Lg Dryer DLE3095W Parts

This kit includes the high limit thermostat and thermal cut-off fuse that protect the dryer from overheating. The thermostat monitors the exhaust temperature and shuts off the heating element if it gets too hot, while the thermal fuse acts as a one-time safety device that permanently breaks the circuit during a dangerous overheat condition. Replace these components if the dryer won't heat, shuts off prematurely, or won't start at all - a blown thermal fuse is a common cause of a completely non-functional dryer.

Metal bracket that secures the hinge to your dryer door or cabinet. Replace if bent, cracked, or broken to restore proper door alignment and support.

This hinge bracket supports the dryer door and secures it to the dryer cabinet, allowing the door to pivot open and closed. It is a structural mounting piece that bears the weight and stress of repeated door use. Replace this bracket if the dryer door is loose, misaligned, sagging, or if the bracket is cracked or bent.

Replacement cabinet cover assembly for your dryer. Restores the outer casing when the original is cracked, dented, or damaged. Essential structural part.

Fix a blank or unresponsive dryer display with this control board assembly. Restores cycle settings, status lights, and error codes to your control panel.

The Drum Motor Assembly is an OEM part for LG dryers. It serves as the powerhouse that drives the drum, enabling it to tumble clothes during the drying cycle. This essential component ensures your dryer operates smoothly, providing the necessary torque for consistent and efficient drying performance.

Causes of failure might include wear and tear from prolonged use, overload from trying to dry heavy loads, electrical issues like short circuits, or physical damage to the motor components. 

Symptoms of a bad Drum Motor Assembly include:

• The dryer drum fails to turn, even though the dryer powers on.
• Unusual noises, such as humming or buzzing, indicating the motor is struggling.
• The dryer stops unexpectedly during cycles or won't start at all.
• Decreased drying efficiency or clothes taking longer to dry due to inconsistent drum speed.

This OEM LG part is also compatible with Sears/Kenmore.

Metal mounting bracket that secures internal dryer components to the frame. Replace if cracked, bent, or broken to restore proper alignment and stability.

Dryer won't tumble or makes loud noise? This complete Drum Tub Assembly restores proper rotation and quiet operation. Major repair, 2-3 hours for experienced DIYers.

This outer door frame replaces the front trim on compatible LG washer/dryer doors to restore the door's appearance and edge alignment. It provides a clean, finished face and supports the door glass and latch assembly. What it does

• Replaces a cracked, bent, or cosmetically damaged outer door frame
• Restores proper door edge alignment and helps the door sit flush when closed
• Supports the door glass and perimeter seal to reduce rattling
• Useful when paint, chips or impact have left visible damage

• One outer door frame

• Disconnect power and gas before beginning any repair
• Remove the door assembly and follow OEM instructions for separating the outer frame from inner components
• Handle glass and trim carefully to avoid cracking; use proper fasteners and torque per OEM guidance
• Verify latch engagement and door seal alignment after reassembly; test operation before regular use

Replaces a cracked or broken inner door frame panel. Restores structural support, maintains proper door closure, and provides a finished interior surface.

This is the rear section of the dryer drum that forms the back wall of the tumbling chamber. It supports the drum structure and works with the front panel and drum seal to contain clothes during the drying cycle. Replace this part if it is cracked, warped, or damaged, which can cause unusual noises, poor tumbling performance, or air leaks that reduce drying efficiency.