Kenmore Refrigerator 795.51319012 (79551319012, 795 51319012) Parts

This drawer tray is the replacement interior tray that supports and organizes items inside the refrigerator drawer, restoring smooth storage and preventing items from sliding or contacting drawer components. What it does

• Provides a stable, flat surface inside a refrigerator drawer for food storage and organization.
• Supports produce and deli items so contents sit evenly and the drawer closes properly.
• Replaces cracked, warped, or damaged trays that can cause items to tilt or catch during drawer use.
• Helps maintain interior cleanliness by providing an easy-to-remove surface for wiping spills.

• One drawer tray (single replacement part as sold)

• Remove food and empty the drawer before replacing the tray.
• Lift the drawer out according to the refrigerator manual, replace the tray, then slide the drawer back in.
• Handle with care to avoid chipping edges; use gloves if needed.

This tray assembly is the interior storage tray used in compatible refrigerators. It restores a secure, level surface for organizing food and containers when the original tray is cracked, damaged, or missing.

• Provides a stable surface to hold and organize items inside the compartment
• Fits onto the appliance's existing supports/rails for proper seating
• Replace when cracked, warped, or when support tabs are broken
• Common symptoms: broken or missing tray, won't stay in place, wobbles or tilts

• Disconnect power before servicing interior components
• Remove nearby items, then lift out the damaged tray
• Align the new tray with the guides/tabs and set fully into place—do not force
• Handle cold plastic carefully; allowing it to warm to room temperature can reduce the risk of cracking

The Ice Bucket Assembly stores the ice produced by your refrigerator and feeds it to the dispenser. Replace a cracked or worn bucket to restore reliable ice storage and smooth, consistent dispensing.

• Holds and organizes ice in the freezer/ice compartment for dispensing
• Interfaces with the dispenser drive to move ice toward the chute
• Guides cubes during dispense to help minimize jams
• Damage may cause no or slow ice dispensing, loud grinding during dispense, or a cracked/broken bin or tabs

• Disconnect power to the refrigerator before servicing
• Open the ice compartment/freezer door and pull the existing bucket straight out; empty any remaining ice
• Align the drive connection and slide the new bucket fully into place until it seats
• Discard old ice, allow fresh ice to form, and test dispensing (cube/crush if available)

It contains the defrost temperature sensor and the defrost thermal fuse.

This harness joint is a wiring connector that links two sections of an appliance wiring harness, restoring electrical continuity and reliable signal/power transfer. Use it to replace a damaged, loose, or corroded harness connection. What it does:

• Joins wiring harnesses so power and control signals pass between components
• Restores intermittent or lost electrical connections caused by broken or corroded terminals
• Helps eliminate symptoms like no power to a module, intermittent operation, or communication failures
• Maintains proper routing and strain relief where harness sections meet

• Disconnect power (unplug or shut off breaker) before inspecting or replacing wiring
• Match connector shape and terminal arrangement before installation; secure firmly until it clicks or seats
• Avoid forcing pins; inspect adjacent wires and insulation for damage and replace if needed

This dairy bucket is the removable door bin that holds butter, cheese and small dairy items for easy access and organization. It restores a broken or missing door storage bin so food stays contained and accessible. What it does:

• Provides a dedicated, shallow storage area for butter, cheese and other small items on the refrigerator door
• Replaces cracked, broken or missing door bins that no longer stay secured or leak onto lower shelves
• Keeps dairy items contained to prevent spills and improve door organization
• Fits into the door bin track and snaps into place to hold lightweight items

• One dairy bucket

• Removes and installs by lifting or unhooking the old bin from the door rails and snapping the replacement into the same position
• Use gentle pressure to seat the bin; do not force or wedge to avoid damaging the door rail
• Clean with mild soap and water before first use and after spills; avoid abrasive cleaners
• Handle carefully to avoid chipping or cracking the plastic

This replacement fan assembly restores airflow in your appliance's cooling system to help maintain proper temperature and circulation. It's a direct-fit replacement designed to stop airflow-related issues and reduce noise from a failing fan. What it does:

• Circulates air across evaporator/condenser coils to support proper cooling and defrost cycles
• Replaces a worn or failed fan that can cause warm compartments or poor cooling
• Helps eliminate unusual humming, grinding, or rattling caused by a damaged fan blade or motor
• Supports even temperature distribution and can reduce frost buildup when fan operation is restored

• Disconnect power before starting; work on powered appliances can cause shock or injury
• Handle the fan blade carefully to avoid bending blades or damaging the motor
• Secure mounting fasteners to prevent vibration

This guide is the replacement drawer slide guide that supports and aligns a refrigerator drawer for smooth, stable opening and closing. Restore proper drawer travel and help prevent binding, sagging, or uneven movement. What it does:

• Supports the drawer on its track and keeps it aligned.
• Guides the drawer during opening and closing for smooth travel.
• Prevents the drawer from binding, sagging, or coming off the track.
• Reduces noise and wobble caused by worn or broken guides.

• Always unplug the appliance or turn off power at the breaker before starting repairs.
• Remove the drawer to access the guide.
• Inspect the mating track and adjacent guides; replace any damaged parts to ensure proper fit.
• Tighten fasteners securely but avoid over-tightening to prevent damage.