Kenmore Dishwasher 363.14371790 (36314371790, 363 14371790) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10282479
Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.
More
$20.95
- Compare At:
-
$24.72
- You Save:
-
$3.77
Genuine Ge part
By: Ge
Part Number: WD8X228
The Tub Corner Baffle is an OEM part for GE dishwashers. This rubber component is placed in the corners of the dishwasher tub to prevent water from leaking out during the wash cycle. It acts as a barrier, directing water back into the tub and ensuring
Do-It-Yourself Stories from Customers like You
Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman".
I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it...
Read more
More
$16.57
- Compare At:
-
$24.06
- You Save:
-
$7.49
Genuine Ge part
By: Ge
Part Number: WD8X227
The Tub Corner Baffle is an OEM part for GE dishwashers. It is strategically placed at the corners of the dishwasher tub to prevent water from leaking out during operation. For the left side use WD8X228. Color: Black.
Symptoms of a ba
Do-It-Yourself Stories from Customers like You
Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman".
I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it...
Read more
More
$16.57
- Compare At:
-
$24.06
- You Save:
-
$7.49
Genuine Ge part
By: Ge
Part Number: WD12X10304
Secures the end of the dishwasher rack slide rail. Replace if cracked, broken, or missing to prevent racks from sliding off track or misaligning.
Do-It-Yourself Stories from Customers like You
Water would not drain Paula M. • Crestview Hills , KY • November 14, 2014
Replaced the pump drain assembly
Read more
More
$14.46
- Compare At:
-
$24.73
- You Save:
-
$10.27
Genuine Ge part
By: Ge
Part Number: WD12X10327
Replacement roller and stud assembly for dishwasher racks. Installs on upper or lower rack to restore smooth gliding. Needed when rollers crack or studs break.
Do-It-Yourself Stories from Customers like You
Clips on top rack of washer were worn out. Top rack would fall off..down Tamara K. • Richmond , MI • April 06, 2014
Ordered the clips that we easy to find on line.
They can within a few days..and replaced them myself..didn't wait for my husband. Hardest part was getting the end caps off the metal rack to replace the rollers and clips. They fit in there spmehow. I used a screwdriver to get them out. Rest was a piece of cake
Lol
Read more
More
$21.47
- Compare At:
-
$25.55
- You Save:
-
$4.08
Genuine Ge part
By: Ge
Part Number: WD1X1316
Fix a dishwasher that won't drain or keeps draining during fill. This solenoid armature controls the drain valve. DIY repair in about 45 minutes.
Do-It-Yourself Stories from Customers like You
Dishwasher wasn't draining Grace S. • Hartford , CT • August 02, 2019
About a year ago my dishwasher during a cycle was emitting a horrible plastic burning smell. We stopped it mid-cycle, cleaned it out and tried to run a few more cycles after that and realized it wouldn't drain so it sat in my kitchen broken for a year. I finally got so fed up with washing dishes by hand that I took the whole dishwasher apart. Confirmed there were no blockages in any of the hoses etc. when it still didn't work I googled the problem, found this website and found that it must be...
Read more
More
$31.41
- Compare At:
-
$37.06
- You Save:
-
$5.65
Genuine Ge part
By: Ge
Part Number: WD8X181
The Dishwasher Shaft Seal is an OEM part for GE dishwashers. This seal is located around the motor shaft and prevents water from leaking out of the dishwasher tub where the motor shaft enters.Seal for pump drain valve shaft. Instruction sheet included.
Do-It-Yourself Stories from Customers like You
My ge potscrubber dishwasher stopped washing dishes the soap from the container would just run down the door and the dishes would still be dirty Scott F. • Sanger , TX • January 23, 2016
Removing the bottom panel and watching the internals while the washer was running revealed a small drip from what appeared to be a plastic cam that was attached to a solenoid. The water was dripping from the shaft the cam attached to down into the solenoid. Being a DIY guy I pulled the washer out, turned it upside down and inspected the effected mechanism. It appeared that there was a seal on the shaft that was leaking. The water leaking into the solenoid caused it to rust and stick. A quick...
Read more
More
$31.57
- Compare At:
-
$37.57
- You Save:
-
$6.00
Genuine Ge part
By: Ge
Part Number: WR2X7054
The Push-On Nut is an OEM part for GE appliances. This small component is typically used to secure various fittings and fastenings within appliances, ensuring they are tightly held and do not loosen over time. Its push-on design allows for easy install
Do-It-Yourself Stories from Customers like You
My ge potscrubber dishwasher stopped washing dishes the soap from the container would just run down the door and the dishes would still be dirty Scott F. • Sanger , TX • January 23, 2016
Removing the bottom panel and watching the internals while the washer was running revealed a small drip from what appeared to be a plastic cam that was attached to a solenoid. The water was dripping from the shaft the cam attached to down into the solenoid. Being a DIY guy I pulled the washer out, turned it upside down and inspected the effected mechanism. It appeared that there was a seal on the shaft that was leaking. The water leaking into the solenoid caused it to rust and stick. A quick...
Read more
More
$9.42
- Compare At:
-
$11.30
- You Save:
-
$1.88
Genuine Ge part
By: Ge
Part Number: WD26X10013
Dishwasher not draining or leaving water in the bottom? This pump and motor assembly circulates and drains water. 2-hour DIY repair with video guide.
This part fixes the following symptoms
-
Won't start
-
Noisy
-
Will not drain
See more...
Do-It-Yourself Stories from Customers like You
It wasn`t pumping the water out Jimmy N. • Louisville , KY • August 05, 2014
I fixed it by installing a ge pump and motor assembly. it works fine
Read more
More
$193.95
- Compare At:
-
$263.74
- You Save:
-
$69.79
Genuine Ge part
By: Ge
Part Number: WD08X10016
Creates a watertight seal around your dishwasher door to prevent leaks during wash cycles. Replace if cracked, worn, or leaking. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Dishwarsher door gasket was worn out Richard K. • Clayton , OH • August 18, 2014
Ordered new one online. It came in 2 days with instructions. I installed it and works great.
Read more
More
$26.71
- Compare At:
-
$32.05
- You Save:
-
$5.34
Genuine Ge part
By: Ge
Part Number: WD28X265
Replacement silverware basket with handle for your dishwasher. Needed when original basket is cracked, broken, or has worn holes that let utensils fall through.
Do-It-Yourself Stories from Customers like You
The utensil basket of our dishwasher was broken at the bottom Glenn T. • Glens Falls , NY • November 23, 2014
We ordered the item appliance parts pros said would fit our make/model. the part arrived in perfect condition faster than i could possibly imagine, and while it fit our machine, it was a big bigger than the original and it fits off-center, but i guess it works fine! excellent speed and ease of ordering. thanks
Read more
More
$77.95
- Compare At:
-
$92.76
- You Save:
-
$14.81
Genuine Ge part
By: Ge
Part Number: WD16X313
Dishwasher detergent cup won't stay closed or won't open fully? This soap dispenser lever controls detergent release. DIY repair in 15 minutes.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
$22.95
- Compare At:
-
$27.08
- You Save:
-
$4.13
Genuine Ge part
By: Ge
Part Number: WD16X10011
Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WD12X271
Replace broken or missing lower dishrack rollers and axles. Attaches to the bottom rack for smooth gliding when loading dishes. Sold as one roller kit.
Do-It-Yourself Stories from Customers like You
Bottom dishwasher rack needed new wheels Thomas C. • Alton , IL • December 19, 2014
I found my parts and ordered the six I needed, however I did not pick up on the difference from the front wheels to the rear wheels in the the descriptions. The rear wheels are narrower and I ordered all front wheels, six fronts instead of four front and two rear. I made it work by using the axle from the new wheel with two old narrow wheels.
Read more
More
$20.28
- Compare At:
-
$23.93
- You Save:
-
$3.65
Genuine Ge part
By: Ge
Part Number: WD12X10284
The Fill Cap Assembly is an OEM part for GE dishwashers. This assembly includes the cap that covers the opening where rinse aid or other additives are poured into the dishwasher. It ensures that the additives are securely contained and properly dispens
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
The cap was long gone for the rinse agent dispenser [fill cap assembly] Jennifer B. • Pacifica , CA • July 31, 2014
Using your program, I loaded the info re my trusty old dishwasher (not ready to abandon over a cap) and you located the proper cap to replace my old one that has been lost for years. [don't ask how that happened in the first place!] I really didn't think you would have a part for an 18-20 year old dishwasher. After ordering the replacement cap, it arrived within a few days. I was so excited that I could fix this problem myself without calling an expensive repairman! I simply removed the part...
Read more
More
$21.95
- Compare At:
-
$25.90
- You Save:
-
$3.95
Genuine Ge part
By: Ge
Part Number: WD16X297
Dispenser won't close or stay shut? This dishwasher detergent cup cover securely latches to prevent mid-cycle opening. Moderate DIY repair, 1 hour.
Do-It-Yourself Stories from Customers like You
Cover detergent cup would not close or stay closed Michael G. • Wareham , MA • October 01, 2019
Although I ordered the latch, lever and a new cup and replace the original pieces the dispenser still did not close. On further inspection it turned out to be a small spring that had fallen out of place. Once the spring was reconnected the dispensing cover worked fine. I'm still happy that I replaced the entire assembly with new parts regardless. Discovering the loose spring took the most time.
Read more
More
$14.66
- Compare At:
-
$17.59
- You Save:
-
$2.93