Samsung Washer WF45B6300AV Parts

This is a shipping bolt assembly used to secure the washer drum during transportation, preventing it from moving and sustaining damage. The bolts are installed through the rear panel of the washer and brace the tub in a fixed position. These are needed if you are relocating or shipping your washer - they should be removed before operating the machine, as leaving them in place causes excessive vibration and noise during spin cycles.

Drain pump filter cover assembly for front-load washers. Captures lint and debris to maintain drainage efficiency. Replace if cracked or loose.

Secures hose connections in your washer to prevent leaks and maintain water flow. Replace if you notice drips or loose fittings. Verify fit with your model.

Washer door hinge bracket that mounts the door to the cabinet. Replace if cracked, broken, or the door sags. Ensures secure door alignment and operation.

Fix excessive washer noise and vibration during drain cycles with this pump cushion assembly. Dampens pump vibrations for quieter operation.

Fix excessive vibration or spinning issues in your washer with this flange shaft assembly. Connects the drum to the drive system for smooth operation.

Control panel cover assembly protects the PCB and wiring on your washer. Replace if the cover is cracked, broken, or missing to restore proper protection.

Fix TV that won't power on or shuts off randomly with this power regulator IC. Stabilizes voltage to prevent damage. Moderate soldering skills required.

This sealed ball bearing replaces a worn drum bearing to restore smoother rotation and reduce noise in laundry appliances. It fits machines that use the 6307-2RZ bearing size and design. What it does:

• Supports and allows the drum or shaft to rotate with reduced friction
• Restores stable, even spinning and helps prevent wobbling
• Reduces grinding, rumbling or squealing noises from worn bearings
• Helps extend life of associated seals and shafts by maintaining proper alignment

• One sealed 6307-2RZ ball bearing

• Requires disassembly of the tub/shaft in many appliances
• Inspect neighboring seals, shafts, and housings; replace damaged components to avoid premature failure
• Use proper tools and follow manufacturer service instructions; wear safety gear and disconnect power before service
• Do not press or install the bearing by applying force to the inner race only; follow OEM guidance for correct installation procedure

This sealed 6306-2RZ ball bearing supports rotating assemblies by reducing friction and ensuring smooth, stable spin. It's a direct-fit replacement for worn bearings in compatible laundry appliance motors and drums. What it does:

• Supports rotating shafts and reduces friction for stable operation
• Maintains alignment to prevent wobble and uneven wear
• Keeps contaminants out with sealed shields for longer service life
• Helps eliminate grinding, scraping or rough rotation when functioning

• Disconnect power (and water if applicable) before beginning any repair
• Use appropriate pullers/press tools to remove and install bearings to avoid damage
• Inspect shaft, housing, and seals for wear; replace damaged components as needed
• Dispose of old bearing safely and avoid contaminating the new bearing with dirt or lubricants

Replacement door hinge for front-load washers. Needed when hinge is cracked, broken, or no longer holds door securely. Installs on door frame.

This OEM-compatible lithium-based grease helps reduce friction and wear on moving appliance parts, extending component life and quieting noisy mechanisms. Use sparingly where the manufacturer recommends lubricant for metal-on-metal or metal-on-plastic contacts. What it does:

• Lubricates hinges, slides, bearings and other moving parts to reduce noise and sticking
• Protects against wear and friction during normal operation
• Helps parts move smoothly in high-load or recurring-motion areas
• Resists water washout better than plain oils (helps maintain lubrication in damp areas)

• Use only the amount specified by the appliance manufacturer; excess grease can attract debris
• Clean old grease and debris from the area before applying new grease
• Avoid getting grease on electrical components, heating elements, or visible belts unless the manual allows