Kenmore Range 362.75478691 (36275478691, 362 75478691) Parts
Genuine Ge part
By: Ge
Part Number: WB1K5062
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
Do-It-Yourself Stories from Customers like You
Gas burner would not start Eileen L. • Hebron , MD • August 24, 2019
A new electrode and the great schismatics on your website. The only thing that took some time was removing the 2 screws in burner pan. Once removed it was very easy to fix.
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Ge part
By: Ge
Part Number: WB1X5364
Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.
More
$10.33
- Compare At:
-
$12.29
- You Save:
-
$1.96
Genuine Ge part
By: Ge
Part Number: WB1K5119
Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
Dirty burner assemblies and worn and flakig burner grates Yvonne R. • Fernley , NV • March 11, 2015
Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts.
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Ge part
By: Ge
Part Number: WB48K2
Slotted grid that rests over the broiler pan to support food during broiling. Replace if cracked, warped, worn, or missing to restore proper function.
Do-It-Yourself Stories from Customers like You
Needed a new broiler pan assembly Ken M. • Auburn , CA • January 03, 2021
The fix isn't as important as my ording experiance. Thank you to AppliancePartsPros.com. "Great,Outstanding Service", best I have experienced yet. Online ordering was a breeze and same day shipping turned a forcasted 8 day delivery into only 3, with standard shipping no less, FedEx. Easy to navigate web experience which made the process painless. I highly recommend AppliancePartsPros.com for any Appliance needs. Thank you so very much. Ken M. Auburn Ca.
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Ge part
By: Ge
Part Number: WB2K14
Spacer that fits between mating parts in your range or oven to maintain proper clearance and alignment. Replace if worn, missing, or damaged to prevent rubbing.
More
Genuine Ge part
By: Ge
Part Number: WB1X5731D
Includes 12 screws.
Do-It-Yourself Stories from Customers like You
Broken front glass door Roni T. • Sayreville , NJ • February 12, 2019
I was very pleased to get the glass on time and it was a perfect match. The only thing I had trouble was to get the screws required to fix. The screws were not available, so spend too much time trying find equivalent screws in homedepot.
Read more
More
$25.74
- Compare At:
-
$30.89
- You Save:
-
$5.15
Genuine Ge part
By: Ge
Part Number: WB2K27
Secures range door handles and attaches components. Replace when cracked, bent, or missing to restore stable grip. Confirm fit with your model number.
More
$55.95
- Compare At:
-
$58.94
- You Save:
-
$2.99
Genuine Ge part
By: Ge
Part Number: WB7K263
This drum end cap supports the dryer drum and helps keep it aligned for smooth rotation. Replacing a worn or damaged end cap restores drum positioning to reduce rubbing, noise and uneven wear. What it does:
- Supports and locates the drum at the cabinet end to maintain proper alignment
- Helps the drum rotate smoothly and reduces rubbing or scraping sounds
- Prevents excess wear on the drum edge and adjacent supports
- Common symptom: noisy or wobbling drum that may rub against the cabinet
What's included:
Install notes:
- Disconnect power to the appliance before beginning any repair
- Access typically requires removing the dryer front or cabinet panels; keep track of fasteners
- Inspect adjacent parts (glides, rollers, bearings or seals) and replace if worn
- Test the dryer on a short cycle after reassembly to ensure smooth drum rotation
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Ge part
By: Ge
Part Number: WB1K5
Size: 8-18 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Oven not lighting John D. • Orlando , FL • January 16, 2024
We replaced the igniter. To do the job right you need to pull the oven off the wall (this was the 6 burner with griddle dual oven). you need to get to the igniter plug by taking off the entire back.... easier than it sounds... the hardest part is sliding the stove out and back in... I only need a 1/4 in driver for the whole job.... it is easier if you take the oven doors off...
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Ge part
By: Ge
Part Number: WB1K84
Single fastening screw for range components. Replaces missing, stripped, or damaged screws that secure panels, brackets, and trim pieces in place.
Do-It-Yourself Stories from Customers like You
My gas stove was missing parts on the big burner Paulajean P. • Middle Island , NY • January 23, 2017
I went on Appliance Parts Pro and looked up my stove model. Then I looked on the parts diagrams and found the parts I needed. I ordered the parts and they came really fast. I was amazed. I installed the parts and my burner works the way it's suppose to !
Thank you Appliance Parts Pro !!!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB2K24
Protective cover that slips over the gas valve shaft to shield valve components from spills, food debris, and moisture. Replace if cracked or missing.
More
Genuine Ge part
By: Ge
Part Number: WB1K63
Replacement mounting screw for electric and gas ranges. Secures internal components and panels. Needed when original screws are stripped, missing, or lost.
More
$36.95
- Compare At:
-
$43.97
- You Save:
-
$7.02
Genuine Ge part
By: Ge
Part Number: WB2K12
Metal safety bracket that secures freestanding ranges to the floor or wall. Replace if bent, broken, or missing to prevent appliance tipping hazards.
More
$7.66
- Compare At:
-
$9.12
- You Save:
-
$1.46
Genuine Ge part
By: Ge
Part Number: WB1K2
Do-It-Yourself Stories from Customers like You
Missing clips Kathy I. • Port Huron , MI • January 11, 2015
Removed bottom tray then pushed clips over ledge
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Ge part
By: Ge
Part Number: WB1K44
Replacement mounting screw for electric and gas range panels, trim, and brackets. Needed when original fastener is stripped, missing, or damaged.
Do-It-Yourself Stories from Customers like You
Oven lock failed so self cleaning unit would not engage Alice L. • Martinez , CA • September 17, 2018
Replaced old lock and installed replacement lock and now have a happy wife.
Read more
More
$7.00
- Compare At:
-
$8.36
- You Save:
-
$1.36
Genuine Ge part
By: Ge
Part Number: WB1K45
Do-It-Yourself Stories from Customers like You
I replaced the cooktop in my range. Carol Z. • Bronx , NY • November 02, 2020
My 12 year-old cooktop was rusted through in a couple of key places, but the rest of my range was in terrific shape, so I decided to order a replacement cooktop. The perfect part arrived quickly. When I took a closer look at the few connecting parts I thought I was going to pirate off the old cooktop, I saw some were rusty, particularly the two Guide Slides and one screw. I needed to buy a set of star drivers, too, as a #10 was needed. I put a little WD40 on the parts I had to remove when I...
Read more
More
$5.95
- Compare At:
-
$8.36
- You Save:
-
$2.41