Samsung Washer WF50T8500AV Parts

Fix excessive washer noise and vibration during drain cycles with this pump cushion assembly. Dampens pump vibrations for quieter operation.

Protective cover for the washer heating element assembly. Installs inside the tub area. Replace if cracked, broken, or missing to protect internal components.

Fix TV that won't power on or shuts off randomly with this power regulator IC. Stabilizes voltage to prevent damage. Moderate soldering skills required.

Connects the door seal to your washer body to prevent leaks. Replace if water escapes during cycles. Confirm fit with your model number before ordering.

This diaphragm assembly with new nozzle controls water flow in the washer's dispenser/valve area to enable proper dispensing and prevent unwanted leaks. It restores correct water routing for normal wash cycles. What it does:

• Replaces worn or damaged diaphragm that helps direct water through the dispenser/nozzle
• Stops or reduces dispenser leaks and dripping during fill or idle
• Helps restore proper detergent/softener dispensing when the valve is not operating correctly
• Works as the sealing/metering element inside the dispenser/valve assembly

• One diaphragm assembly with nozzle

• Disconnect power and shut off water before starting work
• Access the dispenser/valve housing; small clips and screws may hold the assembly
• Handle the diaphragm gently; ensure sealing surfaces are clean and aligned during reassembly
• Test with a short cycle and check for leaks before returning the washer to regular use

This sealed ball bearing replaces a worn drum bearing to restore smoother rotation and reduce noise in laundry appliances. It fits machines that use the 6307-2RZ bearing size and design. What it does:

• Supports and allows the drum or shaft to rotate with reduced friction
• Restores stable, even spinning and helps prevent wobbling
• Reduces grinding, rumbling or squealing noises from worn bearings
• Helps extend life of associated seals and shafts by maintaining proper alignment

• One sealed 6307-2RZ ball bearing

• Requires disassembly of the tub/shaft in many appliances
• Inspect neighboring seals, shafts, and housings; replace damaged components to avoid premature failure
• Use proper tools and follow manufacturer service instructions; wear safety gear and disconnect power before service
• Do not press or install the bearing by applying force to the inner race only; follow OEM guidance for correct installation procedure

This sealed 6306-2RZ ball bearing supports rotating assemblies by reducing friction and ensuring smooth, stable spin. It's a direct-fit replacement for worn bearings in compatible laundry appliance motors and drums. What it does:

• Supports rotating shafts and reduces friction for stable operation
• Maintains alignment to prevent wobble and uneven wear
• Keeps contaminants out with sealed shields for longer service life
• Helps eliminate grinding, scraping or rough rotation when functioning

• Disconnect power (and water if applicable) before beginning any repair
• Use appropriate pullers/press tools to remove and install bearings to avoid damage
• Inspect shaft, housing, and seals for wear; replace damaged components as needed
• Dispose of old bearing safely and avoid contaminating the new bearing with dirt or lubricants

Washer not heating properly? This heater bracket secures the heating element in place. Common fix for washers that won't heat water. Moderate DIY repair.

Replacement door hinge for front-load washers. Needed when hinge is cracked, broken, or no longer holds door securely. Installs on door frame.

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker so your appliance only fills when needed. Replaces a worn or leaking valve to restore proper filling and stop unwanted dripping. What it does:

• Opens and closes to allow water into the ice maker and dispenser when commanded
• Stops water flow when the dispenser or ice maker is idle
• Commonly replaced for symptoms like no water dispensed, ice maker not filling, or leaking at the valve
• Electrically operated solenoid—activates only when the refrigerator calls for water

• One water inlet valve

• Disconnect power and shut off the water supply before starting
• Drain remaining water from lines to limit spills
• Basic hand tools typically required; handle valve and fittings carefully to avoid damage

Secures water supply hoses to your washer. Replace if cracked, leaking, or broken to restore a tight, leak-free connection at the inlet valve.

Fix water flow issues in your washer with this pressure hose assembly. Restores proper water circulation and pressure. Moderate difficulty repair.

The Washer TAPE-POLY Repair Tape is an essential component for maintaining the performance of your Samsung washer. Crafted as a genuine OEM part, this repair tape ensures a perfect match and reliable functionality for your appliance. Designed specifically for Samsung washers, it guarantees compatibility and seamless integration with your existing setup. The TAPE-POLY features high-quality materials that provide exceptional durability and resistance to wear, helping to extend the life of your washer. Its easy-to-apply design allows for a straightforward installation process, saving you time and effort during repairs. By choosing the Washer TAPE-POLY Repair Tape, you benefit from a solution that restores your washerGÇÖs efficiency and performance without compromising on quality. Whether you are addressing minor issues or performing routine maintenance, this genuine OEM part offers the reliability and effectiveness needed to keep your Samsung washer running smoothly. Trust in the Washer TAPE-POLY Repair Tape to deliver dependable results and enhance your applianceGÇÖs longevity.

This OEM-compatible lithium-based grease helps reduce friction and wear on moving appliance parts, extending component life and quieting noisy mechanisms. Use sparingly where the manufacturer recommends lubricant for metal-on-metal or metal-on-plastic contacts. What it does:

• Lubricates hinges, slides, bearings and other moving parts to reduce noise and sticking
• Protects against wear and friction during normal operation
• Helps parts move smoothly in high-load or recurring-motion areas
• Resists water washout better than plain oils (helps maintain lubrication in damp areas)

• Use only the amount specified by the appliance manufacturer; excess grease can attract debris
• Clean old grease and debris from the area before applying new grease
• Avoid getting grease on electrical components, heating elements, or visible belts unless the manual allows