Parts for Columbia 12A-976B897 / 2010: Pulley Assembly Parts

This pulley assembly is a genuine MTD part, sold individually. This pulley assembly can be used as a replacement part in a lawn mower. The purpose of a pulley assembly in a lawn mower is to facilitate the rotation of the drive belt such that the wheels of the lawn mower can be rotated to propel the appliance forward across a variety of surfaces while in use.The pulley assembly in a lawn mower might need to be replaced at some point within the typical lifespan of the appliance if the pulley assembly or the general components around it suffer damage that renders it incapable of performing its usual function. If the pulley is significantly damaged to that point, the pulley assembly should be removed and replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This pulley assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, and Cub Cadet.

Metal carriage bolt with round head and threaded shank for lawn mowers and snow blowers. Replaces broken or missing hardware during repairs or assembly.

This durable metal screw is designed to be used on many types of lawn and garden equipment, such as lawnmowers and snowblowers. The screw can be used to attach different components together so they stay stable and connected to ensure the equipment works correctly. It can be used on a variety of materials including metal, plastic, bricks, and wood. If the screw needs to be replaced, a visual inspection will indicate that. Screws often become damaged over time or can even break. Some screws also become stripped and no longer do what they are intended for. A hex wrench can be used to remove this screw from the machine so the new one can be installed. After installing the replacement screw, it should be tightened to ensure the materials it brings together are kept flush.This screw is made for use with lawnmowers, snowblowers, chipper shredders, and lawn tractors manufactured by MTD, Yard Machines, Yard-Man, and Troy-Bilt. It is sold as an individual part. This is an authentic OEM replacement part that is sourced directly from the manufacturer. A hex wrench may be needed for the replacement.

Hex nut fastener for lawn mowers, tractors, and outdoor power equipment. Replaces missing, stripped, or damaged nuts. Standard 1/4-28 threading.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

This replacement part is a washer. It is a genuine replacement part made by MTD. Washers are small but important components, allowing spacing in between certain parts near and around the engine. Washers are typically used alongside screws and nuts to provide a tight and secure fit of many different parts in the appliance.A new washer might be needed if the current one is damaged or missing. Washers need to be replaced as they become stripped. This is usually due to friction inside the machine. Be sure the engine is turned off before replacing this part. Typically washers are easy to replace and might only need a screwdriver during the repair. This washer is a genuine OEM replacement part. Note that it is sold individually. Be sure to purchase the correct amount as some machines require more than one.

This is a speed control cable that connects the handle-mounted speed lever to the drive mechanism on a self-propelled lawn mower. It transmits operator input to engage or adjust the ground speed of the mower. Replace this cable if the self-propel function is unresponsive, the mower won't change speeds, or the cable is visibly frayed, stretched, or broken.

Spacer sleeve for lawn mower assembly. Replaces worn, damaged, or missing sleeves. Maintains proper spacing between components during operation.

The roller cable guide is designed for use with lawnmowers. It supports and guides cables to the lasher in the mower.This roller cable guide is a genuine OEM part sourced directly from the manufacturer and is sold individually. This roller cable guide is compatible with the following brands: Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, and Yard-Man.

Can't shift speeds smoothly on your mower? This 6-speed control arm restores precise gear selection. Compatible with walk-behind and self-propelled models.

Pivot bracket for lawn mowers. Mounts to the mower deck or frame to support moving components. Replace if cracked, bent, or broken to restore stability.