Kenmore Refrigerator 363.9537723 (3639537723, 363 9537723) Parts

I removed ice maker, cleared out frozen food to make room for drill, removed broken support, & drilled out old pop rivet (covering the area below with a cloth to catch the metal shavings). Then I carefully straightened the metal support, loosely installed the new support, and pop-riveted it onto the support using the same size rivet. I reinstalled the ice maker, replaced the frozen food, and turned the ice maker back on. No issues. Read more

I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new. Read more

New switch for water dispenser and new inlet valve. Read more

I loosened all bracket screws around door inside edge. I removed the old seal and replace it with the new seal. The most difficult part was adjusting the seal properly. This required loosening the screws two or three at a time and pulling the rubber seal outwards from under the bracket. The seal was wrinkled coming out of the cardboard package. I followed the instructions dipping the seal in hot water and this relaxed the rubber removing the kinks. Read more

I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new. Read more

I have to replace the broken parts mentioned above and I replaced by installing the 3 parts above. I followed the youtube video that was shown with one of your parts on the web site. However, to an inexperience person like myself, I need someone to hold the door steady while I was working to remove and replace the parts above. It is simple enough for anyone to figure out what to do. just take pictures prior to the removal of any parts so it simplifies the installation of the replacement parts. Read more