Kenmore Refrigerator 363.9557710 (3639557710, 363 9557710) Parts

I loosened all bracket screws around door inside edge. I removed the old seal and replace it with the new seal. The most difficult part was adjusting the seal properly. This required loosening the screws two or three at a time and pulling the rubber seal outwards from under the bracket. The seal was wrinkled coming out of the cardboard package. I followed the instructions dipping the seal in hot water and this relaxed the rubber removing the kinks. Read more

I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new. Read more

When we inspected the first time we found that Plactic had broken from the spiral part that for wards the ice. Also there were cracks in two places of other parts. There was a hole in the bottom of the bin. The new spiral was assembled and two new parts were replaced with help from the video and the diagram and the unit worked well. Two months later, ice maker would not forward any ice though the bin was full. We emptied the bin sand have ordered a new part or two in hopes that they will... Read more

I removed ice maker, cleared out frozen food to make room for drill, removed broken support, & drilled out old pop rivet (covering the area below with a cloth to catch the metal shavings). Then I carefully straightened the metal support, loosely installed the new support, and pop-riveted it onto the support using the same size rivet. I reinstalled the ice maker, replaced the frozen food, and turned the ice maker back on. No issues. Read more

Jacked it up, unscrewed old roller, installed new one. Read more