Kenmore Range 362.75329102 (36275329102, 362 75329102) Parts
Genuine Ge part
By: Ge
Part Number: WB1K45
Do-It-Yourself Stories from Customers like You
I replaced the cooktop in my range. Carol Z. • Bronx , NY • November 02, 2020
My 12 year-old cooktop was rusted through in a couple of key places, but the rest of my range was in terrific shape, so I decided to order a replacement cooktop. The perfect part arrived quickly. When I took a closer look at the few connecting parts I thought I was going to pirate off the old cooktop, I saw some were rusty, particularly the two Guide Slides and one screw. I needed to buy a set of star drivers, too, as a #10 was needed. I put a little WD40 on the parts I had to remove when I...
Read more
More
$5.95
- Compare At:
-
$8.36
- You Save:
-
$2.41
Genuine Ge part
By: Ge
Part Number: WB2K36
Secures your range power cord at cabinet entry to prevent wire damage and disconnection. Replace if cord is loose or clamp is cracked. Confirm fit with your model number.
More
$7.00
- Compare At:
-
$8.36
- You Save:
-
$1.36
Genuine Ge part
By: Ge
Part Number: WB2K66
Right-side guide support secures sliding drawer or shelf rails on your range. Replace if cracked, broken, or worn to restore smooth tracking and alignment.
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Ge part
By: Ge
Part Number: WB32K2
Cushions your range oven door perimeter to prevent metal contact and reduce heat loss. Replace when worn, compressed, or door closes harshly. Confirm fit.
More
$14.95
- Compare At:
-
$40.56
- You Save:
-
$25.61
Genuine Ge part
By: Ge
Part Number: WB39K16
Drawer slide rail for electric and gas ranges. Mounts to the drawer box to enable smooth gliding. Replace if bent, broken, or worn for proper operation.
More
$20.95
- Compare At:
-
$30.75
- You Save:
-
$9.80
Genuine Ge part
By: Ge
Part Number: WB02K10245
Secures the door panel to your range. Replace if the bracket is bent, cracked, or broken, causing the door to sag or misalign during use.
More
$8.70
- Compare At:
-
$9.57
- You Save:
-
$0.87
Genuine Ge part
By: Ge
Part Number: WB34K5
Protective wire cover for range burner igniter wires. Replaces cracked, broken, or missing covers. Shields wiring from damage inside the range cabinet.
Do-It-Yourself Stories from Customers like You
Degraded burner igniter wires Richard W. • Bakersfield , CA • August 19, 2016
Checked online instructions for range top ands rear upright removal. Cleaned inside surfaces before removing individual wires one at a time. Ran the new wires through retainers first, then to the correct igniters next. Replaced removed parts to restore.
Note: The remove the top burner screws from the cook top before trying to remove it. Otherwise, you will bend the burner gas supply tubes and possibly damage them if not done in sequence.
Utube mentioned using a screwdriver for the cook top...
Read more
More
$7.40
- Compare At:
-
$16.04
- You Save:
-
$8.64
Genuine Ge part
By: Ge
Part Number: WB01K10008
Cooktop mounting screw secures the cooktop to frame or brackets. Replace if stripped, missing, or rusty to eliminate wobble, rattling, or lifted corners.
Do-It-Yourself Stories from Customers like You
Burner was not working evenly Stephanie M. • Hubbard , IA • April 15, 2019
I used the parts ordered, minus the screw because it was not the right one, and replaced the burner. I just took the old parts off and put the new parts on. Super easy fix!
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB34K10086
Stamped metal shield that protects the oven's lower cavity and insulation from excessive heat. Replace if cracked, rusted, corroded, or damaged.
More
$104.16
- Compare At:
-
$121.03
- You Save:
-
$16.87
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB1K5
Size: 8-18 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Oven not lighting John D. • Orlando , FL • January 16, 2024
We replaced the igniter. To do the job right you need to pull the oven off the wall (this was the 6 burner with griddle dual oven). you need to get to the igniter plug by taking off the entire back.... easier than it sounds... the hardest part is sliding the stove out and back in... I only need a 1/4 in driver for the whole job.... it is easier if you take the oven doors off...
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WZ4X345D
$21.95
- Compare At:
-
$26.34
- You Save:
-
$4.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB07K10003
Black right-side end cap that finishes and secures trim, rail, or channel ends on your range. Replace if cracked, broken, or missing to restore fit.
More
$59.48
- Compare At:
-
$70.19
- You Save:
-
$10.71
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB1K53
Mounting screw that secures the hinge assembly on electric and gas ranges. Replace this fastener if the original is stripped, missing, or damaged.
More
$4.58
- Compare At:
-
$8.36
- You Save:
-
$3.78
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB1K62
This painted screw head is a cosmetic and protective cap that restores the finished look where a visible screw is used. It covers the screw head and helps match surrounding black trim for a clean appearance. What it does:
- Covers and conceals a screw head to improve appearance of panels, trim, or bezels
- Helps protect the screw head from direct exposure and reduces visible wear
- Used when trim or panels show exposed or mismatched screw heads
- Common fix when screw heads are scratched, discolored, or visually distracting
What's included: One painted black screw head. Install notes:
- Use the matching screw and press or snap the cap into place over the screw head
- Disconnect power and remove any panels only as recommended by your appliance manual before working near electrical components
- Avoid forcing or prying the cap; if tight, gently ease it on to prevent breakage
- Replace any damaged caps with the exact part to maintain fit and finish
More
$6.11
- Compare At:
-
$8.36
- You Save:
-
$2.25
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB2X2030
Mounting clip secures appliance components to prevent movement and wear. Replace if parts shift, vibrate, or become loose. Verify fit with your model number.
More
$14.65
- Compare At:
-
$19.72
- You Save:
-
$5.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB34K14
Protective shield that covers the oven igniter. Replace if cracked, broken, or missing to shield the igniter from spills, drips, and falling debris.
Do-It-Yourself Stories from Customers like You
Lost igniter cover plate. Larry F. • Grand Prarie , TX • November 11, 2023
During the oven Igniter's replacement, I lost the cover plate for the broiler Igniter. Also during the oven Igniter replacement, I discovered that the last Tech to work on the Igniter had lost a screw and the Igniter was being held on by one screw.
After carefully researching my problem I landed on the AppliancePartsPros.com website and found exactly what I needed. Made my order, and received my parts pretty fast. Everything is fixed and I'm assured that it's done correctly this time.
Read more
More
$15.59
- Compare At:
-
$18.55
- You Save:
-
$2.96
Out Of Stock
Usually ships within 4 - 14 days