Kenmore Range 362.75208891 (36275208891, 362 75208891) Parts
Genuine Ge part
By: Ge
Part Number: WB1X5364
Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.
More
$10.33
- Compare At:
-
$12.29
- You Save:
-
$1.96
Genuine Ge part
By: Ge
Part Number: WB1K5119
Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
Dirty burner assemblies and worn and flakig burner grates Yvonne R. • Fernley , NV • March 11, 2015
Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts.
Read more
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB02K10073
Secures the thermostat sensing bulb to the oven cavity wall for accurate temperature control. Replace if missing or damaged to prevent sagging bulb.
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Ge part
By: Ge
Part Number: WB2K14
Spacer that fits between mating parts in your range or oven to maintain proper clearance and alignment. Replace if worn, missing, or damaged to prevent rubbing.
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Genuine Ge part
By: Ge
Part Number: WB1X5731D
Includes 12 screws.
Do-It-Yourself Stories from Customers like You
Broken front glass door Roni T. • Sayreville , NJ • February 12, 2019
I was very pleased to get the glass on time and it was a perfect match. The only thing I had trouble was to get the screws required to fix. The screws were not available, so spend too much time trying find equivalent screws in homedepot.
Read more
More
$25.74
- Compare At:
-
$30.89
- You Save:
-
$5.15
Genuine Ge part
By: Ge
Part Number: WB7K263
This is a black plastic end cap that attaches to the right side of the oven door vent trim on a range. It provides a finished appearance and helps direct airflow through the door vent area. Replace this end cap if it is cracked, broken, discolored, or missing, which can affect the look of the range and proper venting around the oven door.
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB01K10002
Genuine Ge part
By: Ge
Part Number: WB1K8
Replacement mounting screw that secures the thermostat assembly to your range cabinet. Replace if stripped, missing, or damaged during repair work.
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB1K63
Replacement mounting screw for electric and gas ranges. Secures internal components and panels. Needed when original screws are stripped, missing, or lost.
More
$36.95
- Compare At:
-
$43.97
- You Save:
-
$7.02
Genuine Ge part
By: Ge
Part Number: WB2K12
Metal safety bracket that secures freestanding ranges to the floor or wall. Replace if bent, broken, or missing to prevent appliance tipping hazards.
More
$7.66
- Compare At:
-
$9.12
- You Save:
-
$1.46
Genuine Ge part
By: Ge
Part Number: WB1K10
Cushions and secures your range or oven door handle to the door surface. Replace if cracked, worn, or missing to eliminate handle rattling and restore snug fit.
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB28K10030
Burner orifice spud for gas range conversion between natural gas and LP. Replace broken, missing, or incorrect size orifices when converting fuel type.
Do-It-Yourself Stories from Customers like You
Propane to natural gas conversion on range and dryer Vincent P. • Howell , NJ • October 09, 2014
Confirmed parts needed through online chat with tech and followed video instructions for dryer conversion. Found a video online for range conversion. Replaced orifices for stove top and adjusted oven burner orifices and air shutters and inverted pin in pressure regulator to natural gas position. All went well with no problems, about an hour and a half to gather tools and complete both jobs. Probably could be done faster but I was taking my time.
Read more
More
$20.95
- Compare At:
-
$31.09
- You Save:
-
$10.14
Genuine Ge part
By: Ge
Part Number: WB1K2
Do-It-Yourself Stories from Customers like You
Missing clips Kathy I. • Port Huron , MI • January 11, 2015
Removed bottom tray then pushed clips over ledge
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB1K45
Do-It-Yourself Stories from Customers like You
I replaced the cooktop in my range. Carol Z. • Bronx , NY • November 02, 2020
My 12 year-old cooktop was rusted through in a couple of key places, but the rest of my range was in terrific shape, so I decided to order a replacement cooktop. The perfect part arrived quickly. When I took a closer look at the few connecting parts I thought I was going to pirate off the old cooktop, I saw some were rusty, particularly the two Guide Slides and one screw. I needed to buy a set of star drivers, too, as a #10 was needed. I put a little WD40 on the parts I had to remove when I...
Read more
More
$9.91
- Compare At:
-
$10.90
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB1K62
This painted screw head is a cosmetic and protective cap that restores the finished look where a visible screw is used. It covers the screw head and helps match surrounding black trim for a clean appearance. What it does:
- Covers and conceals a screw head to improve appearance of panels, trim, or bezels
- Helps protect the screw head from direct exposure and reduces visible wear
- Used when trim or panels show exposed or mismatched screw heads
- Common fix when screw heads are scratched, discolored, or visually distracting
What's included: One painted black screw head. Install notes:
- Use the matching screw and press or snap the cap into place over the screw head
- Disconnect power and remove any panels only as recommended by your appliance manual before working near electrical components
- Avoid forcing or prying the cap; if tight, gently ease it on to prevent breakage
- Replace any damaged caps with the exact part to maintain fit and finish
More
$9.91
- Compare At:
-
$10.90
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB2K66
Right-side guide support secures sliding drawer or shelf rails on your range. Replace if cracked, broken, or worn to restore smooth tracking and alignment.
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51