Kenmore Refrigerator 596.79242011 (59679242011, 596 79242011) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001279
Replace a cracked, broken, or missing dairy tray on your refrigerator door. This bin installs on the door to organize butter and small items in one spot.
Do-It-Yourself Stories from Customers like You
Butter dish cover tips were broke and couldn't apply cover Anthony C. • Shrewsbury , MA • April 04, 2015
Had the cover but needed the tray….put cover on new tray...
Read more
More
$67.95
- Compare At:
-
$81.54
- You Save:
-
$13.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP13005704B
Pivoting lever inside the dispenser that supports the ice chute extension. Replace if broken, cracked, or worn to restore smooth dispenser operation.
Do-It-Yourself Stories from Customers like You
Ice/water dispenser quit working when pad was pressed turns out my 2 year old son pulled the dispenser pad forward and caused the parts to warp out of place Jared T. • Johnson City , TN • April 02, 2019
Repairman said I'd need to replace the entire chute inside at a cost of nearly $400! Ordered the chute myself for a little over $100. Took me about a half an hour to carefully disassemble the water/ice dispenser and replace with the new one. The job wasn't hard, I'm just not a very "handy" guy but I love a good challenge and am very careful not to pull and pry on things which may break. It was literally only 4 screws that had to be removed and some wiring harnesses holding everything together....
Read more
More
$142.69
- Compare At:
-
$170.67
- You Save:
-
$27.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12227303WD
Support brace that stabilizes the crisper drawer shelf in your refrigerator's fresh food section. Replace if cracked, broken, or missing to keep drawers aligned.
Do-It-Yourself Stories from Customers like You
Crisper shelf frame was broken. Stevan G. • Union City , CA • December 17, 2017
Replaced broken frame and installed a new brace-cri.
Read more
More
$61.56
- Compare At:
-
$72.64
- You Save:
-
$11.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP13005706
Ice or water won't dispense? This chute extension yoke links the actuator to the ice door, fixing dispenser failures. Easy DIY repair in under an hour.
Do-It-Yourself Stories from Customers like You
Water and ice dispenser Mike P. • San Clemente , CA • August 30, 2021
Chatted and got the right part and replaced. Without the chat I would have ordered the wrong part probably. She was great.
Read more
More
$142.95
- Compare At:
-
$171.06
- You Save:
-
$28.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281196
The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly.
Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption.
Symptoms of a bad screw include:
- The refrigerator door seems misaligned or does not close properly.
- Increased effort needed to open or close the door.
- Unusual gaps around the door seal when closed.
- The door might squeak or make other noises during operation.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing a hinge and hinge cover. James H. • Killeen , TX • August 01, 2020
As soon as the parts arrived, installed them seamlessly. Thank you.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10534161
Front grille covers the lower front of your refrigerator, providing a finished look and guiding airflow. Replace if cracked, broken, or missing tabs.
Do-It-Yourself Stories from Customers like You
Crisper glass and toe plate Mary C. • Green River , WY • December 05, 2014
Very easy.Just set right in
Read more
More
$68.95
- Compare At:
-
$82.74
- You Save:
-
$13.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98165
This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.
- Fastens covers, trims, brackets, and internal parts to the cabinet/frame
- Used wherever a #8-18 x 5/8 screw is specified
- Replace if the original is missing, corroded, stripped, or will not tighten
- Symptoms: loose or rattling panels, gaps, or hardware that backs out
What's included: 1 screw (#8-18 x 5/8 in.) Installation notes:
- Disconnect power; shut off gas/water before servicing
- Match thread and length; start by hand to avoid cross-threading
- Use the correct driver bit and tighten snugly—do not overtighten
- Inspect and replace damaged clips or tabs before securing
Do-It-Yourself Stories from Customers like You
Missing parts Barry E. • Long Beach , WA • July 20, 2019
Replace
Read more
More
$7.48
- Compare At:
-
$8.83
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.95
- Compare At:
-
$21.36
- You Save:
-
$3.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001719
Supports and guides the deli drawer in your refrigerator's fresh food section. Replace if worn, broken, or causing drawer sticking, sagging, or derailment.
Do-It-Yourself Stories from Customers like You
Had two missing parts & two broken parts Kevin M. • Clovis , NM • August 14, 2025
Watched the repair videos on appliances parts pro & followed the video instructions.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11311945
This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.
- Secures parts such as panels, brackets, covers, or internal assemblies
- Restores alignment and helps eliminate vibration or rattling from loose hardware
- Replaces lost, rusted, or damaged screws during service
- Maintains safe, stable operation by keeping components tight
What's included: 1 screw Install notes:
- Disconnect power before service; if applicable, also shut off water and/or gas
- Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
- Use the correct driver bit to prevent stripping the head
Do-It-Yourself Stories from Customers like You
Left door on refrigerator would not close without using two hands Elizabeth V. • Portland , OR • July 27, 2016
Ordered two parts & easily installed them .. All fixed & I'm a 70 yr old grandma. ??
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143759
Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.
Do-It-Yourself Stories from Customers like You
Failed to cool due to hole/s in evaporator leaking freon Gerald L. • Myrtle Beach , SC • August 17, 2017
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly.
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003924
Freezer running too warm or too cold? This thermistor cover shields the temperature sensor for accurate cooling. Simple snap-in installation fixes misreads.
Do-It-Yourself Stories from Customers like You
Water on the floor and ice tray was a mess. Edward S. • Oakmont , PA • June 14, 2021
Took things apart after watching the videos and saw the ice maker was functional but all corroded or dirty with stuff from water and in watching the video realized the water on the floor was unrelated to the ice maker.
I bought the parts to make the repair. Two comments to the videos, the one for the icemaker should show how to get the top basket out of the freezer. I found another video that showed how to do that and was much easier to get to the ice maker and to remove the back panel. ...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489349
This hex washer-head screw secures panels, brackets, and other components inside your appliance. Replacing a worn, stripped, or missing screw restores a tight fit, reduces vibration and rattles, and helps keep assemblies properly aligned.
- Fastens panels, brackets, covers, and internal hardware to the cabinet or frame
- Helps prevent loosening, rattling, or misalignment during appliance operation
- Replace if the head is rounded, threads are stripped, or the screw is missing
- Useful after service when an original fastener is lost or damaged
What's included: 1 screw Install notes:
- Disconnect power and shut off gas/water before starting
- Use the correct nut driver or socket for the hex head to avoid rounding
- Start threads by hand to prevent cross-threading; tighten snugly without overtightening
Do-It-Yourself Stories from Customers like You
A refrigerator door would not seal it had been blown off in a wind storm William H. • Sierra Vista , AZ • December 17, 2014
A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent...
Read more
More
$7.48
- Compare At:
-
$8.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67005149
Rear roller that helps move your refrigerator smoothly. Replace if broken, cracked, or wobbling to restore easy mobility. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
Broken front cabinet roller. Don K. • South Jordan , UT • August 27, 2017
Removed all the food from the freezer and most from the fridge before starting. Tipped fridge back until I could place a 2 x 4 a couple of inches behind the front rollers. With the front of the fridge now approximately 3 to 4" off the ground you can remove the adjusting bolt and the roller assembly can be pulled out of the brackets. Slide out of the notches where that hold it into the bracket. Same to install.
Read more
More
$23.61
- Compare At:
-
$28.10
- You Save:
-
$4.49
Genuine Whirlpool part
By: Whirlpool
Part Number: W11434460
The Housing is an OEM part for Whirlpool refrigerators. The housing provides a secure enclosure for the door switch and light bulb. The door switch is responsible for detecting when the refrigerator door is opened or closed, allowing the light bulb to turn on and off accordingly. The light bulb illuminates the refrigerator's interior, making it easy to locate and retrieve items.
A bad housing can occur due to wear and tear, electrical malfunctions, or physical damage. If you notice symptoms such as the light not turning on when the door is opened, difficulty in replacing the light bulb, or a faulty door switch, it may be time to replace this part.
Symptoms of a bad housing include:
- Light not turning on when the door is opened
- Difficulty in replacing the light bulb
- Cracks or damage to the housing
Restore your Whirlpool refrigerator by replacing the worn or damaged housing with this genuine OEM part.
This OEM part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11551552
Routes water between internal components in your refrigerator. Replace if tube is cracked, brittle, kinked, or leaking to restore proper water flow.
Do-It-Yourself Stories from Customers like You
Maytag French door fridge leaking water from freezer and spraying water from supply line to ice maker. Eric H. • Centralia , IL • January 01, 2021
Replaced water line to ice maker and installed redesigned p trap drain.
I watched the installation videos and my wife and I easily completed this project.
One thing that I want to add for others. When the ice maker supply was leaking, it filled the funnel in the ice maker with an ice block. I had to remove the ice maker(which is pretty easy) and defrost the ice block before reinstalling the supply line. If I had not, the water would have poured into the ice bin.
Read more
More
$16.95
- Compare At:
-
$20.17
- You Save:
-
$3.22