Kenmore Range 362.72676790 (36272676790, 362 72676790) Parts
Genuine Ge part
By: Ge
Part Number: WB1K56
This small metal clip secures the surface burner spark electrode to its bracket or burner base, holding the tip at the proper gap for reliable ignition. Replace a missing, bent, or corroded clip to help restore consistent sparking.
- Holds the surface burner spark electrode firmly in position near the burner head
- Maintains correct alignment and gap so the igniter can spark to the burner
- Can help with delayed ignition, intermittent sparking, or a burner that won't light
- Typical signs include a loose/wobbly electrode, visible damage, or a missing clip
What's included: 1 mounting clip Install notes:
- Disconnect power and shut off gas before servicing
- Lift the cooktop or remove burner components to access the electrode; note clip orientation
- Transfer the electrode into the new clip and seat the clip securely in its bracket or base
- Avoid stressing the electrode's ceramic insulator; verify the tip is aimed at the burner rim and test ignition
Do-It-Yourself Stories from Customers like You
Gas burner would not start Eileen L. • Hebron , MD • August 24, 2019
A new electrode and the great schismatics on your website. The only thing that took some time was removing the 2 screws in burner pan. Once removed it was very easy to fix.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB9K5
Do-It-Yourself Stories from Customers like You
Broken oven door spring. Mario P. • Cornwall , NY • April 22, 2023
Simple, replaced with a new one which was delivered sooner than expected. thank you
Read more
More
Genuine Ge part
By: Ge
Part Number: WB2K20
Anti-tip bracket kit installs to the floor behind your range or wall oven to prevent tipping. Replace if missing, damaged, or moving to a new home.
More
Genuine Ge part
By: Ge
Part Number: WB16K13
Genuine Ge part
By: Ge
Part Number: WB49K2
Do-It-Yourself Stories from Customers like You
Burned on pans Cheryl R. • Piney Creek , NC • October 30, 2015
New pans
Read more
More
Genuine Ge part
By: Ge
Part Number: WB10K13
This support rivet securely fastens internal components within your range or oven structure. It provides structural stability for mounting brackets and panels inside the appliance. Replace this rivet if you notice loose parts rattling inside your oven or range components shifting during use.
More
Genuine Ge part
By: Ge
Part Number: WB32K5
Do-It-Yourself Stories from Customers like You
Oven would not light David A. • San Jose , CA • December 14, 2017
Control board, new oven light fixture, and receptacle along with the gasket. All I ever ask is get me the correct parts and AppliancePartsPros.com came through. Used them before to fix my gas dryer.
Cheers, David
Read more
More
Genuine Ge part
By: Ge
Part Number: WB28K146
Do-It-Yourself Stories from Customers like You
Needed to go from natural gas to propane Lizel C. • Windsor , CA • August 24, 2016
ORDERED ORPHASES
Read more
More
Genuine Ge part
By: Ge
Part Number: WB2K11
Genuine Ge part
By: Ge
Part Number: WB2X1082
This retainer secures the oven door hinges in place and is located at the bottom corners of the oven door frame. Replace if the oven door sags, won't stay closed properly, or if the hinges appear loose or misaligned.
Do-It-Yourself Stories from Customers like You
Broken door hinge. Shari W. • Evansville , IN • February 07, 2018
By replacing the hinge.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB14K5
Pivot pin that connects the oven door hinge to its mounting bracket. Replace if worn, broken, or missing to restore smooth door operation and alignment.
More
Genuine Ge part
By: Ge
Part Number: WB21K20
Do-It-Yourself Stories from Customers like You
Bab gas valve Robert S. • East Northport , NY • November 21, 2016
Ordered replacement valve from ApplianceParts.com and reapired it myself.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB53K35
Do-It-Yourself Stories from Customers like You
The panel on the oven bottom was pitted and needed to be replaced Kenneth W. • Buffalo , MN • November 29, 2014
Simple as can be. Took 2 screws out, pulled out the old panel, and put the new one in. Done in five mintures
Read more
More
Genuine Ge part
By: Ge
Part Number: WB10K14
Genuine Ge part
By: Ge
Part Number: WB16K10
Genuine Ge part
By: Ge
Part Number: WB16K11