Kenmore Dryer 796.69002010 (79669002010, 796 69002010) Parts

The Dryer Thermistor is an OEM part for LG dryers, designed to monitor and help regulate the temperature within the dryer by providing feedback to the control board about the temperature inside the drum. This allows the dryer to adjust its heat settings accordingly, preventing overheating and ensuring clothes are dried evenly and safely.

Symptoms of a bad Dryer Thermistor include:

• Clothes not drying properly or taking longer than usual to dry.
• The dryer repeatedly stopping during a cycle.
• Error messages appearing on the dryer's display panel.
• The dryer getting too hot or not heating enough.

Causes of a bad Dryer Thermistor can include a buildup of lint and debris affecting its ability to accurately sense temperature, wear and tear over time, or electrical issues within the dryer's circuitry.

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Drum Motor Assembly is an OEM part for LG dryers. It serves as the powerhouse that drives the drum, enabling it to tumble clothes during the drying cycle. This essential component ensures your dryer operates smoothly, providing the necessary torque for consistent and efficient drying performance.

Causes of failure might include wear and tear from prolonged use, overload from trying to dry heavy loads, electrical issues like short circuits, or physical damage to the motor components. 

Symptoms of a bad Drum Motor Assembly include:

• The dryer drum fails to turn, even though the dryer powers on.
• Unusual noises, such as humming or buzzing, indicating the motor is struggling.
• The dryer stops unexpectedly during cycles or won't start at all.
• Decreased drying efficiency or clothes taking longer to dry due to inconsistent drum speed.

This OEM LG part is also compatible with Sears/Kenmore.

The Door Switch Assembly is an OEM part for LG dryers. It ensures the dryer operates only when the door is securely closed, acting as a safety feature to prevent the dryer from running while the door is open.

Causes of a bad door switch assembly can include regular wear and tear from frequent use, electrical issues such as shorts or faulty connections, or physical damage from forceful door closures or impacts.

Symptoms of a bad door switch assembly include:

• The dryer not starting
• The dryer stopping mid-cycle
• The drum light not turning on or off correctly
• The dryer continuing to run with the door open

This OEM LG part is also compatible with Sears/Kenmore models.

The Dryer Drum Baffle is an OEM part for LG dryers. This baffle is attached to the inside of the dryer drum and is designed to help lift and tumble clothes during the drying cycle. 

Causes of a bad dryer drum baffle can include wear and tear from regular use, physical damage from heavy or sharp objects, or becoming loose due to vibration over time. 

Symptoms of a bad dryer drum baffle include:

• Thumping or banging noises during the drying cycle
• Clothes not tumbling properly, leading to uneven drying
• Loose or rattling baffle inside the drum
• Visible damage or breakage on the baffle

This OEM LG part is also compatible with some Kenmore models.

Replacement interior lamp assembly that restores illumination inside your refrigerator so you can see food and shelves clearly. Replaces worn or damaged light units to improve visibility and normal operation. What it does:

• Provides interior lighting so you can find items and check contents easily
• Replaces lamps that are burned out, dim, flickering, or physically damaged
• Sits in the appliance's existing lamp housing and works with the factory socket
• Helps maintain safe visibility when loading, unloading, or organizing the fridge

• Always disconnect power to the appliance before servicing to avoid shock
• Remove food and shelves as needed for safe access to the lamp housing
• Handle the lamp by the housing; avoid touching the light surface or bulb with bare hands

This metal mounting bracket secures internal components to the appliance frame, restoring proper alignment and reducing movement. Replace a worn or damaged bracket to stop rattling and maintain stable operation. What it does:

• Provides structural support to hold panels, controls, or assemblies in place
• Prevents excess vibration and noise caused by loose parts
• Keeps components aligned for reliable mechanical operation
• Helps maintain safe clearances between moving parts

• Turn off power and unplug the appliance before beginning work
• Use appropriate hand tools; retain any original fasteners unless replacements are specified
• Inspect adjacent parts and mounting points for damage; replace if worn

A replacement latch body that secures the appliance door and helps ensure a proper, reliable seal. Restores correct door engagement so cycles can start and run safely. What it does

• Provides the main latch mechanism that holds the door closed during operation.
• Ensures the door stays firmly engaged to maintain a proper seal and safe operation.
• Can prevent the appliance from starting or completing cycles if the door won't stay latched.
• Common symptom linkage: door won't stay closed, door feels loose, or appliance fails to start because the door won't engage.

• Disconnect power (and water, if applicable) before beginning any repair.
• Access may require removing the door trim or front panel; follow the appliance's service instructions.
• Handle sharp edges and small fasteners carefully; keep removed screws in a labeled container.
• Test door engagement and run a short cycle after installation to ensure proper operation.

The Dryer Top Panel Assembly is an OEM component specifically designed for LG dryers. This top panel is responsible for covering the top of the dryer and protecting internal components. 

Causes of a bad top panel can include cracks, dents, or warping of the plastic over time from repeated use and heat exposure. The coated surface can also show signs of wear like scratches, scuffs, or peeling/flaking of the finish.

Symptoms of a bad top panel include:

• drafts or air leaks around the top of the dryer 
• loose, wobbly, or misaligned panel
• exposed internal components
• diminished aesthetic appearance

This OEM LG part is also compatible with select Sears/Kenmore models.

This sub tub assembly replaces the inner drum housing that supports the wash basket and channels water during cycles. It restores proper drum support and helps stop rubbing, banging, or abnormal noise during operation. What it does:

• Houses and supports the wash basket so laundry tumbles correctly
• Directs wash and rinse water within the washer cabinet
• Prevents metal-to-metal contact that can cause noise or fabric damage
• Helps maintain proper drum alignment and smooth rotation

• Disconnect power and water supply before starting work
• This is a heavy, bulky component — have a helper or use lifting aids
• Inspect and replace any associated seals, gaskets, or bearings as needed

This cabinet cover assembly replaces the dryer or washer top cabinet panel to restore the appliance's exterior protection and clean appearance. It provides a secure, factory-style fit for the machine's top section. What it does:

• Covers and protects internal components under the top of the cabinet from dust and debris
• Restores the appliance's finished appearance after damage or corrosion to the top panel
• Helps maintain proper airflow and sealing around the top area when installed correctly
• Compatible where OEM part ACQ75450501 is specified

• Installer level: moderate; basic disassembly of the appliance top may be required
• Disconnect power and, if applicable, water before starting work
• Keep mounting hardware and clips from the original panel; use only confirmed OEM fasteners