Parts for Craftsman 944511610: Pole Pruner Attachment Parts

The attachment hanger holds the line trimmer attachment when it is not being used. The part is made of durable plastic, but it can experience wear and tear or damage due to impact. If the attachment hanger is broken, it will need to be replaced so the line trimmer has a place to hang.Taking a quick look at the attachment hanger will give insight into whether it's cracked, broken, or otherwise damaged. This is an easy component to replace since it snaps off of the lawn equipment. All that one needs to do is take the old one off and install a new one. Once it has been installed, the new attachment hanger can be used to hold accessories when the machine is running.This attachment hanger is a genuine replacement part sourced directly from the manufacturer. It is sold as an individual component. The hanger is designed to be used with string trimmers, pole pruners, and chainsaws manufactured by Craftsman, Weed Eater, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

This is a replacement sprocket for use in various types of handheld lawn and garden tools. It is sourced directly from the manufacturer and is identical to the sprockets found in the original equipment. Sprockets can be used for a range of applications. They are often used as a means to drive the chain around the chain bar on a chainsaw or pruner, for example. The metal sprocket could need to be replaced at some point. Over time, it could start to wear down, or there is a chance that it could bend slightly or corrode. This would reduce its effectiveness, and it could even present a danger to the user. Owners should inspect the sprocket when they are doing routine maintenance and replace it if needed. Replacement of the part is typically simple to do. The sprocket is a genuine OEM part that is sold individually. It is used for chainsaws and pole pruners, and it can be found in some trimmer attachments. It is compatible with certain models from Husqvarna, Poulan, and Poulan Pro.

This replacement part is a screw. This part is a genuine replacement part made by Husqvarna. Screws are small but important in many different types of machinery. Screws are able to hold different parts in place and help them stay secure during use so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is missing or damaged in any way. It is possible that the screw can become stripped over time and therefore not stay in place properly. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. Note that This is a genuine OEM replacement part.

The saw guide bar is what provides stability, efficiency, and guidance to the chain that cuts and the motor that drives the chain. This 8-inch replacement bar for pole pruners features solid and durable steel construction. It will make sure equipment cuts quickly and smoothly while delivering maximum efficiency. A worn guide bar would result in inaccurate and inefficient cutting and logging. A bar may worn-out if cutting takes longer than with a sharp chain. A replacement may also be needed when the bar shows narrow tails, when the inside rails are worn, and when the groove turns to a loose V shape. To extend the life of the bar, ensure that the chain stays oiled while in use and that the bar is flipped upside down each time the chain is sharpened. This genuine OEM replacement bar is meant for use on a pole pruner or pole saw produced by Poulan or Poulan Pro. It is sold individually.

This replacement part is a hex nut. This is a genuine replacement part made by Husqvarna. Hex nuts are small but important to the overall workings of different types of machinery. These parts work with other small pieces like screws and washers to ensure that all parts of the machine are in place and secure.A new hex nut might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of extended use or a single incident. It is not uncommon that hex nuts experience large amounts of friction over time and can become worn down after a while. Refer to the owner's manual for specific directions on how to replace this part.This hex nut is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part in string trimmers, edgers, chainsaws, and pole pruners.The screw in a small engine outdoor appliance might eventually have to be replaced in the case that the screw is lost, misplaced, or damaged from general wear and tear with long-term use. If the screw is lost or misplaced and its absence is noted by the operator, the screw should be replaced by this genuine OEM replacement part as soon as possible. If the screw is dented, cracked, punctured, or otherwise damaged, it should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This genuine Husqvarna replacement part is an oiler for use with pruners and chainsaws. It is also known as an oil assembly or oil pump. Proper lubrication is essential for the safe and reliable use of a pruner or chainsaw. The oiler is used to provide oil to lubricate the sprocket and chain of the equipment.The sprocket or chain may become worn out or damaged if not properly lubricated, requiring a replacement. Proper oiling of these parts can extend the life of the pruner or chainsaw. Remember to check the sprocket and chain periodically to see if they are properly lubricated. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with a variety of Husqvarna, Craftsman, Weed Eater, and Poulan pruners and chainsaws.

This replacement oil tank for a pole pruner or chainsaw is an authentic OEM replacement part. The inner workings of an engine consist of many moving parts. These parts are mostly made of metal and they thrash about against each other to produce and transfer energy. Engines use oil to lubricate these parts so that they do not rub and create friction as this would cause the engine to overheat. This oil tank lets operators quickly top up their engines with oil without having to take apart the inner mechanics. Oil tanks are made of durable reinforced plastic but it is still possible to bang, dent, or even puncture them. Should this happen, oil will leak from the tank and the engine will be starved of lubrication. For safety purposes, it is important to immediately replace a broken oil tank. To do so, use a wrench to remove the old tank and install the new part with the same bolts. This oil tank is compatible with Poulan and some Husqvarna appliances, and as a high-quality replacement part, it comes sourced from its original manufacturer. This part includes an oil tank and oil tank cap but it does not include an oil line.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.