Thermador Range PD486GDBS Parts

Restore reliable baking performance with this bake heating element. Mounted at the bottom of the oven, it provides the primary heat source in Bake mode so the cavity reaches and maintains the set temperature for consistent results. What it does:

• Heats the oven in Bake mode to reach and hold the set temperature
• Failure can cause no heat in bake, very slow preheating, or uneven/undercooked results
• Visible cracks, blisters, or a broken coil indicate the element should be replaced
• A shorted element may trip a household breaker or blow a fuse

• One bake heating element

• Disconnect power at the breaker and allow the oven to cool before servicing
• Remove oven racks; take out the element's mounting screws and gently pull the element forward to access wire terminals
• Transfer wires one at a time to the new element; do not allow wires to fall back into the insulation
• Reinstall the element and panels, restore power, and test bake operation

Oven slow to heat or not reaching set temperature? This bake heating element restores proper heating. Straightforward DIY repair that can save $500+.

Fix erratic temperature readings or a stuck display on your range. This temperature display assembly restores clear temperature readouts and control feedback.

Fascia panel for gas ranges. Mounts on the front control area. Replace if cracked, chipped, discolored, or damaged to restore appearance.

Replace a cracked or missing spacer for your gas range. This small structural component helps maintain proper spacing between parts during installation.

Internal electrical wire for ranges. Connects electrical components within the appliance. Replace if wire is damaged, frayed, or connection is loose.

Replaces the lower kickplate on your range to restore a finished look and protect internal components. Install when your original panel is cracked or damaged.

Secures your freestanding range to the floor to prevent tipping. Replace if bracket is missing, broken, or damaged during appliance installation.

Replacement control knob for range griddle burner. Installs on the control panel. Order if your original knob is cracked, broken, or missing.

Removable floor panel that covers the bottom of your range oven cavity. Replace if cracked, warped, or missing to protect internal components.

This small slimline oven control knob replaces a worn, cracked, or missing selector on compatible range and wall oven controls, restoring safe, accurate setting of heat and bake functions. Easy cosmetic repair for frequent-use dials. What it does

• Replaces the worn or broken knob used to turn oven functions or temperature settings.
• Restores a secure grip so settings can be selected without slipping or sticking.
• Helps resolve symptoms like a cracked or missing knob, difficulty turning the control, or a knob that spins freely.
• Matches the slim profile used on select Bosch/BSH ovens and ranges.

• One small slimline oven control knob.

• Safety first: disconnect power to the appliance before starting any repair.
• Remove the old knob by pulling straight off the control shaft; some designs may have a retaining screw—check before forcing.
• Align the replacement on the control shaft and press or tighten until fully seated; verify proper function before restoring power.

Protects your range's blower assembly and directs airflow for proper ventilation. Replace if cracked, damaged, or airflow is restricted. Verify fit.