Kenmore Range 665.95179300 (66595179300, 665 95179300) Parts

This is a threaded machine screw used to fasten appliance panels and components. It restores secure attachment points so panels, brackets, and assemblies stay firmly mounted and reduce rattling or misalignment. What it does

• Secures panels, brackets, or small components to the appliance chassis
• Restores loose or missing fasteners that cause vibration, rattling, or unsecured parts
• Provides the correct thread engagement to prevent stripped holes when installed properly
• Works wherever an 8-18 threaded screw is specified by the manufacturer

• Disconnect power to the appliance before beginning any repair.
• Use the correct screwdriver or nutdriver to avoid stripping the head.
• Do not overtighten; snug until secure to prevent damage to threads or panels.
• Follow manufacturer service instructions for safe disassembly.

This oven insulation retainer holds the insulation beneath the oven cavity to help maintain proper heat shielding and support. It replaces damaged or missing retainers to restore correct insulation positioning and reduce heat transfer to surrounding components. What it does:

• Secures oven cavity insulation in place so insulation can't shift or sag
• Helps maintain proper heat shielding around the oven cavity
• Commonly replaced when the retainer is cracked, broken, or missing

• Intended for use with the oven insulation area; fits your model before installing
• Turn off power to the appliance at the breaker before servicing to avoid shock hazard
• Handle gently to avoid damaging surrounding insulation; wear gloves and eye protection
• Use existing mounting hardware when possible; replace any stripped or damaged fasteners

A partial oven rack that restores a secure, space-saving shelf inside your oven so pans and bakeware sit level and slide smoothly. Replaces bent, warped, or missing partial racks to improve cooking stability and access. What it does:

• Provides a stable support surface for smaller cookware and bakeware
• Replaces warped or damaged partial racks that no longer sit level
• Restores smooth sliding action on oven rack supports
• Helps prevent cookware from tipping or sliding during use

• One partial oven rack

• Ensure the oven is completely cool and disconnected from power before handling
• Slide the rack into the oven's existing side supports until fully seated
• Wear gloves to avoid sharp edges; inspect rack supports for damage before use
• No special tools required; verify correct orientation so the rack sits level

Kit includes 4 pins.

This oven flange seal creates a tight weatherstrip between the oven door and cabinet to help keep heat and moisture inside the cooking cavity for more consistent baking and reduced heat loss around the door. What it does:

• Seals the gap between the oven door and the oven frame to help maintain internal temperature.
• Reduces heat and smoke escaping from the oven during use.
• Helps prevent spills and crumbs from entering the flange area.
• Common symptom indicators: visible gaps, torn or brittle seal, heat felt at the door edge, or uneven cooking.

• Disconnect power (unplug or shut off circuit breaker) before servicing the appliance.
• Inspect the door and flange channel for debris or damage; clean before installing the new seal.
• Press the seal evenly into the retaining channel around the flange; replace any fasteners if required by OEM instructions.

This spacer provides a precise gap for proper alignment and clearance between components, helping maintain correct part positioning for reliable operation. It's a simple replacement that restores intended spacing and reduces wear. What it does:

• Positions and separates adjoining parts to maintain correct clearance
• Helps prevent rubbing, misalignment, or binding of moving components
• Restores factory spacing after maintenance or part replacement
• Fits where the original spacer was used to support assembly alignment

• One spacer as shown

• Inspect surrounding components and mounting surfaces for damage before installing
• Remove power to the appliance and follow manufacturer service instructions
• Install in the same orientation as the original spacer and verify proper clearance
• If fasteners or adjacent parts are worn, replace them to ensure a secure fit

This dual infinite switch controls heat output for a stove surface element, restoring reliable temperature selection and consistent cooking performance. It replaces a faulty control on compatible electric ranges. What it does:

• Regulates power to a surface burner so heat changes smoothly across settings
• Allows selection of low, medium and high heat via the front knob
• Commonly replaces switches that cause burners to stay cold, not heat evenly, or skip settings
• Works with dual-element (inner/outer) surface burners to manage both elements

• One infinite switch (dual-element style)

• Disconnect power at the breaker before starting; verify power is off
• Handle glass-ceramic cooktops carefully to avoid cracks or chips
• Match terminal layout and orientation before connecting wires; secure all spade terminals
• Test burner function after installation and reassemble cooktop components

Color: Biscuit.

Color: White. Size: 1 qt. can. Acrylic appliance paint.

For broil pan use WP3196076.

For broil pan grid use WP3195996.