Kenmore Range 362.72295790 (36272295790, 362 72295790) Parts
Genuine Ge part
By: Ge
Part Number: WB38K1
$18.77
- Compare At:
-
$27.77
- You Save:
-
$9.00
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB38K2
A replacement vent brace that secures the appliance vent assembly and helps keep vent components aligned for steady airflow and quiet operation. Restores proper support to a loose or sagging vent assembly. What it does:
- Supports and stabilizes the vent/duct assembly so it stays aligned during use
- Reduces vibration and rattling caused by a loose vent bracket
- Helps maintain proper airflow by keeping vent components in the correct position
- Fits where the original vent brace mounts to the appliance frame
What's included: One vent brace Install notes:
- Disconnect power (and gas, if applicable) before servicing the appliance
- Remove the appropriate access panels to reach the vent area; keep fasteners for reassembly
- Verify bracket orientation and screw locations match the original before tightening
More
$7.78
- Compare At:
-
$7.92
- You Save:
-
$0.14
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB39K5
$74.75
- Compare At:
-
$92.83
- You Save:
-
$18.08
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB53K3
$38.28
- Compare At:
-
$65.78
- You Save:
-
$27.50
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB53K4
$93.95
- Compare At:
-
$94.29
- You Save:
-
$0.34
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB55K6
$157.95
- Compare At:
-
$178.32
- You Save:
-
$20.37
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K2
$19.95
- Compare At:
-
$29.04
- You Save:
-
$9.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K21
$46.27
- Compare At:
-
$51.06
- You Save:
-
$4.79
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K24
$31.95
- Compare At:
-
$32.14
- You Save:
-
$0.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K25
$17.67
- Compare At:
-
$20.03
- You Save:
-
$2.36
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K31
$86.44
- Compare At:
-
$148.53
- You Save:
-
$62.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB2K17
Genuine Ge part
By: Ge
Part Number: WB2K8
Genuine Ge part
By: Ge
Part Number: WB13K25
The Spark Module is an OEM replacement part for GE gas ranges. It is responsible for generating electric sparks to ignite the gas burners on the cooktop. The spark module produces consecutive sparks when a surface burner knob is turned on, which ignite the gas mixture and allows the burner flame to ignite safely and consistently.
Causes of a bad spark module can include faulty electrodes, worn internal components that hamper sparking, or damage due to moisture intrusion or power surges over time.
Symptoms of a bad spark module include:
- Burners that will not ignite or only intermittently ignite
- Flashback or burning above the burner head
- The smell of gas when turning burners on
This GE replacement part is also compatible with models from Hotpoint, RCA, and certain Kenmore gas ranges.
Do-It-Yourself Stories from Customers like You
GE Gas Cooktop Wouldn't Light Michael S. • Owasso , OK • March 17, 2014
My problem was intermittent spark and then no spark. My first fix was to give my wife one of those long BBQ grill lighters but after about a week she told me to "FIX IT". After researching the problem on the internet I determined it was likely one of three things: IGNITERS (not likely), SWITCHES (possible), or SPARK MODULE (most likely). I ordered the Spark Module on Sunday night and it arrived on Tuesday. I was totally surprised by the speed of delivery. Took about 30 minutes to install and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1K56
This small metal clip secures the surface burner spark electrode to its bracket or burner base, holding the tip at the proper gap for reliable ignition. Replace a missing, bent, or corroded clip to help restore consistent sparking.
- Holds the surface burner spark electrode firmly in position near the burner head
- Maintains correct alignment and gap so the igniter can spark to the burner
- Can help with delayed ignition, intermittent sparking, or a burner that won't light
- Typical signs include a loose/wobbly electrode, visible damage, or a missing clip
What's included: 1 mounting clip Install notes:
- Disconnect power and shut off gas before servicing
- Lift the cooktop or remove burner components to access the electrode; note clip orientation
- Transfer the electrode into the new clip and seat the clip securely in its bracket or base
- Avoid stressing the electrode's ceramic insulator; verify the tip is aimed at the burner rim and test ignition
Do-It-Yourself Stories from Customers like You
Gas burner would not start Eileen L. • Hebron , MD • August 24, 2019
A new electrode and the great schismatics on your website. The only thing that took some time was removing the 2 screws in burner pan. Once removed it was very easy to fix.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB16K13