Kenmore Range 665.75012103 (66575012103, 665 75012103) Parts

This orifice is the small gas-port insert that meters natural gas to a stove or range burner so the flame burns correctly. It replaces a worn or damaged spud to restore proper burner ignition and heat control. What it does:

• Regulates natural gas flow to a specific burner for proper combustion
• Helps maintain a steady, even flame and consistent cooking temperatures
• Can resolve weak or uneven flames, burner that won't light cleanly, or flame instability
• Used where a specific size spud/orifice is required for natural gas operation

• Turn off gas supply and unplug the appliance before servicing
• Remove burner head and cap to access and replace the orifice; use hand tools and avoid overtightening
• Verify this orifice matches the required size for the burner and your gas type

This burner baffle sits under the cooktop burner to direct heat and protect surrounding components, helping maintain even flame distribution and preventing debris from falling into the burner area. What it does:

• Shields the area under the burner from spills, grease and food debris.
• Helps route heat and combustion gases away from sensitive components.
• Supports stable burner operation and consistent heating performance.
• Commonly replaced when warped, corroded or damaged by spills.

• Turn off gas and power to the appliance before servicing; follow all safety precautions.
• Remove burner grates and caps to access the baffle; use basic hand tools.
• Inspect surrounding components (burner head, igniter) while the baffle is removed.

This orifice spud directs gas flow to a burner for correct flame performance, restoring safe, consistent ignition and heat. It's a direct-replacement component used where the factory orifice has become damaged or worn. What it does:

• Controls the gas flow to a specific burner for proper flame size and combustion
• Helps restore consistent ignition and even heating when a burner burns low or unevenly
• Can stop symptoms like weak or unstable flames and uneven cooking
• Does not alter appliance settings—matches OEM flow characteristics when installed

• Turn off the gas supply and power to the appliance before starting any work
• Use appropriate tools and thread sealant rated for gas joints if required by the manufacturer
• After installation, check all connections for leaks with a soap solution or approved leak detector
• Gas-system repairs are safety-sensitive; perform the replacement

This spud orifice regulates the flow of natural gas to a burner, helping maintain the correct flame size for safe, efficient cooking. It replaces worn or damaged orifices to restore reliable ignition and burner performance. What it does:

• Meters natural gas to the burner to produce the proper flame for cooking
• Helps maintain consistent heat output and stable ignition
• Commonly replaced when flames are weak, uneven, yellow-tipped, or the burner won't light reliably
• Compatible with factory burner assemblies that use a spud-style orifice

• Turn off gas supply and unplug the appliance before servicing
• Use appropriate tools; avoid overtightening the orifice when installing
• After installation, check for gas leaks and proper burner operation before regular use

Rubber bumper. Color: Grey.

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and reducing movement. It's a direct-fit structural support used where panels or assemblies need a stable attachment point. What it does:

• Secures panels, trim or internal assemblies to the appliance cabinet to prevent shifting or sagging
• Restores proper alignment to reduce vibration, rattling or scraping noises
• Helps maintain door and panel fit for correct operation and appearance
• Used when a broken, bent or missing bracket causes loose or misaligned parts

• Disconnect power and water before starting any repair
• Verify bracket orientation and location against the appliance before tightening
• Use original mounting hardware when possible; inspect screws or clips and replace if worn

This is a threaded machine screw used to fasten appliance panels and components. It restores secure attachment points so panels, brackets, and assemblies stay firmly mounted and reduce rattling or misalignment. What it does

• Secures panels, brackets, or small components to the appliance chassis
• Restores loose or missing fasteners that cause vibration, rattling, or unsecured parts
• Provides the correct thread engagement to prevent stripped holes when installed properly
• Works wherever an 8-18 threaded screw is specified by the manufacturer

• Disconnect power to the appliance before beginning any repair.
• Use the correct screwdriver or nutdriver to avoid stripping the head.
• Do not overtighten; snug until secure to prevent damage to threads or panels.
• Follow manufacturer service instructions for safe disassembly.

Color: White.

A partial oven rack that restores a secure, space-saving shelf inside your oven so pans and bakeware sit level and slide smoothly. Replaces bent, warped, or missing partial racks to improve cooking stability and access. What it does:

• Provides a stable support surface for smaller cookware and bakeware
• Replaces warped or damaged partial racks that no longer sit level
• Restores smooth sliding action on oven rack supports
• Helps prevent cookware from tipping or sliding during use

• One partial oven rack

• Ensure the oven is completely cool and disconnected from power before handling
• Slide the rack into the oven's existing side supports until fully seated
• Wear gloves to avoid sharp edges; inspect rack supports for damage before use
• No special tools required; verify correct orientation so the rack sits level