Kenmore Range 362.75702002 (36275702002, 362 75702002) Parts
Genuine Ge part
By: Ge
Part Number: WB07K10005
White plastic end cap for the right side of your range. Replaces old, yellowed, cracked, or broken trim pieces. Restores a clean appearance.
Do-It-Yourself Stories from Customers like You
It looked old Alex M. • Battle Ground , WA • November 04, 2014
Replaced the old for the new
Read more
More
$70.95
- Compare At:
-
$83.72
- You Save:
-
$12.77
Genuine Ge part
By: Ge
Part Number: WB07K10007
White plastic end cap that installs on the left side of your range control panel. Replaces cracked, yellowed, broken, or missing trim pieces.
Do-It-Yourself Stories from Customers like You
Broken end caps. Gary S. • Missouri City , TX • July 23, 2017
Replaced the part, and matching part on the other end.
Read more
More
$70.95
- Compare At:
-
$85.14
- You Save:
-
$14.19
Genuine Ge part
By: Ge
Part Number: WB1K5062
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
Do-It-Yourself Stories from Customers like You
Intermittant clicking of ignitor Sharon K. • Chandler , AZ • May 09, 2016
My husband gets irked when I take it upon myself to do appliance repair. This isn't my first project. I looked at various websites and found this one very helpful. Information was consistent with what the GEappliance website had. Video instilled confidence that the job could be simply done. Price was right and a new ignitor module was installed; easy peasy! Appliance works like new!
Read more
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB1X5364
Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.
More
$10.33
- Compare At:
-
$12.29
- You Save:
-
$1.96
Genuine Ge part
By: Ge
Part Number: WB1K5119
Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
Dirty burner assemblies and worn and flakig burner grates Yvonne R. • Fernley , NV • March 11, 2015
Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts.
Read more
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB34K10014
Color: Gray. Left hand side
Do-It-Yourself Stories from Customers like You
Abused grates and oven bottom Adrienne T. • Port Jervis , NY • June 26, 2015
Ordered parts ( very easy) and replaced old ones . Pop out, pop in. Simple but it made my stove and oven new again.
Read more
More
$168.50
- Compare At:
-
$202.20
- You Save:
-
$33.70
Genuine Ge part
By: Ge
Part Number: WB01K10093
This speed nut is a clip-on fastener that provides threads for a screw on the appliance. It secures sheet-metal panels, brackets, or trim and helps keep assemblies tight under vibration and repeated use.
- Provides captive threads so a screw can tighten into thin sheet metal
- Helps secure panels, brackets, and trim pieces in place
- Replace if a screw spins without tightening, a panel rattles/feels loose, or the original clip is missing or damaged
- Restores a snug, reliable attachment point without a loose nut
What's included: One speed nut Install notes:
- Disconnect power and, if applicable, shut off gas; allow the appliance to cool before servicing
- Note the clip's orientation; slide it onto the panel edge or stud as designed
- Start the screw by hand to avoid cross-threading; do not overtighten
- Wear cut-resistant gloves when handling sheet-metal parts
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Ge part
By: Ge
Part Number: WB24K5022
Oven light switch.
Do-It-Yourself Stories from Customers like You
Rocker switch failed in the "on" position had to get a ge part for a magic chef oven John B. • Seabrook , TX • January 25, 2016
Slid the oven out. Opened the control panel. Shut the power off. Replaced the switch. reversed the steps.
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Ge part
By: Ge
Part Number: WB2K14
Spacer that fits between mating parts in your range or oven to maintain proper clearance and alignment. Replace if worn, missing, or damaged to prevent rubbing.
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Genuine Ge part
By: Ge
Part Number: WB01X23501
Genuine Ge part
By: Ge
Part Number: WB1X5731D
Includes 12 screws.
Do-It-Yourself Stories from Customers like You
Broken front glass door Roni T. • Sayreville , NJ • February 12, 2019
I was very pleased to get the glass on time and it was a perfect match. The only thing I had trouble was to get the screws required to fix. The screws were not available, so spend too much time trying find equivalent screws in homedepot.
Read more
More
$25.74
- Compare At:
-
$30.89
- You Save:
-
$5.15
Genuine Ge part
By: Ge
Part Number: WB01K10002
Genuine Ge part
By: Ge
Part Number: WB2K24
Protective cover that slips over the gas valve shaft to shield valve components from spills, food debris, and moisture. Replace if cracked or missing.
More
$35.57
- Compare At:
-
$42.33
- You Save:
-
$6.76
Genuine Ge part
By: Ge
Part Number: WB39K20
Secures the lower storage drawer assembly to your range cabinet. Replace this stamped metal bracket if cracked, bent, or missing to restore alignment.
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Genuine Ge part
By: Ge
Part Number: WB07K10001
White plastic end cover for the right side of your range. Replaces cracked, broken, or discolored endcaps to restore a finished appearance.
More
$8.57
- Compare At:
-
$18.72
- You Save:
-
$10.15
Genuine Ge part
By: Ge
Part Number: WB28K10030
Burner orifice spud for gas range conversion between natural gas and LP. Replace broken, missing, or incorrect size orifices when converting fuel type.
Do-It-Yourself Stories from Customers like You
Propane to natural gas conversion on range and dryer Vincent P. • Howell , NJ • October 09, 2014
Confirmed parts needed through online chat with tech and followed video instructions for dryer conversion. Found a video online for range conversion. Replaced orifices for stove top and adjusted oven burner orifices and air shutters and inverted pin in pressure regulator to natural gas position. All went well with no problems, about an hour and a half to gather tools and complete both jobs. Probably could be done faster but I was taking my time.
Read more
More
$20.95
- Compare At:
-
$31.09
- You Save:
-
$10.14