Kenmore Dishwasher 363.15561790 (36315561790, 363 15561790) Parts
Genuine Ge part
By: Ge
Part Number: WD13X67
Door won't close or latch properly? This latch keeper secures the door strike so your dishwasher stays closed during cycles. Quick DIY repair.
More
$13.40
- Compare At:
-
$37.06
- You Save:
-
$23.66
Genuine Ge part
By: Ge
Part Number: WD2X295
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WD31X10025
Color: White.
Do-It-Yourself Stories from Customers like You
My dishwasher did not match other appliances in new home Judith O. • Montgomery , AL • August 06, 2016
I ordered both the front long panel and the lower access panel in the new color. I watched the instructional videos which were very helpful. I was very careful to remember where all the screws belonged as I took it apart. The panel required an extra small attachment to fit due to a change in design. These were included in the box along with clear instructions. It took about an hour to put back together, but I encountered no problems. The dishwasher now looks great. If I had not found this...
Read more
More
$73.76
- Compare At:
-
$88.51
- You Save:
-
$14.75
Genuine Ge part
By: Ge
Part Number: WZ5X219D
Genuine Ge part
By: Ge
Part Number: WD3X487D
C-clip retainers secure components in your dishwasher or range. Replace when clips are loose, broken, or missing to prevent rattling and parts shifting. Verify fit with your model number.
More
$37.95
- Compare At:
-
$57.56
- You Save:
-
$19.61
Genuine Ge part
By: Ge
Part Number: WD12X10023
Replacement bracket that secures the flood switch in your dishwasher. Holds the leak detection switch in proper position. Needed when bracket is cracked or broken.
More
$19.61
- Compare At:
-
$23.34
- You Save:
-
$3.73
Genuine Ge part
By: Ge
Part Number: WD2X296
Size: 8-32 x 5/8 inch.
Do-It-Yourself Stories from Customers like You
Soap door would not lock closed Mark F. • Laguna Woods , CA • September 18, 2017
This happened after a repair man came out and replaced the timer. Not my doing landlord had a service contract. Once inspected I found when the timer was swapped he did not swap the cam over. Ordered the correct parts and repaired myself. Hard to find good help anymore.
Read more
More
$12.29
- Compare At:
-
$13.52
- You Save:
-
$1.23
Genuine Ge part
By: Ge
Part Number: WD02X22736
Secures panels, brackets, and hardware in your appliance. Replace when stripped, rusted, or missing to prevent looseness and vibration. Verify fit.
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WD3X767
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WD2X322
$10.42
- Compare At:
-
$12.30
- You Save:
-
$1.88
Genuine Ge part
By: Ge
Part Number: WD12X447
$48.47
- Compare At:
-
$48.89
- You Save:
-
$0.42
Genuine Ge part
By: Ge
Part Number: WD08X10015
Seals the bottom center of your dishwasher door to prevent leaks during wash cycles. Replace if water leaks from the door bottom. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman".
I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it...
Read more
More
$16.90
- Compare At:
-
$18.59
- You Save:
-
$1.69
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD12X418
Fix dishwasher leaks or poor cleaning with a new sump cap. Seals the sump opening to contain wash water and protect the pump. Quick DIY replacement.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$24.95
- Compare At:
-
$29.44
- You Save:
-
$4.49
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD1X1376
A replacement clamp that secures hoses or wiring to keep lines routed and stable, helping prevent rubbing, leaks and noise. Restores a reliable hold for tubing and harnesses so the appliance runs quietly and safely. What it does:
- Holds hoses, tubing or wire harnesses in place to reduce movement and chafing.
- Helps prevent leaks and water line abrasion caused by loose fittings.
- Reduces rattling or vibration from unsecured lines or cables.
- Keeps routing organized so adjacent components aren't stressed or worn.
What's included: One clamp. Install notes:
- Disconnect power before servicing the appliance; shut off water supply when working on water or drain lines.
- Remove the old clamp and position the replacement so it fully engages the hose or harness, avoiding twists.
- Use appropriate hand tools (pliers or screwdriver) and secure the clamp evenly; avoid overtightening.
- Inspect surrounding hoses and wiring for damage while installing; replace any components that show wear.
Do-It-Yourself Stories from Customers like You
Multiply holes in pump connector Richard H. • Highland , NY • October 31, 2014
Replaced connector. The job took about 1 hour, most of which was spent getting the machine out from under the counter. Replacing the actual part did not take long at all.
Read more
More
$21.50
- Compare At:
-
$25.37
- You Save:
-
$3.87
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD18X202
Routes water from inlet valve to tub. Replace if cracked, leaking at connections, or worn from age. Installs between valve and tub exterior connection point.
Do-It-Yourself Stories from Customers like You
Dishwasher was making loud noises from the bottom when running Alan R. • Rochester , NY • June 30, 2018
I replaced the pump and motor assembly. I also proactively replaced the fill hose while I had the dishwasher out since it was decades old.
GE now only sells a generic kit. There were about 7 different sets of directions for different groups of models, and myriad adapters and other parts to support all of them. I wish GE had provided a way of looking up which instructions to use based on model # as that would have saved me a lot of trouble sorting out the instructions, but I didn't find one....
Read more
More
$20.38
- Compare At:
-
$53.68
- You Save:
-
$33.30
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD02X10141
Replacement hex head screw for dishwasher component mounting. Secures solenoids, valves, and internal parts. Order when original is rusted, stripped, or missing.
Do-It-Yourself Stories from Customers like You
The drain solenoid on dishwasher leaked and rusted where wouldn't work Webster M. • Memphis , TN • September 19, 2014
Ordered complete solenoid kit, valve seal, and sol mounting screws. Watched repair video and it works great.
Read more
More
$9.24
- Compare At:
-
$10.16
- You Save:
-
$0.92
Out Of Stock
Usually ships within 4 - 14 days