Power Pro Tiller Parts

This part is a replacement gear case gasket. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective gear case gasket in a variety of tiller models.The gear case gasket is what properly seals the space in between the two parts of the gear case. Gaskets are subject to significant wear and tear and thus may need to be replaced when worn or no longer effective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this gear case gasket, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this gear case gasket is suitable for use on several different models of tiller models manufactured by MTD, Craftsman, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This is the front wheel assembly that is used by a large number of manufactures as the standard wheel for push mowers. This wheel is a tough, black rubber wheel fitted onto a sturdy white chassis. Since it is not a pneumatic wheel, there is no concern that it will roll over hidden debris and be damaged. Push wheels such as these often last the lifetime of a Lawn Mower. However, there are occasions when the housing of the mower is dropped and the wheel becomes warped or broken. It's also the case that, with constant use, the wheels can lose tread, making them harder to maneuver in tough mowing conditions. It has also been reported that the tires will wear and become smaller in circumference over time, meaning it will require more gasoline to mow the same amount of yard. The front wheels are easily replaced. After removing the plug cap and stabilizing the mower, simply use a socket wrench to remove the center bolt from the wheel. It's a good idea to use a dry lubricant like graphite on the axle before replacing it. This OEM guaranteed replacement part is compatible with Ryobi, Yard Machines, Troy-Bilt, Cub Cadet, Husky, Yard-Man, and MTD push mowers.

This genuine replacement part is a MTD flat washer flange sized .339 X .640 inch X .033 inch. This MTD flat metal washer flange has a variety of applications for many types of equipment including lawn mowers, snow blowers, tillers, edgers, and log splitters. Washers are important to the proper functioning of the product. They spread the load of a threaded fastener, such as a bolt or nut, or can be used as a spacer. However, they can often wear down or become damaged through extended normal use and may not last the full life cycle of the product, leading to improper operation. This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This MTD flat washer flange has multiple applications in a wide range of products from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery, Wards, Bolens, Yard-Man, Turf King, MasterCut, and more. Please note: original part number 166763 is now obsolete, and manufacturer has replaced the original part number with this part.

This shoulder screw is a genuine MTD part, sold individually. This shoulder screw can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, tillers, and edgers. The purpose of a shoulder screw is to pierce through one or more components with the intention of securing them in place either to another component or to one another.The shoulder screw of an outdoor appliance might have to be replaced if it is lost, misplaced, or damaged to the point that it cannot hold components together. The shoulder screw can be easily lost or misplaced as it is a small component; additionally, the shoulder screw can become stripped with long-term use, in which case it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This shoulder screw is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, Troy-Bilt, Craftsman, Huskee, and Bolens.

This ball detent is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a ball detent is to temporarily keep two parts in place relative to one another, as one or both of the parts rotate.A ball detent might have to be replaced in the event that it suffers damage over time or is lost or misplaced. It is possible for ball detents to fall out of their spot, meaning that the parts that it ordinarily holds in place will not be able to rotate properly. Additionally, a ball detent might have to be replaced if there is material deterioration. If this occurs, a replacement ball detent part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ball detent is compatible with the following brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

This replacement part is a pulley, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This pulley is specifically found in lawn mowers and is an essential part of the mechanisms inside the device. A pulley allows two things to be looped together and is responsible for the type of force that is used inside the engine. A new pulley might be needed if the current one is damaged or broken. Be sure the actual pulley is the faulty part rather than the belt or other parts around it. Because the pulley deals with so much friction overtime, it is commonly replaced due to being stripped down. Be sure the engine is cooled off as the pulley and surrounding parts are usually hot because of friction.This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This is a genuine OEM engine pulley sourced directly from the manufacturer for use on tiller engines and other engines with a pull start. The starter cord is attached to a pulley that has a spring for rewinding the cord after the engine starts. If the engine pulley is damaged due to rust or corrosion and the string won't pull, the engine won't start. The pulley may make screeching or whining sounds when pulled, this is one way to recognize that the pulley is beginning to go bad and should be replaced soon.Before replacing the pulley, make sure the engine is cool and remove the spark plug. Remove the starter housing to access the rope starter and pulley. Disassemble the pulley system and discard the old pulley. Reinstall the new pulley and thread the starter cord back around it. Reassemble the housing and put the spark plugs back so that you can test the starter. This engine pulley is made of heavy-duty steel and sold as an individual unit. It is designed to be compatible with small engines manufactured by Craftsman.

This engine pulley outer half is a genuine MTD part, sold individually. This engine pulley outer half can be used as a replacement part for a tiller. The purpose of an engine pulley outer half is to function in conjunction with the engine pulley inner half to form the pulley for a tiller, which affixes to the crankshaft and facilitates the driving of the belt.The engine pulley outer half might have to be replaced at some point in the lifespan of a tiller if the component is not functioning as it usually does. This could occur if the component suffers damage in the form of puncturing, cracking, breaking, or eroding. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This engine pulley outer half is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.