Lg Microwave LMV2257BD Parts

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

This part mounts on the cooktop and supports the small "auxiliary" burner assembly. It channels gas from the orifice to the burner head so the simmer burner lights reliably and produces a steady, even flame.

• Secures and centers the auxiliary burner head/cap on the cooktop
• Directs gas flow from the orifice to the burner head for proper combustion
• Helps position the igniter adjacent to the burner head for reliable lighting
• Common symptoms include hard-to-light or non-igniting small burner, uneven/weak flame, or a burner head that won't sit level due to a damaged base

• Shut off gas supply and disconnect power; allow the surface to cool completely
• Remove grates, burner caps, and burner heads to access the base; remove mounting hardware
• Transfer existing components (such as the orifice holder and igniter) to the new base
• Reassemble, restore gas, and check all connections for leaks before use

Threaded nut assembly secures internal components in your microwave. Replace if stripped, worn, or missing to eliminate rattling and maintain alignment.

Microwave won't heat? A failing high-voltage capacitor disrupts the heating circuit. This part stores electrical energy for consistent operation.

This auxiliary burner holder mounts on your gas cooktop or range and supports the smaller auxiliary/simmer burner. It properly positions the flame ports and igniter for reliable lighting and an even, stable flame.

• Supports and locates the auxiliary burner over the gas orifice
• Aligns with the igniter for quick, consistent ignition
• Helps maintain even flame distribution and low-heat control
• Common signs of failure: burner won't light or lights intermittently; uneven/yellow flames; burner cap won't sit level or wobbles

• Turn off gas supply and disconnect power; allow the appliance to cool completely.
• Remove grate, burner cap, and burner head from the affected position.
• Note the holder's orientation; detach the old holder and clean the mounting surface.
• Align the new holder with the gas orifice and igniter, secure with the original screws, reassemble, and test burner operation.

This is a metal cooking rack designed to sit inside the microwave oven cavity, providing a second level for heating multiple items at once. It allows for more even cooking by elevating food closer to the center of the microwave's energy field. Replace this rack if it is bent, has damaged feet or support clips, or if the protective coating is chipped or worn, which can cause arcing during use.

Microwave not responding to buttons or display blank? This control board assembly regulates functions and power levels. Moderate difficulty repair.

Fix erratic display, flickering lights, or no power issues. This power control board restores regulated power and control functions to your microwave.

Fix scraping and clunking noises from your microwave with this motor support bracket. Secures motor positioning and reduces vibration. 10-minute repair.

If your microwave's ventilation isn't circulating air properly, this circulation motor restores airflow. Direct-fit synchronous motor replacement.

Interior light dim or uneven? This clear lens cover protects the bulb and restores even illumination. Simple snap-in installation in minutes.

Complete mounting hardware kit for securing your microwave to cabinets or above the range. Includes all necessary brackets, screws, and fasteners.

This is the exterior door handle used to open and close the microwave door. It mounts to the door panel and provides a grip for pulling the door open. Replace this handle if it is cracked, broken, or loose, making it difficult to open or securely close the microwave door.

Fix a microwave door that won't close or latch properly. This door latch holder secures the latch assembly for reliable door alignment and operation.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts