Kenmore Refrigerator 596.68049802 (59668049802, 596 68049802) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10436245
Replace a worn door gasket to restore an airtight seal, keep cold air in, reduce frost, and improve efficiency. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Magnetic gasket Jose R. • Sullivan City , TX • March 06, 2016
Really simple fix no tools required. Simply pulled the old out and install the new one in . Not hard at all.
Read more
More
$142.47
- Compare At:
-
$169.54
- You Save:
-
$27.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 67003900
Plastic insert that seats inside the refrigerator air damper cover to guide airflow from freezer to fresh food. Replace when cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Damper cover broke when I replaced the damper. Keith A. • Springfield , VA • November 14, 2020
The damper Cover snapped on in less then a second. Perfect fit!
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2320150
This refrigerator compressor start device supplies the initial boost to start the compressor and supports reliable operation. When it weakens or fails, you may hear clicking from the rear and experience poor cooling or a compressor that won't run. What it does:
- Sends momentary power to the compressor's start winding for dependable start-up
- Opens the start circuit once the compressor is running
- Works with the compressor's protection to prevent overheating damage
- Failure symptoms may include: warm temps or no cooling, compressor won't start, or repeated clicking/humming then shutting off
What's included:
- One start device assembly
Install notes:
- Disconnect power before servicing
- Access the compressor compartment (rear lower panel); locate the start device on the side of the compressor
- Note wire positions, pull the old device straight off the compressor pins, and seat the new device fully; reconnect wiring
- Reinstall panels and restore power; allow temperatures to stabilize
Do-It-Yourself Stories from Customers like You
Was not cooling. Cynthia C. • Groton , NY • May 17, 2021
Ordered the start device and run capacitor, got them on time and it took care of the problem!
Read more
More
$75.40
- Compare At:
-
$90.48
- You Save:
-
$15.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001279
Replace a cracked, broken, or missing dairy tray on your refrigerator door. This bin installs on the door to organize butter and small items in one spot.
Do-It-Yourself Stories from Customers like You
Butter dish cover tips were broke and couldn't apply cover Anthony C. • Shrewsbury , MA • April 04, 2015
Had the cover but needed the tray….put cover on new tray...
Read more
More
$67.95
- Compare At:
-
$81.54
- You Save:
-
$13.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67006877
Glass shelf that sits above crisper drawers to create storage space and help bins seal properly. Replace if cracked, shattered, or missing. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
Wife broke crisper glass trying to remove from refrigerator to clean bumped in sink and seem to explode John G. • Harrison , MI • August 28, 2014
Easy....contacted AppliancePartsPros.com, ordered new glass and replaced glass. No tools required.
Read more
More
$137.40
- Compare At:
-
$162.13
- You Save:
-
$24.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281196
The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly.
Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption.
Symptoms of a bad screw include:
- The refrigerator door seems misaligned or does not close properly.
- Increased effort needed to open or close the door.
- Unusual gaps around the door seal when closed.
- The door might squeak or make other noises during operation.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing a hinge and hinge cover. James H. • Killeen , TX • August 01, 2020
As soon as the parts arrived, installed them seamlessly. Thank you.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67004977
White plastic bushing that sleeves the hinge pin where your refrigerator door pivots. Replace when cracked, worn, or missing to restore smooth door swing.
Do-It-Yourself Stories from Customers like You
The refrigerator door not closing property. John M. • Ronkonkoma , NY • July 27, 2021
Purchased new hinge bushing, door closer, and hinge pin.
Read more
More
$11.95
- Compare At:
-
$13.27
- You Save:
-
$1.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98165
This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.
- Fastens covers, trims, brackets, and internal parts to the cabinet/frame
- Used wherever a #8-18 x 5/8 screw is specified
- Replace if the original is missing, corroded, stripped, or will not tighten
- Symptoms: loose or rattling panels, gaps, or hardware that backs out
What's included: 1 screw (#8-18 x 5/8 in.) Installation notes:
- Disconnect power; shut off gas/water before servicing
- Match thread and length; start by hand to avoid cross-threading
- Use the correct driver bit and tighten snugly—do not overtighten
- Inspect and replace damaged clips or tabs before securing
Do-It-Yourself Stories from Customers like You
Missing parts Barry E. • Long Beach , WA • July 20, 2019
Replace
Read more
More
$7.48
- Compare At:
-
$8.83
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 67006901
Factory-style replacement screw for securing appliance components. Restores a tight, rattle-free fit for brackets, panels, trims, or covers when the original hardware is missing, stripped, or corroded, helping keep assemblies aligned and secure.
- Fastens components to keep panels, brackets, and trim firmly in place
- Replaces missing, stripped, or rusted hardware that can cause looseness or rattling
- Helps restore proper alignment of parts that won't stay secured
- Useful after service when original fasteners are damaged or lost
What's included: 1 screw Install notes:
- Disconnect power before servicing; shut off water supply if applicable
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten to prevent stripping or cracking adjoining parts
Do-It-Yourself Stories from Customers like You
Handle on freezer drawer of refrigerator/freezer came off due to stripped screw Douglas M. • Westland , MI • April 08, 2021
Ordered handle, screw and handle mount. Received within a few days. Installed and everything worked perfectly. To quote "easy peasy". Action took less than 1/2 hour.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.95
- Compare At:
-
$21.36
- You Save:
-
$3.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12566606ED
Mounts at the upper corner of the cabinet to support and pivot the refrigerator door. Replace if bent, cracked, or missing to restore door alignment.
Do-It-Yourself Stories from Customers like You
A refrigerator door would not seal it had been blown off in a wind storm William H. • Sierra Vista , AZ • December 17, 2014
A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent...
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143759
Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.
Do-It-Yourself Stories from Customers like You
Failed to cool due to hole/s in evaporator leaking freon Gerald L. • Myrtle Beach , SC • August 17, 2017
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly.
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003924
Freezer running too warm or too cold? This thermistor cover shields the temperature sensor for accurate cooling. Simple snap-in installation fixes misreads.
Do-It-Yourself Stories from Customers like You
Broken icemaker Gene C. • Maricopa , AZ • November 14, 2015
I am not a plumber, but very good with anything mechanical. I uninstalled the broken icemaker, swapped the wiring and ice bar from the old icemaker to the new one, and installed the new icemaker all in 12 minutes and 37 seconds from start to finish, which includes pulling out the two freezer baskets and pulling off the freezer door. This repair could not have been any simpler. Great product!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489349
This hex washer-head screw secures panels, brackets, and other components inside your appliance. Replacing a worn, stripped, or missing screw restores a tight fit, reduces vibration and rattles, and helps keep assemblies properly aligned.
- Fastens panels, brackets, covers, and internal hardware to the cabinet or frame
- Helps prevent loosening, rattling, or misalignment during appliance operation
- Replace if the head is rounded, threads are stripped, or the screw is missing
- Useful after service when an original fastener is lost or damaged
What's included: 1 screw Install notes:
- Disconnect power and shut off gas/water before starting
- Use the correct nut driver or socket for the hex head to avoid rounding
- Start threads by hand to prevent cross-threading; tighten snugly without overtightening
Do-It-Yourself Stories from Customers like You
A refrigerator door would not seal it had been blown off in a wind storm William H. • Sierra Vista , AZ • December 17, 2014
A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent...
Read more
More
$7.48
- Compare At:
-
$8.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: W11284721
Replaces cracked or broken refrigerator light covers. Protects bulb and shields components from moisture. Slides into place with mounting tabs. Verify fit.
Do-It-Yourself Stories from Customers like You
Broken light cover Thomas C. • New Milford , CT • March 11, 2016
Replaced the cover
Read more
More
$53.21
- Compare At:
-
$63.32
- You Save:
-
$10.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67005149
Rear roller that helps move your refrigerator smoothly. Replace if broken, cracked, or wobbling to restore easy mobility. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
Broken front cabinet roller. Don K. • South Jordan , UT • August 27, 2017
Removed all the food from the freezer and most from the fridge before starting. Tipped fridge back until I could place a 2 x 4 a couple of inches behind the front rollers. With the front of the fridge now approximately 3 to 4" off the ground you can remove the adjusting bolt and the roller assembly can be pulled out of the brackets. Slide out of the notches where that hold it into the bracket. Same to install.
Read more
More
$23.61
- Compare At:
-
$28.10
- You Save:
-
$4.49