Lg Microwave LMV1642DS1 Parts

Genuine Lg part

Board Assembly,Latch

By: Lg

Part Number: 3501W1A019D

The Door Latch Housing and Interlock Switch Assembly is an OEM replacement part for LG microwaves. It consists of the protective door latch housing casing along with the two-door switches and interlock switch.

The interlock switch prevents microwave energy from being generated inside the oven when the door is open. It shuts off all power once a faulty seal is detected between the door and cavity.

Symptoms of issues can include:

Microwave failing to turn on or cook with the door open
Sparking or arcing seen near the door seal or frame
Error codes displayed related to interlock detection faults

Compatible models include some GE, Kenmore, and Samsung units using matching door designs sourced from LG.

Do-It-Yourself Stories from Customers like You Microwave would not cook. everything else worked no heat. Joe H. • San Juan Capistrano , CA • October 21, 2019

Followed the instructions on your "fix it" video on how to test for a bad micro-sensor. Wola! found one of the three micro-sensors was faulty. Replaced the whole board Assembly,latch just in case the other micro-sensors were ready to go bad. Ten minutes and I was back to using the microwave. Read more

Genuine Lg part

Kit Assembly

5.0 (1)

By: Lg

Part Number: 3861W1A043A

Do-It-Yourself Stories from Customers like You No installation parts Larry R. • Mission Viejo , CA • November 24, 2014

I ordered the parts from Appliance Parts Pros. All of the parts needed arrived within a few days of order and were exactly as needed. The micro hood went smoothly. Thanks Read more

Genuine Lg part

Base Plate Assembly

By: Lg

Part Number: 3303W1A061A

Genuine Lg part

Board,Latch

5.0 (1)

By: Lg

Part Number: 3500W1A028B

Do-It-Yourself Stories from Customers like You Open the door and the microwave would start up with the door open Frank Z. • St Cloud , FL • May 12, 2017

Take the top vent off by two screws & then one screw on the side & lifted her up and I could see the 3 switches I need to repair. Then unscrewed the housin to the 3 switches. Took the housin out , put the 3 switches in the new housing & put her in & plug them in . And plug the Nucor and she works like new. Highly recommended to deal with these people good people for the do-it-yourselfer. Read more