Kenmore Refrigerator 363.9542613 (3639542613, 363 9542613) Parts
Genuine Ge part
By: Ge
Part Number: WR38X1840
$11.44
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR38X1843
$14.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR38X1844
$88.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR38X1846
$15.32
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR38X1992
$19.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR40X1679
$31.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR40X1680
$16.20
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR40X1741
This breaker strip trim installs along the freezer section edge of your refrigerator. Replace if cracked, broken, or missing to restore appearance.
More
$49.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR40X1742
Breaker strip trim for top freezer compartment door. Replace if cracked, broken, or missing to restore door seal and cabinet finish appearance.
More
$12.61
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR40X1745
$18.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR71X2124
Secures refrigerator shelves in place to keep food stable. Replacement support restores proper alignment and prevents sagging when original is cracked or broken.
More
$74.63
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR78X8494
$63.47
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WZ6X107D
$30.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR2X8474
Rubber grommet seals the ice maker fill tube where it enters the refrigerator cabinet. Replace if cracked, brittle, leaking, or missing to restore seal.
This part fixes the following symptoms
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Had a cracked plastic ice maker inlet water tube that flooded part of kitchen floor Terry C. • Durham , NC • February 16, 2019
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X209
The left Drawer Rail Slide is an OEM part for GE refrigerators. It provides smooth sliding action for refrigerator drawers, ensuring easy access and optimal storage management. This component guides the drawer in and out, preventing misalignment and supporting the weight of the drawer and its contents. It measures approximately 14 7/8 inches long.
Over time, the drawer rail slide can become worn or damaged, leading to issues with drawer movement. Common causes of a bad drawer rail slide include normal wear and tear from frequent use, damage from overloading the drawer, or physical impacts that cause misalignment or breakage.
Symptoms of a bad drawer rail slide include:
- Difficulty opening or closing the drawer
- Drawer not aligning properly
- Excessive noise when operating the drawer
- Drawer falling off the rails
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Note: For matching right-hand side order WR72X208.
Do-It-Yourself Stories from Customers like You
Broken left drawer slide on bottom drawer in GE refrigerator James P. • Dalton , GA • March 21, 2014
Removed drawer, removed broken slide, cleaned drawer & behind, ordered part, received next day, installed part.
The real story here though is the ease of getting the correct part. AppliancePartsPros.com was a great web site: quick model search, full diagram, picture of part superimposed on an inch grid pattern so you can confirm measurements, reasonable price & shipping, and a GE replacement part. I ordered the part around 2 pm one day and had the part in my hands by 2 pm the next day. Great...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X206
The Drawer Slide Assembly is an OEM part for GE refrigerators. It provides the mechanism that allows refrigerator drawers to slide in and out smoothly. This assembly includes the tracks and glides that support the drawer, ensuring it moves effortlessly while staying securely in place.
Causes of a bad drawer slide assembly can include wear and tear from frequent use, accumulation of dirt and debris in the tracks, or physical damage from overloading or mishandling the drawer.
Symptoms of a bad drawer slide assembly include:
- Difficulty opening or closing the drawer
- The drawer not staying in place
- Unusual noises when moving the drawer
- The drawer feeling loose or wobbly
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
With a length of 16 1/4 inches, it is structured to support the crisper drawer. This facilitates its smooth and effortless sliding in and out. For matching left-hand side order WR72X207.
Do-It-Yourself Stories from Customers like You
Broken drawer rail Gerrit R. • Mequon , WI • November 06, 2015
The fix for this 24 year old Kenmore refrigerator was simple. I ordered the drawer rail and paid for standard shipping and received the part the following day. Wow that was fast.
The replacement involved removing the contents of the shelf, remove a couple of screws, replace the guide and voila, it was done.
Read more
More