Samsung Washer WF20T6000AWCXD Parts

Fix washer temperature error codes (tE, FE) with a new thermistor. Monitors water temperature for proper cycle operation. DIY-friendly repair with video.

This drain hose assembly routes wastewater from the washer tub to the drain pump to help ensure proper draining and reduce the risk of leaks. It replaces a damaged, cracked or clogged drain hose so machines can empty correctly. What it does:

• Channels wastewater from the tub to the drain pump and drain line
• Restores proper draining when the original hose is cracked, split, crushed or clogged
• Helps stop leaks that occur from damaged or loose drain hose connections
• Addresses symptoms such as standing water in the drum, water under the washer, or intermittent draining

• Disconnect power to the washer before starting any work
• Turn off the water supply and place towels to catch any residual water when removing the old hose
• Remove the old hose and clamps, route the new hose the same way to avoid kinks, and secure with appropriate clamps
• After installation, restore power and run a short drain/spin cycle to check for proper operation and leaks

Secures cables in your washer to prevent electrical issues and ensure reliable connections. Replace if damaged, loose, or causing wiring problems.

This filter guide holds and positions the washer's internal lint/dirt filter so the filter seals and drains correctly, helping maintain wash performance and protect the drain system. Designed to restore proper filter alignment and flow. What it does:

• Secures the filter element inside the housing so water and lint pass through the filter as intended
• Helps prevent filter misalignment that can cause poor draining or debris buildup
• Restores proper drainage path and reduces chance of filter bypass
• Compatible with factory filter assemblies that use a molded guide to position the filter

• One filter guide

• Turn off and unplug the washer and shut off the water supply before servicing
• Remove the access panel or agitator as needed to reach the filter area; follow the service manual for your model
• Inspect seal and surrounding housing for damage; replace any worn components to ensure a watertight fit

Replacement cover assembly that protects the control board (PBA) on your washer. Install if the original cover is cracked, broken, or missing.

Drain hose assembly that connects your washer to the standpipe or drain. Replace if cracked, leaking, kinked, or damaged to restore proper drainage.

Washer not filling or draining properly? The air pressure sensor monitors water levels to control fill and drain cycles. Direct replacement part.

Plastic guide that directs detergent flow in your washer's dispenser. Replace if cracked, broken, or missing to restore proper detergent dispensing.

Connects the detergent drawer to the wash tub in front-load washers. Replace if cracked, leaking, or disconnected to restore proper water flow.

If your washer buttons aren't responding or the display is blank, this control panel assembly restores full cycle selection and settings control.

Maintains watertight seal in your washer drum. Replace if you notice leaks during wash cycles or water pooling. Verify fit with your model number.

This sealed ball bearing replaces a worn drum bearing to restore smoother rotation and reduce noise in laundry appliances. It fits machines that use the 6307-2RZ bearing size and design. What it does:

• Supports and allows the drum or shaft to rotate with reduced friction
• Restores stable, even spinning and helps prevent wobbling
• Reduces grinding, rumbling or squealing noises from worn bearings
• Helps extend life of associated seals and shafts by maintaining proper alignment

• One sealed 6307-2RZ ball bearing

• Requires disassembly of the tub/shaft in many appliances
• Inspect neighboring seals, shafts, and housings; replace damaged components to avoid premature failure
• Use proper tools and follow manufacturer service instructions; wear safety gear and disconnect power before service
• Do not press or install the bearing by applying force to the inner race only; follow OEM guidance for correct installation procedure

This sealed 6306-2RZ ball bearing supports rotating assemblies by reducing friction and ensuring smooth, stable spin. It's a direct-fit replacement for worn bearings in compatible laundry appliance motors and drums. What it does:

• Supports rotating shafts and reduces friction for stable operation
• Maintains alignment to prevent wobble and uneven wear
• Keeps contaminants out with sealed shields for longer service life
• Helps eliminate grinding, scraping or rough rotation when functioning

• Disconnect power (and water if applicable) before beginning any repair
• Use appropriate pullers/press tools to remove and install bearings to avoid damage
• Inspect shaft, housing, and seals for wear; replace damaged components as needed
• Dispose of old bearing safely and avoid contaminating the new bearing with dirt or lubricants

The Washer Drum Clip Ring is an essential component for maintaining the smooth operation of your washer. This genuine OEM part ensures a secure fit within your Samsung washer, providing stability to the drum during each wash cycle. Designed for durability, the Washer Drum Clip Ring helps prevent excessive movement and reduces noise, enhancing the overall performance of your appliance. Easy to install, this clip ring restores your washerGÇÖs functionality, allowing you to continue enjoying efficient and effective laundry cycles. Compatible with a variety of Samsung washer models, this genuine OEM part guarantees reliable performance and longevity. Whether your original clip ring is worn out, broken, or missing, the Washer Drum Clip Ring is the perfect solution to keep your washer running smoothly.