Lg Washer WFT1032TP Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Washer won't drain or shows OE error? This drain pump assembly removes water during spin cycle. Moderate DIY repair with video guide available.

Note: Per the manufacturer, the design changed  of this washer drain pump changed in April 2025. The new gray casing with different fins will still work, as the fins allow access for wiring.

This rubber fill hose connects the household hot water supply valve to the washing machine's water inlet valve. It delivers hot water into the wash tub during the fill cycle. Replace this hose if it is cracked, leaking, bulging, or showing signs of deterioration to prevent water damage.

This is the internal fill hose that connects the water inlet valve to the wash tub inside the washing machine, delivering cold water during the fill cycle. It is a rubber or reinforced hose with fittings on each end. Replace this hose if you notice leaking underneath or behind the washer, or if the machine is not filling properly with water.

This is a small rubber pad that sits beneath the leveling leg of a washing machine. It helps absorb vibration, reduce noise, and prevent the machine from sliding on the floor during operation. Replace this pad if it is cracked, worn, or missing, which can cause excessive vibration, walking, or noise during the spin cycle.

Replace your washer drive belt if the drum won't spin or makes squealing noises. Connects the motor to the drum for proper agitation and spinning cycles.

Rear cover panel for your washer cabinet. Replaces cracked, broken, or missing rear covers that expose internal components or create gaps in the exterior.

Adjustable leveling leg that supports your washer and allows height adjustment. Replace if damaged, stripped, or missing to restore stability on uneven floors.

Replace your broken or cracked laundry center door handle. This exterior handle installs on the front panel for opening and closing the door.

Fix washer wobbling, noise, and uneven agitation with this pulsator cam assembly. Secures pulsator to transmission for stable rotation and reliable wash performance.

This V belt is the replacement drive belt that turns the dryer drum so clothes tumble and dry evenly. It restores reliable drum rotation and helps eliminate slipping or noisy operation. What it does:

• Transfers motor power to the drum so the drum rotates during the dry cycle
• Commonly fails after wear, causing slipping or the drum not to turn
• Worn or glazed belts can cause squealing or a burning-rubber smell
• Replacing the belt restores proper tension and consistent tumbling

• One replacement V belt

• Disconnect power (and gas supply for gas dryers) before starting any work
• Access the belt by removing the dryer front or top panel per your model's service manual
• Route the belt around the drum and idler pulley, then reattach motor pulley; ensure correct alignment and tension
• Inspect rollers, idler, and motor shaft for wear and replace worn components to prevent premature belt failure