Kenmore Refrigerator 596.79249010 (59679249010, 596 79249010) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11703060
Limits refrigerator door travel to prevent overextension and cabinet damage. Replace if cracked, broken, or worn to restore controlled door movement.
Do-It-Yourself Stories from Customers like You
Door would not close completely. The door closure had slight wear and one of the round holes in the door stop was deformed and oval shaped Steve C. • Seneca , SC • July 23, 2018
Replaced door closure and door stop.
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001279
Replace a cracked, broken, or missing dairy tray on your refrigerator door. This bin installs on the door to organize butter and small items in one spot.
Do-It-Yourself Stories from Customers like You
Butter dish cover tips were broke and couldn't apply cover Anthony C. • Shrewsbury , MA • April 04, 2015
Had the cover but needed the tray….put cover on new tray...
Read more
More
$67.95
- Compare At:
-
$81.54
- You Save:
-
$13.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP13005704B
Pivoting lever inside the dispenser that supports the ice chute extension. Replace if broken, cracked, or worn to restore smooth dispenser operation.
Do-It-Yourself Stories from Customers like You
Ice/water dispenser quit working when pad was pressed turns out my 2 year old son pulled the dispenser pad forward and caused the parts to warp out of place Jared T. • Johnson City , TN • April 02, 2019
Repairman said I'd need to replace the entire chute inside at a cost of nearly $400! Ordered the chute myself for a little over $100. Took me about a half an hour to carefully disassemble the water/ice dispenser and replace with the new one. The job wasn't hard, I'm just not a very "handy" guy but I love a good challenge and am very careful not to pull and pry on things which may break. It was literally only 4 screws that had to be removed and some wiring harnesses holding everything together....
Read more
More
$142.69
- Compare At:
-
$170.67
- You Save:
-
$27.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12227303WD
Support brace that stabilizes the crisper drawer shelf in your refrigerator's fresh food section. Replace if cracked, broken, or missing to keep drawers aligned.
Do-It-Yourself Stories from Customers like You
Repair/replace Michael D. • Palm Coast , FL • November 26, 2024
Repaired
Read more
More
$61.56
- Compare At:
-
$72.64
- You Save:
-
$11.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP13005706
Ice or water won't dispense? This chute extension yoke links the actuator to the ice door, fixing dispenser failures. Easy DIY repair in under an hour.
Do-It-Yourself Stories from Customers like You
My dispenser pad broken along with the slot that the pad connected to the chute Binh N. • Garden Grove , CA • April 16, 2021
So I ordered a new chute with a pad and it came in three days which was earlier than I expected. Replaced it and it works. It was an easy fix and I'm happy with my purchase.
Read more
More
$142.95
- Compare At:
-
$171.06
- You Save:
-
$28.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281196
The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly.
Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption.
Symptoms of a bad screw include:
- The refrigerator door seems misaligned or does not close properly.
- Increased effort needed to open or close the door.
- Unusual gaps around the door seal when closed.
- The door might squeak or make other noises during operation.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing a hinge and hinge cover. James H. • Killeen , TX • August 01, 2020
As soon as the parts arrived, installed them seamlessly. Thank you.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10534161
Front grille covers the lower front of your refrigerator, providing a finished look and guiding airflow. Replace if cracked, broken, or missing tabs.
Do-It-Yourself Stories from Customers like You
Crisper glass and toe plate Mary C. • Green River , WY • December 05, 2014
Very easy.Just set right in
Read more
More
$68.95
- Compare At:
-
$82.74
- You Save:
-
$13.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98165
This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.
- Fastens covers, trims, brackets, and internal parts to the cabinet/frame
- Used wherever a #8-18 x 5/8 screw is specified
- Replace if the original is missing, corroded, stripped, or will not tighten
- Symptoms: loose or rattling panels, gaps, or hardware that backs out
What's included: 1 screw (#8-18 x 5/8 in.) Installation notes:
- Disconnect power; shut off gas/water before servicing
- Match thread and length; start by hand to avoid cross-threading
- Use the correct driver bit and tighten snugly—do not overtighten
- Inspect and replace damaged clips or tabs before securing
Do-It-Yourself Stories from Customers like You
Missing parts Barry E. • Long Beach , WA • July 20, 2019
Replace
Read more
More
$7.48
- Compare At:
-
$8.83
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.95
- Compare At:
-
$21.36
- You Save:
-
$3.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001719
Supports and guides the deli drawer in your refrigerator's fresh food section. Replace if worn, broken, or causing drawer sticking, sagging, or derailment.
Do-It-Yourself Stories from Customers like You
Had two missing parts & two broken parts Kevin M. • Clovis , NM • August 14, 2025
Watched the repair videos on appliances parts pro & followed the video instructions.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11311945
This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.
- Secures parts such as panels, brackets, covers, or internal assemblies
- Restores alignment and helps eliminate vibration or rattling from loose hardware
- Replaces lost, rusted, or damaged screws during service
- Maintains safe, stable operation by keeping components tight
What's included: 1 screw Install notes:
- Disconnect power before service; if applicable, also shut off water and/or gas
- Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
- Use the correct driver bit to prevent stripping the head
Do-It-Yourself Stories from Customers like You
Left door on refrigerator would not close without using two hands Elizabeth V. • Portland , OR • July 27, 2016
Ordered two parts & easily installed them .. All fixed & I'm a 70 yr old grandma. ??
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143759
Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.
Do-It-Yourself Stories from Customers like You
Failed to cool due to hole/s in evaporator leaking freon Gerald L. • Myrtle Beach , SC • August 17, 2017
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly.
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003924
Freezer running too warm or too cold? This thermistor cover shields the temperature sensor for accurate cooling. Simple snap-in installation fixes misreads.
Do-It-Yourself Stories from Customers like You
Fridge warm freezer cold failed defrost thermostat Linh V. • Galloway , NJ • August 15, 2016
Initially purchased an evap fan motor, as it was listed as the most common failed component. Of course, once I pulled the cover out of the freezer, the fan motor was just fine, but the coils were a block of ice. So far, it looks like the thermostat was the source of the issue. For anyone experiencing the warm fridge, cold freezer, I recommend pulling the cover off and taking a look before ordering any parts. The video was spot on for the Amana ABB2522FEW fridge and made the repair a piece of...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489349
This hex washer-head screw secures panels, brackets, and other components inside your appliance. Replacing a worn, stripped, or missing screw restores a tight fit, reduces vibration and rattles, and helps keep assemblies properly aligned.
- Fastens panels, brackets, covers, and internal hardware to the cabinet or frame
- Helps prevent loosening, rattling, or misalignment during appliance operation
- Replace if the head is rounded, threads are stripped, or the screw is missing
- Useful after service when an original fastener is lost or damaged
What's included: 1 screw Install notes:
- Disconnect power and shut off gas/water before starting
- Use the correct nut driver or socket for the hex head to avoid rounding
- Start threads by hand to prevent cross-threading; tighten snugly without overtightening
Do-It-Yourself Stories from Customers like You
A refrigerator door would not seal it had been blown off in a wind storm William H. • Sierra Vista , AZ • December 17, 2014
A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent...
Read more
More
$7.48
- Compare At:
-
$8.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67005149
Rear roller that helps move your refrigerator smoothly. Replace if broken, cracked, or wobbling to restore easy mobility. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
Broken front cabinet roller. Don K. • South Jordan , UT • August 27, 2017
Removed all the food from the freezer and most from the fridge before starting. Tipped fridge back until I could place a 2 x 4 a couple of inches behind the front rollers. With the front of the fridge now approximately 3 to 4" off the ground you can remove the adjusting bolt and the roller assembly can be pulled out of the brackets. Slide out of the notches where that hold it into the bracket. Same to install.
Read more
More
$23.61
- Compare At:
-
$28.10
- You Save:
-
$4.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400805
This factory fastener secures appliance panels, brackets, and internal components so everything stays aligned and quiet. Replacing a missing or damaged screw restores a tight fit and helps reduce vibration, rattles, and wear.
- Fastens metal or plastic parts to the cabinet/frame
- Maintains alignment of covers, ducts, housings, and brackets
- Replace if the head is stripped, threads are worn, or hardware is missing
- Symptoms can include loose or misaligned panels, rattling/vibration noises, or parts that won't stay secured
What's included: One screw. Install notes:
- Disconnect power and shut off gas/water before service.
- Match the screw to the original location and reuse existing holes/mounts.
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening.
- Use the correct driver bit to prevent stripping the head.
Do-It-Yourself Stories from Customers like You
Broken oven door handle Kari M. • Greensburg , IN • December 10, 2021
The plastic piece on the handle where the screw goes in to hold glass door up had broke. I ordered new handle, the retainer pieces that go over the plastic pieces to lock it all in and screws that were suggested. The screws were the wrong ones. They were way too small. I already had one screw and thankfully only had to buy 1 new one because the screw was $40 and shipping’s $10 for it AND it’s on back order right now. The old retainer ring that goes over plastic piece was a nightmare to remove...
Read more
More
$7.43
- Compare At:
-
$8.83
- You Save:
-
$1.40