Lg Range HC302SDA6 Parts

This radial-lead inductor is a board-mounted magnetic component that helps suppress electrical noise and stabilize current in appliance electronics. Replacing a damaged inductor restores reliable filtering and reduces interference for proper operation. What it does

• Provides inductance for power-supply and EMI/RFI filtering on control and display boards
• Helps reduce electronic noise that can cause erratic behavior or interference
• Supports stable current flow to sensitive circuitry
• Can fail open, shorted, or intermittently, causing control or display issues

• Unplug the appliance and discharge any stored power before servicing
• Requires basic soldering/desoldering skills and ESD-safe handling
• Install in the same orientation and location as the original; do not force leads or damage the PCB

This wire-wound inductor is a fixed choke used on the appliance's control/board assemblies to suppress electrical noise and stabilize current flow for reliable operation. It helps reduce interference that can affect performance. What it does:

• Filters electrical noise and reduces radio-frequency interference (RFI)
• Smooths transient currents to protect sensitive electronics
• Helps maintain stable power to control circuitry under varying loads
• Alleviate symptoms like sporadic control errors or intermittent operation caused by electrical interference

• Replace only with identical part number or OEM-specified equivalent.
• Disconnect power before accessing control boards or wiring to avoid shock.
• Handle the component and surrounding PCB carefully to prevent damage.

This wire-wound radiator inductor helps suppress electrical noise and stabilize current in the appliance's power circuitry, protecting sensitive components and helping the appliance run reliably. What it does:

• Filters and reduces electromagnetic interference (EMI) on the power/inverter board
• Smooths current pulses to prevent voltage spikes that can affect other components
• Helps maintain stable operation of the control or inverter circuitry
• Resolves symptoms such as intermittent operation, electrical noise, or board-level faults associated with EMI

• One wire-wound radiator inductor

• Recommended for replacement only when part is visibly damaged or faulty; compare part numbers before ordering
• Disconnect power and unplug the appliance before accessing the control/inverter board
• Handle the PCB and surrounding components carefully to avoid ESD or mechanical damage

This carbon film resistor is a fixed-value through-hole component used on appliance control circuitry to limit current and stabilize signals. It restores proper circuit function when the original resistor is damaged. What it does:

• Limits current and drops voltage to protect and bias control board components
• Helps stabilize sensor and timing circuits for reliable operation
• A failed resistor can cause intermittent power, control errors, or non-functioning controls
• Small, passive part often found soldered to a printed circuit board

• Disconnect power and unplug the appliance before starting any repair
• Part is soldered to the control PCB; basic soldering/desoldering skills and ESD precautions required
• Verify the resistor's markings and value before installation to ensure an exact match

This carbon-film resistor is a board-mounted replacement that restores proper circuit resistance and helps return affected appliance electronics to expected operation. Use it to replace a damaged or open resistor on the control board. What it does

• Limits current and sets circuit voltage for specific control board functions.
• Replaces resistors that are visibly burned, cracked, or measure open/incorrect with a multimeter.
• Can stop intermittent electronics behavior, random resets, or functions that won't engage due to a faulty resistor.
• Works as a direct board-mounted component used in appliance control and power circuits.

• Disconnect power before starting and verify circuits are de-energized.
• Replacement requires basic soldering/desoldering skills and ESD precautions.
• Match the replacement resistor value and orientation exactly; do not substitute without verifying specs.