Kenmore Range 790.36672400 (79036672400, 790 36672400) Parts

Genuine Frigidaire part

Switch

By: Frigidaire

Part Number: 318120711

Genuine Frigidaire part

Trim, Door , White , Top

By: Frigidaire

Part Number: 318176646

Genuine Frigidaire part

Range Electronic Oven Control Board

By: Frigidaire

Part Number: 318185488

If your oven clock is unresponsive or timed bake won't work, this electronic control board manages clock functions and delayed-start settings for your range.

Genuine Frigidaire part

Door Front Assembly

By: Frigidaire

Part Number: 318187715

Genuine Frigidaire part

Spring, Oven

By: Frigidaire

Part Number: 318192400

Genuine Frigidaire part

Housing,Oven Light

By: Frigidaire

Part Number: 318222400

Genuine Frigidaire part

Igniter Switch And Harness Assembly

4.0 (1)

By: Frigidaire

Part Number: 318232618

The igniter switch and harness assembly is the wiring and switch set that sends an electrical signal to the igniter when you turn a burner knob on your gas range. It connects the control knobs to the spark module, triggering the clicking sound and spark that lights the burner. Replace this part if a burner won't spark, sparks continuously on its own, or if clicking persists even after the burner is lit.

Do-It-Yourself Stories from Customers like You Range burners would not light Terrence P. • Seattle , WA • May 24, 2015

After replacing the burner twice and verifying the fuel holes and orifice was not blocked, we fixed the problem by replacing the wiring harness P/N: AP3965774. That and making sure the burner was tightly screwed into the range base to ensure the correct spark gap. Read more

Genuine Frigidaire part

Bushing

By: Frigidaire

Part Number: 318233401

Genuine Frigidaire part

Valve,Top Burner,9500 Btu

By: Frigidaire

Part Number: 318233910

Genuine Frigidaire part

Seal,Window

5.0 (1)

By: Frigidaire

Part Number: 318293501

Do-It-Yourself Stories from Customers like You We had an f1 error on our frigadare stove Greg C. • Cincinnati , OH • March 20, 2015

Ordered a new clock/timer control. This was very easy to install the real trick was removing about 8 wires and 4 plug in connectors from the board and then reinstalling them back in the same location as the were before. I took a photo of the board with my IPhone before taking all the wires off, this made it very easy to reinstall the wires on the same terminals as before. There are 2 additional connectors on the board that a flat ribbon cable from the touch button panel attaches to. Do not just... Read more