Kenmore Refrigerator 363.9715709 (3639715709, 363 9715709) Parts

I removed ice maker, cleared out frozen food to make room for drill, removed broken support, & drilled out old pop rivet (covering the area below with a cloth to catch the metal shavings). Then I carefully straightened the metal support, loosely installed the new support, and pop-riveted it onto the support using the same size rivet. I reinstalled the ice maker, replaced the frozen food, and turned the ice maker back on. No issues. Read more

I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new. Read more

Purchased new slides and screws and replaced them both. Read more

New Dispenser Switch. I had problems installing new replacement switch as new switch had THREE terminals not Two as mine did. Needed new switch housing, this should have came as a kit, not two parts with same item numbers (72). Once I figured out the problem I modified the switch housing for the third terminal. MY REFRIGERATOR IS OLD AND HAS OUT LASTED NEW ONES. Read more

Determined from the schematic on the inside of the cover of the icemaker that the likely problem was the "stop" micro switch.... Took the whole thing apart and confirmed the switch was defective. Replaced it with a standard DPDT switch - for a temporary fix. Went on line to find replacement. Bought it from APP Parts Pros. replaced DPDT switch with micro.. all is well.... saved at least $150 by not having a repair person come to the house - felling good about this..... Read more

I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new. Read more

When we inspected the first time we found that Plactic had broken from the spiral part that for wards the ice. Also there were cracks in two places of other parts. There was a hole in the bottom of the bin. The new spiral was assembled and two new parts were replaced with help from the video and the diagram and the unit worked well. Two months later, ice maker would not forward any ice though the bin was full. We emptied the bin sand have ordered a new part or two in hopes that they will... Read more

I removed ice maker, cleared out frozen food to make room for drill, removed broken support, & drilled out old pop rivet (covering the area below with a cloth to catch the metal shavings). Then I carefully straightened the metal support, loosely installed the new support, and pop-riveted it onto the support using the same size rivet. I reinstalled the ice maker, replaced the frozen food, and turned the ice maker back on. No issues. Read more

GE no longer makes the shelf support available but Appliancepartspros had somewhat similar part for icemaker bucket that I could adapt. Saved the frig! Customer support was great, friendly, knowledgeable, patient, providing information about the part I needed (no longer available) and the intended use of the part I purchased. Am satisfied with the outcome but 5 stars would have been if GE still provided the missing part to suppliers (they probably didn't expect their frig to last so long!!). Read more