Kenmore Range 362.7516192 (3627516192, 362 7516192) Parts
Genuine Ge part
By: Ge
Part Number: WB13K21
The Oven Igniter is an OEM replacement part for GE ovens, designed to ignite the bake igniter to start the heating process. This part is responsible for creating the spark that ignites the gas, providing the heat needed to cook and bake food. Over time, the oven igniter can wear out or become damaged, which can prevent the oven from heating.
Symptoms of a bad Oven Igniter include:
- The oven not heating up at all.
- The oven taking longer than normal to heat.
- Gas smell in the oven due to gas being released without ignition.
- A clicking sound without the oven igniting.
Causes of a bad igniter can include normal wear and tear over time, exposure to excessive heat or moisture, or physical damage from impact or mishandling.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
IMPORTANT: The connector plug may need to be cut off and igniter wires connected to range wires using porcelain wire connectors.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Little to no heat when baking
-
Gas igniter glows, but will not light
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Oven burner would not light broiler burner would light Michael C. • Austin , TX • January 25, 2015
If the oven burner would not light but the broiler would this indicated that the safety valve is OK. Problem had to be with the igniter. Removed the bottom panel in the oven and restarted the oven. The igniter would not glow at all. It should be brilliant red.
This is where the problem came in. I could not find the location of the model on the Kenmore range anywhere you would normally look - the back, the wiring envelope, the oven door jamb etc. Also the igniter cannot be removed from...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB35X29720
Seals your oven door to retain heat and maintain proper cooking temperature. Replace if torn, brittle, or heat escapes. Clips into place in minutes.
Do-It-Yourself Stories from Customers like You
Oven gasket was loose on one side(gasket torn around clips) Nathan E. • Cheboygan , MI • May 09, 2015
Ordered New Gasket and installed in about 3-4 Minutes. Only need small pliers to remove some of old clips from holes. New Gasket clipped in easily by hand.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB48T10095
Replacement oven rack for electric and gas ranges. Installs inside oven cavity. Needed when original rack is missing, damaged, or warped from use.
Do-It-Yourself Stories from Customers like You
Stove was missing rack Jack S. • Cloverdale , CA • December 30, 2014
Orded rack by stove model number. fit perfect
Read more
More
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
Genuine Ge part
By: Ge
Part Number: WB20K8
Oven not reaching set temperature or won't turn off? The thermostat regulates oven heat. DIY repair typically takes 30-60 minutes with basic tools.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Oven came on with the temperature dial in the off position and wouldn't turn off Jason V. • Lake Worth , FL • January 13, 2016
The repair was relatively simple and quick. The only part required was a new oven thermostat assembly and the tools I used for my model was a flathead screwdriver, cross-point screwdriver, torque bit and 1/4 inch socket using a bit driver. To complete the repair, I did the following:
1. Remove all top stove burner pieces and place to the side. Remove the 3 three screws (torque bit) in each of the 4 burner locations. That will allow the top lid to separate from the main unit later.
2. Pull...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1X1293
Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.
Do-It-Yourself Stories from Customers like You
Failure to hold temperature after preheating. Michael D. • Wilmington , DE • January 07, 2023
I was getting really frustrated with our oven. It would preheat to the correct temperature, then slowly lose heat until it was down to about 200 degrees. So it took about two hours to heat a pizza!
Finally decided to repair the oven myself, rather than pay $300.00 to have a repair person come out. Ordered the replacement igniter from AppliancePartsPros.com, and it arrived in two days.
I followed the instructional video on the AppliancePartsPros.com website, and it was going well until I...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB13K18
Fix burners that won't light or click continuously. This igniter electrode sparks to light gas burners. Easy 5-10 minute repair with a screwdriver.
Do-It-Yourself Stories from Customers like You
Stovetop kept clicking but no flame Jeffrey W. • Kendall Park , NJ • June 12, 2014
Did some research to find out it was the electrode. Pulled out the old one to match what was on your site. It came in no time at all, and the replacement was a cinch.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB2K15
The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.
Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.
Symptoms of a bad Bumper include:
- Excessive noise
- Difficulty in sliding the drawer
- Misalignment
- Wear, and increased friction
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bumbers on stove top grates failed due to time of use Howard V. • Baton Rouge , LA • February 14, 2016
Looked for the parts at this site and ordered those need plus spares
Read more
More
Genuine Ge part
By: Ge
Part Number: WB18K10036
Replacement power cord for gas ranges. Connects your unit to the wall outlet. Replace if cord is worn, cut, heat-damaged, or causing burning smells.
Do-It-Yourself Stories from Customers like You
Worn out power cord Carmen C. • Corona , CA • September 02, 2016
I purchased a new power cord and installed it myself.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB56K5
Replaces cracked, shattered, or heat-damaged inner glass pane in your range oven door. Restores insulation, visibility, and protects from spills.
Do-It-Yourself Stories from Customers like You
Broken oven inner door glass James S. • Lewes , DE • August 15, 2015
We were renting a vacation house on the bay and discovered that the oven door inner glass was broken. (There are two glasses inside the glass oven door. Only one was broken.)
AppliancePartsPro tech support was fast and efficient on the phone; part arrived via FedEx and on time.
The oven door glass replacement was easy. I needed a T-25 screw driver for the screws inside the door. I used a stainless steel scrub pad to clean the existing glass - no scratches. Looks like BRAND NEW!
Thank you...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10065
Size: 10-32 GXTT FLP.595 S
Do-It-Yourself Stories from Customers like You
Broken shelf fixed fast! Liza B. • Concord , NC • May 06, 2019
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes.
Thanks so much!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1K5062
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
Do-It-Yourself Stories from Customers like You
Cooktop needed aesthetic overhaul. Barbara B. • Wyncote , PA • March 26, 2020
I replaced damaged burner bowls (drip pans), now my cooktop looks like new!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1X5364
Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.
More
Genuine Ge part
By: Ge
Part Number: WB1K5119
Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
Dirty burner assemblies and worn and flakig burner grates Yvonne R. • Fernley , NV • March 11, 2015
Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02K10073
Secures the thermostat sensing bulb to the oven cavity wall for accurate temperature control. Replace if missing or damaged to prevent sagging bulb.
More
Genuine Ge part
By: Ge
Part Number: WB2K14
Spacer that fits between mating parts in your range or oven to maintain proper clearance and alignment. Replace if worn, missing, or damaged to prevent rubbing.
More