Kenmore Refrigerator 363.9537824 (3639537824, 363 9537824) Parts
Genuine Ge part
By: Ge
Part Number: WR2X8933
Do-It-Yourself Stories from Customers like You
Clogged drain tube Keith P. • Ivoryton , CT • March 03, 2017
Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X211
Left side.
Do-It-Yourself Stories from Customers like You
Shelf in refrigerator needed to be replaced Daniel S. • Jacksonville , NC • September 29, 2018
Ordered parts from appliance parts pros and completed installation myself
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3160
This white dispenser grille covers the water and ice dispensing area on your refrigerator door, providing a finished appearance while protecting internal components. It frames the dispensing opening and may include integrated lighting or sensors. Replace if the grille is cracked, discolored, or broken, affecting both function and appearance.
Do-It-Yourself Stories from Customers like You
Dispenser auger was rusty and pitted Darrell M. • Fairfield , OH • May 23, 2015
Replaced it with a new auger. The repair video displayed on your site was a life saver. It simplified a complicated process. It resulted in a successful repair with far fewer swear words. :-)
I received the parts the afternoon of second day after ordering! AppliancePartsPros.com is now my new go to source for appliance parts.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3493
Genuine Ge part
By: Ge
Part Number: WR17X3670
Genuine Ge part
By: Ge
Part Number: WR2X7783
This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.
Do-It-Yourself Stories from Customers like You
Ice crusher repair GE Monogram counter depth. Glenn J. • El Cajon , CA • July 27, 2020
This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful.
The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger).
Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost).
The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X8989
Genuine Ge part
By: Ge
Part Number: WR9X499
Genuine Ge part
By: Ge
Part Number: WR01X10064
Genuine Ge part
By: Ge
Part Number: WR02X10395
Do-It-Yourself Stories from Customers like You
Water valve and defrost drain tube were bad. Richard W. • Jacksonville , FL • June 24, 2017
Replaced them both.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR12X952
Genuine Ge part
By: Ge
Part Number: WR14X451
This gasket seals the front edge of your refrigerator's crisper drawer or deli pan, maintaining proper humidity and temperature control inside the compartment. It prevents cold air from escaping and warm air from entering, keeping produce fresh longer. Replace if vegetables wilt quickly, the drawer frosts over, or if you see gaps around the drawer front.
More
Genuine Ge part
By: Ge
Part Number: WR14X456
Genuine Ge part
By: Ge
Part Number: WR17X10190
Do-It-Yourself Stories from Customers like You
Yellowing of handles and the recess portion of the water/ice dispenser recess Michael S. • Panama City Beach , FL • March 10, 2018
The handles were a simple fix. Just pop out the door trim, which I did by pulling on the very top and bottom of the trim to get it started. Then removed two star screws from the handle. I had to work the chrome plastic top and bottom handle caps off, then reversed the process for installing the new handle.
The Recess/Dispenser was a bit more tricky. I pried the trim and control panel off with a putty knife, then the rest was fairly obvious, such as removing screws and wiring connectors. ...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10282
Color: Black.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10340