Kenmore Refrigerator 795.78402800 (79578402800, 795 78402800) Parts

This connector secures and transmits motion between the drawer drive and the sliding assembly, restoring smooth drawer movement and alignment. It's a direct-fit replacement that helps fix sticking, slipping, or non-moving drawers. What it does:

• Couples the drawer drive mechanism to the sliding gear, allowing the drawer to open and close reliably
• Replaces worn or broken connector teeth or mounts that cause skipping or jammed operation
• Helps correct uneven or noisy drawer movement caused by damaged linkage
• Restores proper engagement so the drawer responds to normal open/close controls

• One connector as shown

• Disconnect power to the appliance before servicing to avoid electrical shock or injury
• Inspect surrounding gears, tracks, and mounting points; replace any damaged parts for best results
• Basic hand tools are typically required; handle plastic gears carefully to avoid further damage

This replacement tube restores proper fluid routing in compatible LG appliances, helping stop leaks and restore normal operation. It matches the factory part form and fit for a direct swap when the original tube is damaged or worn. What it does

• Channels water or condensate where the appliance design requires to prevent pooling or flooding
• Replaces cracked, split, or clogged tubing that can cause leaks or poor drainage
• Helps eliminate intermittent leaks that appear during fill, drain, or cycle operation
• Restores original routing to prevent misdirected water that can damage other components

• Disconnect power and, if applicable, shut off the water supply before starting any repair
• Inspect surrounding clamps, seals and connections; replace any worn fasteners for a secure fit
• Route the tube exactly as the original to avoid kinks or pinch points that can cause future failure

This reflector lamp is the interior light housing that helps direct and diffuse the refrigerator/freezer bulb for brighter, more usable interior illumination. Replaces a cracked, discolored, or missing reflector to restore even light inside the compartment. What it does:

• Reflects and directs the interior lamp's light to improve visibility inside the compartment
• Covers and protects the light bulb and lamp socket from splashes and debris
• Helps reduce hot spots and uneven lighting caused by a damaged reflector
• Common symptom: interior light is dim, uneven, flickering, or reflector is cracked/discolored

• One reflector lamp housing

• Disconnect power to the appliance before starting any repair
• Typically secures with a few screws or snap tabs; use appropriate screwdriver and keep fasteners
• Handle carefully to avoid cracking the plastic; check the bulb and socket when replacing the reflector
• Test the light after reassembly and restore power only when the housing is properly installed

This shelf net is a mesh-style refrigerator shelf designed to support and contain food items while allowing airflow. It replaces torn, stretched, or missing nets to restore storage organization and help prevent items from shifting. What it does:

• Provides a flexible, ventilated surface for storing packaged foods, produce, or deli items
• Helps keep small or irregularly shaped items from falling through larger shelves
• Restores proper storage function when original netting is damaged, loose, or missing
• Compatible with designated shelf frames and snaps into place where equipped

• Unplug the appliance or turn off power to the unit before servicing for safety.
• Empty and remove food items from the affected shelf area before installation.
• Install by aligning the net with the shelf frame and securing per the owner's manual; do not force or modify parts.
• If installation requires removal of shelves or trim, keep fasteners and small parts organized and follow manufacturer instructions.

This replacement guide provides a secure mounting surface to keep the appliance component aligned and operating smoothly. It restores proper fit and reduces rubbing or binding caused by a worn or broken guide. What it does

• Positions and supports the associated component to prevent misalignment and excessive movement
• Reduces scraping, rubbing, or grinding noises caused by a damaged guide
• Helps drawers, doors, or internal assemblies slide and seat correctly
• Restores smooth operation when original guide is cracked, worn, or missing

• One replacement guide

• Disconnect power (and water, if applicable) before starting any repair
• Minimal hand tools are typically required; follow the appliance service manual for exact steps
• Inspect surrounding clips, screws, and tracks; replace any damaged hardware for best results

This drip tray catches and channels defrost and condensation water under the appliance to prevent pooling and water damage. It's a direct-fit replacement that restores proper drain flow and reduces leaks. What it does

• Collects defrost and condensation water from the evaporator area so it drains to the evaporation area or drain.
• Helps prevent water pooling beneath the appliance that can cause floor damage or mildew.
• Restores proper routing of meltwater after ice or defrost cycles.
• Use when the original tray is cracked, warped, clogged, or missing.

• One drip tray

• Disconnect power to the appliance before starting any repair to avoid shock.
• Access typically requires removing lower access panels or pulling the appliance away from the wall; follow your model's service instructions.
• Inspect and clear the drain tube and surrounding area while replacing the tray to ensure proper drainage.

This motor bracket is the OEM-style mounting bracket that secures the appliance motor to the cabinet, keeping the motor aligned and reducing vibration for reliable operation. It helps restore proper motor support and stable running. What it does:

• Provides a secure mounting point to hold the motor in correct position
• Maintains motor alignment to prevent belt slip and uneven wear
• Reduces vibration and noise caused by a loose or damaged motor mount
• Can resolve symptoms such as unusual motor noise, excessive vibration, or motor movement during operation

• Disconnect power (and gas if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance service manual for access steps
• Inspect surrounding components (mounting fasteners, motor and belts) and replace any damaged parts

This motor mounting bracket secures the appliance motor to the cabinet, keeping the motor aligned and reducing vibration for reliable operation. It's a direct-fit replacement that restores proper motor support and helps quiet noisy operation. What it does:

• Secures and positions the motor to maintain correct alignment with the drive components
• Dampens vibration and helps prevent motor movement that can cause noise or wear
• Restores proper clearance between the motor and surrounding parts to prevent rubbing
• Helps ensure smooth power transfer from motor to driven components

• Disconnect power to the appliance before service to avoid shock or injury
• Remove panels and other components as needed for access; keep fasteners for reassembly
• Inspect mounting hardware and replace damaged screws or clips; tighten to OEM spec