Parts for Ge SPBD880J0MV: 01 - Pedestal Parts

Water hardness test strip tool for dishwashers. Tests mineral content in tap water to help determine optimal detergent and rinse aid settings.

Replace missing or stripped sheet metal screws on your washer pedestal. Secures panels, brackets, and components. Essential for rattling or loose parts.

This drawer pedestal is the lower storage drawer front that restores the cabinet look and secures the under-drawer area. It replaces worn, cracked, or broken pedestal trim to keep the appliance base appearing finished and functioning correctly. What it does:

• Replaces the lower storage drawer front/pedestal that covers and secures the appliance base
• Restores proper fit and appearance when the original pedestal is cracked, dented, or broken
• Helps keep the under-drawer area enclosed and prevents debris buildup beneath the appliance
• Matches original mounting points for a direct replacement

• Disconnect power and remove any contents from the drawer before beginning work
• Use basic hand tools; avoid over-tightening fasteners to prevent cracking the trim
• Handle painted or finished surfaces carefully to avoid scratches—use a soft cloth when positioning

Front panel for washer or dryer pedestal. Replaces cracked, scratched, or damaged panels. Restores the finished appearance of your pedestal drawer.

This is a replacement ST4-10 appliance screw used to fasten interior and exterior components. It provides a secure, corrosion-resistant hold to keep panels, brackets, and assemblies in place during normal appliance operation. What it does:

• Secures trim, panels, brackets, and small assemblies that use ST4-10 sheet-metal style screws
• Restores loose or missing fasteners that can cause rattling, misalignment, or part movement
• Small, high-thread engagement helps maintain a tight fit in threaded or self-tapping holes

• One ST4-10 screw

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Handle small parts carefully and keep track of fasteners during disassembly

This M3 x 10mm machine screw fastens small appliance panels and components, providing a secure, low-profile connection for internal brackets, trim pieces, and assemblies. Compact size for precision mounting in tight areas. What it does:

• Secures control panels, brackets, trim, and small internal parts
• Prevents rattling or loose components when properly installed
• Replaces worn or stripped fasteners that cause misalignment
• Used where a small M3 machine screw is required for reliable fastening

• Unplug appliance or switch off breaker before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten snugly but do not overtighten to prevent thread or part damage
• Keep loose screws away from heating elements and moving parts during reassembly

A standard M3 hex nut used to secure compatible M3 bolts and studs in appliance assemblies. Small but essential, it restores proper fastening where a worn, stripped, or missing nut causes loose panels or components. What it does:

• Secures M3 threaded fasteners to hold panels, brackets, or small components in place
• Replaces missing, stripped, or corroded nuts that allow vibration or movement
• Helps stop rattling, misalignment, or intermittent electrical/contact issues caused by loose parts
• Used wherever an M3 nut is specified by the appliance manufacturer

• Disconnect power and follow appliance safety instructions before accessing internal parts
• Use the correct M3 bolt and matching thread engagement; avoid cross-threading
• Tighten snugly but do not overtighten to prevent stripping threads or damaging parts
• Replace any accompanying damaged fasteners or hardware for a reliable repair

Fix a pedestal drawer that won't stay closed or latch properly with this replacement latch. Simple repair for loose or broken drawer latches.

Replacement mounting screw for washer pedestals. Secures panels and trim pieces to the pedestal base. Needed when original screws are lost or stripped.

This front top panel replaces the top front cover on select GE washers to restore appearance and protect internal controls. It provides a clean mounting surface and hides components for a finished look. What it does:

• Replaces a cracked, dented or faded top-front cover that exposes internal parts or looks worn
• Restores the washer's factory appearance and helps prevent debris from entering the control area
• Secures to the cabinet to provide a stable surface for control and trim pieces
• Fits the OEM mounting points to align with adjacent panels and controls

• Disconnect power to the appliance before beginning any repair
• Installation typically requires removal of the control console and a few screws; handle edges carefully to avoid scratches
• Use proper fasteners and align mounting tabs before tightening to avoid panel distortion

This front top cover panel replaces a damaged or worn trim piece to restore the appliance's appearance and protect internal components. It's a direct-fit exterior panel that maintains the factory look and provides a finished surface. What it does

• Covers and protects the top-front area of the control/door assembly from debris and damage
• Restores a clean, finished appearance when the original panel is cracked, bent, or scratched
• Helps keep internal components shielded from spills and contaminants
• Secures to the cabinet using the appliance's existing fasteners and alignment points

• One front top cover panel

• Disconnect power to the appliance before beginning any work
• Basic hand tools typically required (screwdrivers, nut driver); follow OEM disassembly sequence
• Handle edges carefully; panels and mounting tabs can be sharp or brittle on older units
• Inspect and reuse original fasteners and brackets unless replacement hardware is specified

Protective bumper pad for washer or dryer pedestals. Replace if pad is cracked, worn, missing, or no longer cushions appliance properly.

This 3 - Pump Assembly replaces the appliance's failed pump motor to restore water movement during cycles, helping the unit fill, circulate, or drain properly depending on application. Designed as a direct-fit replacement when the original pump is worn or faulty. What it does:

• Moves water through the appliance during selected cycles to enable proper cleaning or rinsing
• Can assist with draining or recirculation depending on appliance configuration
• Commonly replaces pumps that cause no-water-movement, weak flow, loud grinding or humming noises
• Helps stop intermittent operation or failure due to a seized or electrically failed pump motor

• One 3 - Pump Assembly

• Disconnect power and water supply before beginning any repair
• Handle wiring connectors and hose clamps carefully; verify orientation before removal
• Inspect hoses, seals and mounting gaskets for wear and replace if damaged
• Test the appliance after installation to confirm proper water flow and absence of leaks

Tank outlet elbow fitting for washer and dryer pedestals. Connects to the storage tank outlet for secure drainage. Replace if cracked, leaking, or broken.

Replacement mounting screw for washer pedestals. Secures pedestal to washer base. Order if original screw is stripped, missing, or damaged.

This genuine replacement screw secures panels and components on compatible appliances to restore proper fit and reduce vibration or rattling. Use when missing, stripped, or loose fasteners prevent parts from staying in place. What it does

• Fastens trim, panels, or mounting brackets to maintain component alignment
• Restores secure attachment when original screws are missing or damaged
• Helps eliminate noise and vibration caused by loose parts
• Matches the OEM thread profile and length for proper fit

• Use the correct screwdriver or bit to avoid cam-out and damaged heads
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep spare screws and small parts away from children and pets
• If threads are damaged, replace mating fastener or insert rather than forcing this screw