Kenmore Range 960.7022891 (9607022891, 960 7022891) Parts

Best Seller

Genuine Whirlpool part

Broil Pan Set

By: Whirlpool

Part Number: 4396923

The Broil Pan Set is an OEM part for Whirlpool ovens. This set includes a broil pan and an insert, designed to catch drippings and ensure even heat distribution during broiling, allowing for perfectly cooked and crisp results.

Causes of a bad broil pan set can include prolonged exposure to high temperatures, which may lead to warping or distortion of the pan. Additionally, frequent use without proper cleaning can result in rusting, chipping, or buildup of residues that compromise the pan's functionality and safety.

Symptoms of a bad broil pan set include:

Warping or bending of the pan
Presence of rust or corrosion
Surface chipping or flaking
Difficulty in achieving even cooking results

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You There was no problem Harry M. • Olivebranch , MS • March 10, 2015

I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more

$46.95

Compare At:: $55.40
You Save:: $8.45

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (Black)

5.0 (1)

By: Whirlpool

Part Number: WP7101P126-60

This factory fastener secures panels, trim, or brackets on your appliance. Replacing a missing or stripped screw restores a snug, rattle-free fit and keeps components aligned for proper operation and a clean, finished appearance.

Fastens exterior panels, trim pieces, or internal brackets to the appliance chassis
Replaces lost, damaged, or stripped hardware
Helps prevent vibration, rattling, and gaps between parts
Common signs you need this screw: missing hardware, loose or misaligned panel/trim, stripped head or threads

What's included: One screw Install notes:

Disconnect power before servicing; also shut off the gas supply
Use the correct driver; start the screw by hand to avoid cross-threading
Tighten snugly—do not overtighten to prevent stripping or cracking adjacent parts
Repair or replace the mounting point before installing

Do-It-Yourself Stories from Customers like You Oven element was burnedout Robert J. • Hope , ME • February 08, 2015

Turned off breaker,unscrewed (2 screws) element,pulled element out from back of oven,unplugged 2 wires, attached wires to new element, pushed back in, installed retaining screws Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Switch, Burner Ignitor (Spark Switch)

5.0 (1)

By: Whirlpool

Part Number: WP4157180

This burner ignitor switch controls spark delivery to a cooktop burner so the burner lights when the knob is turned. It replaces a worn or failed switch to restore ignition responsiveness and consistent sparking. What it does:

Routes spark current to the surface burner ignitor when the control knob is turned
Stops spark delivery when the control knob is released or turned off
Commonly used when a burner fails to spark or sparks intermittently
Works with the cooktop's ignition system to enable safe, reliable lighting

What's included:

One burner ignitor switch

Install notes:

Disconnect power (and gas if applicable) before servicing to avoid shock or injury
Access may require removing the cooktop or control panel
Verify wiring and switch operation with a multimeter before replacement

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You No spark at burners Brandon C. • Brooklyn , NY • January 14, 2017

I installed two burner ignitions under the knobs then installed a new spark module, which I had to order from a different vendor as this is a 20+ year old Caloric stove. Fortunately this spark module is used in many other appliances. Read more

$53.95

Compare At:: $64.20
You Save:: $10.25

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Igniter Switch (Spark)

5.0 (2)

By: Whirlpool

Part Number: WP878009

This oven igniter switch controls the spark ignition for a gas oven, allowing the burner to light reliably so the oven can heat. It replaces a worn or failed switch to restore safe ignition operation. What it does:

Sends spark signal to the bake/oven burner igniter to initiate ignition
Commonly replaces a switch that causes no spark, intermittent ignition, or clicking without lighting
Works as part of the oven's ignition system to help ensure consistent burner lighting
Matches OEM function and mounting for direct replacement

What's included:

One oven igniter switch as pictured

Install notes:

Disconnect power and gas supply before starting any repair
Basic mechanical skill and common hand tools are typically required;
Do not force connectors; ensure proper grounding and secure connections before testing

Do-It-Yourself Stories from Customers like You Sparking & burners Gregory G. • Endicott , NY • December 29, 2016

Have a good old Caloric stove/oven but the horizontal design left the knobs open to grease and water dripping downward into the control knobs. This fouled up the sparking of the oven and one burner on stove. also the front 2 deteriorated burners were allowing some flames to pass under the stovetop. However, as is often the case with the older models(like my 1991 Audi 100), if you can find the parts they can be fixed with one replaced here and there. APP fulfilled my order with excellent... Read more

$51.27

Compare At:: $61.01
You Save:: $9.74

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Glide-Drwr

By: Whirlpool

Part Number: W10709871

$10.54

Compare At:: $12.20
You Save:: $1.66

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Ignitor, Griddle

By: Whirlpool

Part Number: Y07491203

Genuine Whirlpool part

Module, Spark 2+1

5.0 (1)

By: Whirlpool

Part Number: 31829401

Do-It-Yourself Stories from Customers like You Electronic ignition won't spark Lloyd B. • Washington Dc , DC • May 14, 2015

I emailed a photo of my possible problem part since my appliance was over 25 years old. The research part found the correct part number and I founded the replacement part video on the site. Remove the few screws from the back and exchange the wires from the original part to the new part and I was done. I got new life in my oven thanks to Allyson and the research staff at AppliancePartsPros.com. Read more