Lg Dishwasher LDF8574ST Parts

The Upper Rack Assembly is an OEM part for LG dishwashers. This part provides a durable and efficient space for washing glasses, cups, and smaller dishes. This assembly maximizes the cleaning capacity of your dishwasher, allowing for the organized placement of items to ensure they are thoroughly cleaned and dried.  

Causes for issues with the upper rack assembly often involve prolonged exposure to water and detergent, leading to rust or corrosion, physical damage from loading or unloading, or wear and tear from regular use.

Symptoms of a malfunctioning Upper Rack Assembly include:

• Difficulty sliding the rack in or out
• Rust or corrosion that can lead to stains on dishes
• Broken or missing tines affecting the rack's ability to hold dishes securely

This OEM LG part is also compatible with some Kenmore models.

Dishwasher dishrack roller and axle assembly. Installs on upper or lower dish rack to allow smooth gliding. Replace if broken, cracked, or missing.

This sensor monitors water flow inside the dishwasher to ensure proper water circulation during wash and rinse cycles. It sends signals to the control board to regulate water intake and pump operation. Replace this sensor if the dishwasher displays error codes related to water flow, fails to fill properly, or stops mid-cycle due to incorrect flow detection.

Closes off the bottom of the dishwasher cabinet to protect internal components. Replace if the panel is cracked, missing, or won't stay secured.

Creates a watertight seal to prevent leaks in your dishwasher. Replace when worn or cracked to stop water damage. Confirm fit with your model number.

Replace cracked or worn dishwasher leveling legs. This foot assembly installs at the base corners to restore proper height adjustment and stability.

This is a common fastening nut used to secure panels, trim, or components on compatible LG appliances. It provides a simple, reliable way to hold mating parts in place and restore proper fit and function. What it does

• Secures panels, brackets, or hardware to prevent movement or vibration
• Stops rattling or loose parts caused by a missing or worn nut
• Restores proper alignment when replacing damaged or stripped fasteners
• Works where a standard threaded nut is required for reassembly

• One common nut as pictured

• Disconnect power and water before servicing the appliance
• Use the properly sized wrench or socket to avoid rounding the nut
• Do not overtighten; tighten until snug and secure per OEM torque guidance
• Replace like-for-like—thread size and type match the original

This clamp secures hoses or wiring to the appliance chassis to prevent movement, chafing, and vibration-related wear. It helps keep connections stable so hoses and wires stay in place during normal use. What it does:

• Holds water, drain or vent hoses in position to reduce strain and prevent rubbing
• Keeps wiring harnesses routed and fastened to avoid chafing or accidental disconnection
• Reduces vibration-related noise caused by loose hoses or wires
• Helps prevent hose kinks and unintended movement that can lead to leaks or intermittent electrical issues

• One clamp

• Disconnect power to the appliance before servicing; shut off water supply if working with water lines
• Remove panels as needed to access the hose or wiring route, then replace the clamp in the same orientation
• Use appropriate pliers or a screwdriver if required; do not overtighten or deform the hose or wiring
• If the original clamp was secured with a fastener, retain and reuse it only if undamaged; replace any stripped or broken hardware

This is a protective cover that fits over the electrical terminal block or wiring connections on a dishwasher. It shields the wiring and electrical connections from moisture and accidental contact, ensuring safe operation. Replace this cover if it is cracked, broken, or missing, as exposed electrical connections pose a safety hazard.

Secures the dishwasher door to the cabinet and provides a stable pivot point. Replace if your bracket is cracked, broken, or missing to restore alignment.

This assembly includes the leveling leg adjuster components used to properly level and secure the dishwasher within its cabinet opening. It allows you to raise or lower the appliance so the door aligns correctly and the unit sits stable on uneven floors. Replace this kit if the dishwasher rocks, tilts, or if the existing leveling legs are stripped, broken, or no longer hold their position.

Fix a loose, broken, or wobbly dishwasher door with this handle. Simple installation using basic tools. Compatible with multiple models.

A direct-replacement interior tray that provides a stable surface inside the appliance to hold dishes and catch spills. Replaces a cracked, warped or missing tray to restore a secure, easy-to-clean cooking or storage surface. What it does:

• Provides a level surface to hold food, pans or containers inside the appliance
• Helps contain spills and crumbs for easier cleanup and maintenance
• Restores correct fit and support when the original tray is damaged or missing
• Eliminates wobbling or instability caused by a broken or warped tray

• Always disconnect power to the appliance before servicing
• Remove any food, cookware and the damaged tray before installing the replacement
• Set the tray into position, aligning any tabs or slots; most tray installs are tool-free
• Handle carefully if the tray is glass or brittle; discard the damaged tray safely

Replaces cracked, faded, or damaged console trim on your dishwasher. Restores a clean look and protects controls from spills. Direct-fit exterior panel.

Cap cover for dishwasher assembly. Installs to protect internal components. Replace if cracked, broken, or missing to restore proper coverage.

Dishwasher roller stopper secures the lower rack guide assembly. Replace if cracked, broken, or missing to prevent rack misalignment and noise.