Kenmore Refrigerator 363.9542621 (3639542621, 363 9542621) Parts

Genuine Ge part

Water Line Sleeve

By: Ge

Part Number: WR2X8933

Do-It-Yourself Stories from Customers like You Clogged drain tube Keith P. • Ivoryton , CT • March 03, 2017

Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly. Read more

Genuine Ge part

Ice Dispenser Deflector

5.0 (3)

By: Ge

Part Number: WR17X2059

This replacement part is an ice dispenser deflector, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice dispenser deflectors are found inside of the ice-making assembly and are an important part of many freezers. The ice dispenser deflector allows the ice to come down from the tray into the dispensing area. A new ice dispenser deflector might be needed if the current one has become too brittle and has even cracked or broken. Be sure that the refrigerator is completely powered off before starting this repair. The user must have access to the ice maker assembly and will need common household tools like a screwdriver and pliers. The user might also need working gloves as some parts in and around the assembly have sharp edges or blades.Note that this part is sold individually. This ice dispenser deflector is sourced directly from the manufacturer and is a genuine OEM replacement part.

Do-It-Yourself Stories from Customers like You The deflector broke John J. • Lexington , TN • April 22, 2014

Replaced the deflector Read more

Genuine Ge part

Shelf

By: Ge

Part Number: WR71X10715

Genuine Ge part

Cradle Actuator

By: Ge

Part Number: WR17X3493

Genuine Ge part

Pan, Crisper Upper

By: Ge

Part Number: WR32X1221

Genuine Ge part

Gril Reces W

5.0 (1)

By: Ge

Part Number: WR17X3160

Do-It-Yourself Stories from Customers like You Dispenser auger was rusty and pitted Darrell M. • Fairfield , OH • May 23, 2015

Replaced it with a new auger. The repair video displayed on your site was a life saver. It simplified a complicated process. It resulted in a successful repair with far fewer swear words. :-) I received the parts the afternoon of second day after ordering! AppliancePartsPros.com is now my new go to source for appliance parts. Read more

Genuine Ge part

Tube/Spout

By: Ge

Part Number: WR2X7927

Genuine Ge part

Fill Cup

By: Ge

Part Number: WR29X10063

Genuine Ge part

Switch

4.5 (2)

By: Ge

Part Number: WR29X5171

Do-It-Yourself Stories from Customers like You Icemaker would not stop making ice Henry T. • Huntersville , NC • November 23, 2014

Determined from the schematic on the inside of the cover of the icemaker that the likely problem was the "stop" micro switch.... Took the whole thing apart and confirmed the switch was defective. Replaced it with a standard DPDT switch - for a temporary fix. Went on line to find replacement. Bought it from APP Parts Pros. replaced DPDT switch with micro.. all is well.... saved at least $150 by not having a repair person come to the house - felling good about this..... Read more

Genuine Ge part

Shim

5.0 (4)

By: Ge

Part Number: WR2X4540

Do-It-Yourself Stories from Customers like You Door fell off the refrigerator sure did! Linda B. • Kannapolis , NC • January 09, 2016

This is my parent's refrigerator but luckily my brother and I were both there when it happened. I found the manual and researched on the parts website to find the parts we needed. Dad, 88, wanted to call the appliance repairman but we convinced him to let us give it try. Two days later the parts arrived, my brother and sister-in-law fixed the door and Dad saved $100. He is happy and we thank you for the quick service! Read more

Genuine Ge part

Ice Auger Blade

5.0 (2)

By: Ge

Part Number: WR2X7783

This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.

Do-It-Yourself Stories from Customers like You Ice crusher repair GE Monogram counter depth. Glenn J. • El Cajon , CA • July 27, 2020

This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful. The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger). Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost). The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot. Read more

Genuine Ge part

Knob

4.8 (6)

By: Ge

Part Number: WR2X8723

Do-It-Yourself Stories from Customers like You Broken knob for ice maker Marc C. • Bristol , CT • November 04, 2016

The video was right on the money !!!!! It took me 15 minutes and with the help of the viedo i changed the control board for the front of my fridge. Just amazing !!!!! Read more

Genuine Ge part

Support Bumper

By: Ge

Part Number: WR2X8989

Genuine Ge part

Mod.Time Delay

5.0 (1)

By: Ge

Part Number: WR55X130

Do-It-Yourself Stories from Customers like You Broken ice/water dispenser on my refrigerator Robert M. • Greensboro , NC • November 25, 2020

I ended up replacing the circuit board, solenoid, and ice door. While I had it torn apart, I went ahead and replaced the rubber pieces that funnel the ice into the glass. Read more