Kenmore Refrigerator 596.79519012 (59679519012, 596 79519012) Parts

This slide temperature control is the user-access interface that moves the thermostat connection to select dryer heat levels. It restores responsive, indexed temperature selection for standard slide-style dryer controls. What it does

• Moves the internal contact to select low/medium/high heat settings for the dryer
• Replaces worn or loose slider that causes inconsistent or stuck temperature selection
• Helps correct symptoms such as inability to change heat level, intermittent temperature changes, or a slider that feels loose or won't stay in position
• Works as the mechanical interface between the console knob/lever and the dryer's control assembly

• One slide temperature control (single slider assembly)

• High-level replacement for users comfortable removing control consoles; disconnect power before service
• Handle control panel clips and trim carefully to avoid cracking plastic bezels
• Verify proper seating and alignment of the slider on the control shaft before reassembly

This O-ring seal provides a watertight seal for the appliance's water path, helping prevent leaks and maintain proper operation. Use this exact replacement when the original ring is cracked, flattened, or worn. What it does:

• Creates a pressure-tight seal at a water connection to stop drips and leaks
• Keeps water contained inside hoses, valves or pump fittings
• Restores proper sealing when the original O-ring becomes brittle or deformed
• Helps prevent water damage to cabinetry and flooring from appliance leaks

• One O-ring seal

• Turn off power and water supply before beginning any repair
• Remove the old O-ring and clean mating surfaces of debris and buildup
• Inspect the groove or fitting for damage; replace the part if the mating surface is scored
• If needed, use a small amount of manufacturer-recommended lubricant to ease installation and protect the O-ring

This cradle supports and secures the freezer basket inside the compartment, keeping the basket properly aligned for smooth sliding and storage. Fits the OEM mounting locations and restores original basket support. What it does:

• Holds the freezer basket in the correct position to prevent sagging or misalignment
• Provides a stable mounting point so the basket slides smoothly
• Replaces cracked, broken, or missing bracketry that can cause rattling or uneven basket movement
• Helps restore proper function after impact or wear to the basket support

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove the freezer basket and any obstructions to access the mounting area
• Typically secures with existing screws/clips; retain original fasteners when possible

This freezer basket cradle bracket supports and secures the freezer basket so it slides and rests correctly in the freezer compartment. Replaces a worn or broken cradle to restore proper basket alignment and support. What it does

• Holds the freezer basket in the correct position so the basket slides smoothly on its track
• Keeps the basket from tipping or sagging when loaded
• Prevents the basket from coming loose or falling out of the compartment
• Reduces noise and binding caused by a damaged or missing cradle

• One freezer basket cradle bracket

• Disconnect power to the refrigerator before starting any repair
• Access the cradle by removing the freezer basket and any obstructing panels or shelves
• Fasten with the existing screws or clips; the basket slides smoothly after installation
• Wear gloves and eye protection; for model-specific instructions

This is a genuine mounting screw used to secure appliance panels and components. It provides reliable fastening to keep parts aligned and reduce vibration-related noise for safer, quieter operation. What it does:

• Secures panels, brackets, or small components to the appliance frame
• Prevents parts from loosening and causing rattling or misalignment
• Maintains proper part positioning for reliable operation
• Helps reduce vibration and noise when panels are fastened correctly

• Use the correct driver and size to avoid stripping the head
• Tighten until snug; do not overtighten which can strip threads or crack plastic
• Disconnect power before servicing electrical appliances to avoid shock
• If a screw is corroded or damaged, replace all similar fasteners in that area for best results

This control wire harness connects the refrigerator control board to internal components, restoring proper signal and power routing so controls and functions communicate correctly. Designed as a direct-fit replacement for the OEM harness. What it does

• Transmits power and control signals between the main control board and appliance components.
• Replaces a damaged or chafed harness that can cause intermittent or no response from controls.
• Can resolve symptoms such as unresponsive control panel, inconsistent cooling, or certain components not operating.
• Routes connectors to match OEM locations for reliable, vibration-resistant connections.

• One control wire harness as shown

• Disconnect power before starting any repair to avoid shock or damage.
• Inspect connector ends and routing; replace only if the existing harness matches the replacement.
• Handle connectors by the plug housings—do not pull on wires. Re-seat each connector fully until it clicks.
• Some dashboard or interior panels may need removal; keep screws and fasteners organized for reassembly.

This OEM grease is a purpose-made appliance lubricant that reduces friction and protects moving parts for smoother operation and longer component life. Use where specified by the manufacturer for bearings, slides, or motor shafts. What it does:

• Lubricates gears, bearings, rollers and shafts to reduce wear and noise
• Helps prevent binding, seizing, and grinding on moving components
• Protects metal parts from corrosion where grease is specified
• Keeps parts moving smoothly under normal operating temperatures

• Disconnect power before servicing any appliance; follow manufacturer service instructions
• Apply sparingly to clean, dry surfaces; avoid over-greasing which can attract debris
• Wear gloves and wipe excess grease from surrounding areas to prevent staining

This wire harness connects the appliance's control assembly to key components so signals and power reach the control board reliably. It replaces a damaged or faulty harness to restore proper electrical connections and control function. What it does:

• Transfers power and control signals between the main control and connected components
• Helps resolve intermittent control operation, non-responsive buttons, or failed cycles when caused by wiring problems
• Prevents shorts or open circuits that can result from frayed or broken wires
• Matches OEM connector layout to ensure correct fit and reliable electrical contact

• Disconnect power (unplug or shut off breaker) before accessing internal wiring
• Inspect mating connectors and control board terminals for damage before installation

This freezer light module housing secures and positions the freezer lamp assembly so the interior light stays protected and correctly aimed. It replaces a worn, cracked, or broken housing to restore proper lighting and fit. What it does:

• Holds the freezer light bulb and socket in place so the lamp illuminates the compartment
• Protects the lamp from moisture and physical damage
• Helps maintain correct light orientation for even interior lighting
• Commonly replaced when the housing cracks, breaks, or no longer secures the bulb

• Disconnect power (unplug or switch off breaker) before servicing the appliance.
• Handle the lamp/socket carefully; avoid forcing clips or tabs during removal and installation.
• If replacing the bulb or socket, verify correct bulb type separately—this listing is for the housing only.

Sealer for refrigerant line insulation.

This front pan is the exterior cabinet panel that forms the appliance's front surface, restoring appearance and protecting internal components from dust and debris. It provides a stable mounting surface for the door and control openings. What it does

• Replaces a dented, cracked or rusted front panel to restore the appliance's exterior and fit.
• Protects internal parts from dust, lint and moisture that can enter through a damaged front.
• Helps maintain proper door alignment and sealing when the original front is warped or bent.
• Restores mounting points used for the door, trim and control openings.

• One front pan

• Disconnect power (and water supply if applicable) before starting work.
• Basic hand tools required; installation typically involves removing the door, trim and associated fasteners.
• Keep original screws and brackets if they are undamaged; replace any stripped hardware.

This self-drilling screw secures appliance panels and components where a fastener must cut its own pilot hole. It provides a quick, reliable hold for repair or reassembly of trim, brackets, and internal fixtures. What it does:

• Fastens panels, brackets, and small components without pre-drilling
• Helps stop loose or rattling trim and parts caused by missing or worn screws
• Restores proper alignment and secure mounting after repairs
• Works where sheet metal or thin substrates require self-tapping engagement

• One self-drilling screw

• Disconnect power and follow appliance safety procedures before starting repairs
• Use the correct size driver and steady pressure to avoid stripping the head
• Start straight and apply firm, even torque; avoid overtightening which can damage mounting surfaces
• Wear eye protection and handle small fasteners carefully to avoid loss or ingestion hazards

Size: 63-1/2 x 35-1/2 x 2-5/8 inch.

Size: 3/16 inch.

Size: 5/16 inch.