Kenmore Washer 417.40412701 (41740412701, 417 40412701) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134126700
$36.23
- Compare At:
-
$39.27
- You Save:
-
$3.04
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134390701
Replacement control panel for laundry center units. Installs on the front console to house controls and displays. Order if your panel is cracked or damaged.
More
$102.95
- Compare At:
-
$121.48
- You Save:
-
$18.53
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134532200
Mounting screw for laundry center units. Secures internal components and panels. Replace if stripped, missing, or damaged during disassembly or repairs.
More
$5.76
- Compare At:
-
$6.91
- You Save:
-
$1.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134779000
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134804900
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134897000
$21.35
- Compare At:
-
$21.87
- You Save:
-
$0.52
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134937700
$1.48
- Compare At:
-
$1.63
- You Save:
-
$0.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134937900
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5995529806
$4.79
- Compare At:
-
$5.27
- You Save:
-
$0.48
Out Of Stock
Usually ships within 4 - 14 days
Genuine Electrolux part
By: Electrolux
Part Number: 5304536802
Do-It-Yourself Stories from Customers like You
Leaking drain hose. Richard T. • Saint Charles , IL • November 18, 2017
Replaced drain hose and clamp.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131243700
Do-It-Yourself Stories from Customers like You
The bearing on the dryer drum wore out so bad the ball fell off Thomas J. • Green Bay , WI • October 31, 2016
I replaced the ball and socket connection for the drum. After doing so, I realized that the belt had been stretched and the tension pulley was not putting enough tension on the belt to turn the drum. After ordering a new belt, extra screw that was lost while disassembling the dryer, and some high temperature lubricant for the drum ball and socket the dryer now runs as well as it did when it was new.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137518800
Do-It-Yourself Stories from Customers like You
Wouldn't spin at first then no activity at all e23 code Levi G. • Wytheville , VA • March 06, 2017
We had a power surge that tripped the washer breaker. It showed an E23 error code so I replaced the main control board (part number AP4362398.) All washer activity back to normal except it still wouldn't spin and still had E23 code. I removed the tub to pump hose (part number AP3837322) to find all sorts of goodies inside such as underwires from bras, a quarter, nickel, penny, and dime stacked perfectly on top of each other inside the filter, and tangled yarn from a rug. Ended up replacing the...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134869400
This OEM replacement part is a drive motor for washers. The drive motor is the main engine that propels the washer tub to spin and perform its primary function of washing clothes. Over time, a drive motor can lose power or stop working altogether due to excessive wear and tear. If the washer is no longer spinning or not working as efficiently as it once did, the drive motor will need to be replaced. Thankfully, replacing this part is a relatively easy fix.To begin, start by unplugging the washer. Once unplugged, move the washer away from the wall to gain access to the back panel. Uninstall the back panel by removing the mounting screws. Once removed, gain access to the drive motor and remove the screws that attach it to the washer. After unthreading the screws, pull the drive motor out of its place and position the new motor in its original position. Fasten the mounting screws and make sure the motor is securely attached. This genuine replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore brand washers.
Do-It-Yourself Stories from Customers like You
Front load washer Marcos O. • Pasadena , TX • October 30, 2015
Unplug washer then took back panel off. Unplug wires from motor then removed four screws from the motor housing then took old motor off and replaced it with new motor
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131618500
Fix loud banging, grinding noises, or oil leaks during spin with this inner tub assembly. Includes spider and shaft. Advanced repair, 2-4 hours.
Do-It-Yourself Stories from Customers like You
The spider was completely disintegrated Molly H. • New York , NY • February 10, 2015
The biggest challenge was replacing the inner tub assembly (with spider and shaft) without full access to the top of the washer, only to the back. Due to space limitations, the matching stacking gas dryer could not be removed: it could only be elevated (using wood blocks) about 4 inches above the top of the washer. Removing the washer's hoses, motor, control panel, and rear weight, and releasing the shock absorbers, was fairly easy. But supporting the outer tub assembly, with its front-end...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134438301
Do-It-Yourself Stories from Customers like You
Not agitating or spinning James P. • Genoa , WI • January 12, 2019
Replaced pump motor and pressure switch
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131278700
Outer door panel that replaces a damaged or worn outer door surface, restoring the appliance's finished exterior and protecting inner door components. Ideal when the exterior is dented, scratched, or cosmetically damaged. What it does
- Provides the finished exterior surface for the appliance door and protects internal door components from damage.
- Restores appearance after dents, scratches, rust spots, or cracked paint.
- Re-establishes mounting surfaces and edge trim where tabs or attachment points are intact.
- Helps prevent further corrosion or moisture intrusion into the door assembly.
What's included One outer door panel. Install notes
- Disconnect power (and water, if applicable) and follow before starting; use proper PPE.
- Door removal and panel replacement often require basic hand tools; save and reuse original screws, handles, and trim unless replacements are supplied.
- Transfer any hardware, insulation, or inner-door pieces from the old door to the new panel as required.
- Large panels can be awkward—have a second person assist to avoid dropping or bending the panel.
Do-It-Yourself Stories from Customers like You
After 15 years the plastic door busted where the screws held the hinges on and leaked Joseph R. • Cerritos , CA • October 10, 2016
Purchased the door panels (both sides) and replaced them both. Not sure if spending $150 on door parts for a 15 year old washer was a great investment, but the parts worked great. Took maybe five minutes to put it all back together.
Read more
More