Yourself Stories from Customers like You
Touch pad was coming apart Sherry B. • Wilson , OK • February 12, 2018
Dismantled the upper part of the stove and removed old part. Had to super glue plastic parts of the underneath part where the touch pad is to be attached to. Put in new touch pad. Worked fantastic.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB30T10071
Burner not heating or working? This radiant surface element sits beneath glass cooktops to restore consistent heat. Quick plug-in repair most DIYers complete.
Do-It-Yourself Stories from Customers like You
Surface element went out on stove Tony B. • Chicago , IL • June 25, 2016
Ordered part from AppliancePartsPros.com and replaced it.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02K10254
Safety bracket that anchors your range to the floor or wall, preventing tip-over. Replace if missing, damaged, or cracked to secure the appliance.
Do-It-Yourself Stories from Customers like You
Ge refrigerator water filter head was making noise and not dispensing water Jay M. • Ridgefield Park , NJ • July 11, 2016
Replaced the water filter head.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10065
Size: 10-32 GXTT FLP.595 S
Do-It-Yourself Stories from Customers like You
Broken shelf fixed fast! Liza B. • Concord , NC • May 06, 2019
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes.
Thanks so much!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02K10028
Secures the upper broil element to the oven cavity top. Replace if your original bracket is cracked, broken, or missing to restore stable mounting.
Do-It-Yourself Stories from Customers like You
Broken support bracket Joseph A. • Clearfield , UT • December 16, 2020
Replaced it with an original part.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB17X5095
The Terminal Block is an OEM part for GE electric ranges. It serves as a critical junction point where the range's wiring connects to the heating elements, ensuring proper electrical flow and operation of the oven and cooktop. This component is essential for the safe and efficient functioning of your appliance.
Causes of a bad terminal block can include overheating due to electrical surges, corrosion from prolonged exposure to heat and moisture, or physical damage from improper installation or handling.
Symptoms of a bad terminal block include:
- The oven or burners not heating properly
- Visible signs of burn marks or corrosion on the block
- Electrical arcing or sparking
- Intermittent or no power to the heating elements
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad wire on terminal block of electric range caused the stove to quit working 3days before thanksgiving Stephen Y. • San Antonio , TX • November 25, 2016
Replaced the power cord, bur terminal block fell apart. Ordered replacement part, and overnight shipping. Received the next day and completed repairs. Cheered up my wife, for sure.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1K5062
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
Do-It-Yourself Stories from Customers like You
Gas burner would not start Eileen L. • Hebron , MD • August 24, 2019
A new electrode and the great schismatics on your website. The only thing that took some time was removing the 2 screws in burner pan. Once removed it was very easy to fix.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1X5364
Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.
More
Genuine Ge part
By: Ge
Part Number: WB1K5119
Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
Dirty burner assemblies and worn and flakig burner grates Yvonne R. • Fernley , NV • March 11, 2015
Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02K10073
Secures the thermostat sensing bulb to the oven cavity wall for accurate temperature control. Replace if missing or damaged to prevent sagging bulb.
More
Genuine Ge part
By: Ge
Part Number: WB01K10020
Positions your range handle at the correct distance from the door. Replace if worn, missing, or cracked to restore proper alignment and prevent rattling.
More
Genuine Ge part
By: Ge
Part Number: WB01X23501
Genuine Ge part
By: Ge
Part Number: WB02K10026
Support rod that props up the lift-up top on your range. Holds the top panel securely in the raised position for cleaning or servicing. Replace if bent or missing.
More
Genuine Ge part
By: Ge
Part Number: WB2X8115
Secures wiring harness to prevent rubbing and loose connections. Replace if worn or broken to restore proper wire routing. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Replaced terminal blocks and elements Jason H. • Brockton , MA • April 01, 2017
Pretty easy job! Just had to remove the old parts and new ones fit perfectly.
Read more
More