Lg Range 83543 Parts

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

This part mounts on the cooktop and supports the small "auxiliary" burner assembly. It channels gas from the orifice to the burner head so the simmer burner lights reliably and produces a steady, even flame.

• Secures and centers the auxiliary burner head/cap on the cooktop
• Directs gas flow from the orifice to the burner head for proper combustion
• Helps position the igniter adjacent to the burner head for reliable lighting
• Common symptoms include hard-to-light or non-igniting small burner, uneven/weak flame, or a burner head that won't sit level due to a damaged base

• Shut off gas supply and disconnect power; allow the surface to cool completely
• Remove grates, burner caps, and burner heads to access the base; remove mounting hardware
• Transfer existing components (such as the orifice holder and igniter) to the new base
• Reassemble, restore gas, and check all connections for leaks before use

Threaded nut assembly secures internal components in your microwave. Replace if stripped, worn, or missing to eliminate rattling and maintain alignment.

Microwave won't heat? A failing high-voltage capacitor disrupts the heating circuit. This part stores electrical energy for consistent operation.

Replace your microwave's burned-out halogen interior bulb to restore bright, clear lighting. Easy install when bulb dims or fails. Verify fit by model.

This is a metal cooking rack designed to sit inside the microwave oven cavity, providing a second level for heating multiple items at once. It allows for more even cooking by elevating food closer to the center of the microwave's energy field. Replace this rack if it is bent, has damaged feet or support clips, or if the protective coating is chipped or worn, which can cause arcing during use.

The TEMPLATE is an OEM part for LG microwaves. It is the outer casing and control panel covering that defines the microwave's design and aesthetics.  

The causes of a bad template can include cracks, dents, or damage to the outer surface from impacts or normal wear over time. Heat and humidity fluctuations can also cause template materials to degrade.

Symptoms of a bad template include:

• Cracks or breaks in the template material
• Loose, misaligned, or damaged control panel or display  
• Yellowing, warping, or discoloration of plastics
• Openings or gaps that compromise the microwave structure

This genuine OEM LG replacement part restores the microwave's appearance and protects internal components. It is also compatible with some Kenmore and Sears microwaves
 

Fix scraping and clunking noises from your microwave with this motor support bracket. Secures motor positioning and reduces vibration. 10-minute repair.

If your microwave stops heating after less than a minute but the display stays on, the high voltage transformer may have failed. Moderately difficult repair.

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

Interior light dim or uneven? This clear lens cover protects the bulb and restores even illumination. Simple snap-in installation in minutes.

Fix a microwave door that won't close or latch properly. This door latch holder secures the latch assembly for reliable door alignment and operation.

This auxiliary burner holder mounts on your gas cooktop or range and supports the smaller auxiliary/simmer burner. It properly positions the flame ports and igniter for reliable lighting and an even, stable flame.

• Supports and locates the auxiliary burner over the gas orifice
• Aligns with the igniter for quick, consistent ignition
• Helps maintain even flame distribution and low-heat control
• Common signs of failure: burner won't light or lights intermittently; uneven/yellow flames; burner cap won't sit level or wobbles

• Turn off gas supply and disconnect power; allow the appliance to cool completely.
• Remove grate, burner cap, and burner head from the affected position.
• Note the holder's orientation; detach the old holder and clean the mounting surface.
• Align the new holder with the gas orifice and igniter, secure with the original screws, reassemble, and test burner operation.

This is the main electronic control board for a microwave, managing power supply distribution and coordinating cooking functions. It processes inputs from the control panel and directs power to the magnetron, turntable motor, and other components. Replace this board if the microwave is completely unresponsive, displays erratic behavior, loses power intermittently, or fails to heat food properly.

If your microwave's ventilation isn't circulating air properly, this circulation motor restores airflow. Direct-fit synchronous motor replacement.

Microwave overheating or shutting off unexpectedly? This high-limit thermostat monitors temperature and cuts power if it gets too hot. Easy DIY fix.