Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Dishwasher Circulation Pump Motor by Bosch

Best Seller
Manufacturer Part
4.89 (64)
By: Bosch
Part Number: OEM8407134
Manufacturer Part Number: 00263835

Dishwasher not spraying water or dishes staying dirty? The circulation pump motor distributes water to spray arms. Moderate DIY repair, about 3 hours.

More
$328.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Questions & Answers

For Bosch Dishwasher Circulation Pump Motor (Part Number: OEM8407134)

1 Answer

Dean,

This issue will most likely be caused by a circulation pump since there appears to be power getting to it.

Read More...

1 Answer

Icanfixthat,
Check to see which part is leaking, (circulation pump, drain pump...etc) repair, or replace as needed.

Read More...
Ken for Model Number SHX57CUC

Bosch dishwasher just replaced the water inlet valve since we had no water entering the DW. Now there is some water but it's not going up through the arms and washing. Water enters in and the washer runs through all the cycles without washing till the end. Water does pump out to drain. Still waiting for the new 800 series to be manufactured for almost a full year but not sure when that will be made. I'd like to get this one going again. I like the fact your company has all the parts and had no problem with installing the water inlet valve.

1 Answer

Ken, You will want to locate the tech sheet for your dishwasher and run a diagnostics mode to help narrow down the root cause of the issue.

Read More...

1 Answer

Jeff,

It would be recommended to check down inside of the unit to ensure that there is no issue with something clogged in the pump causing the noise but if there is not then this will be a faulty circulation motor.

Read More...

1 Answer

Jpeter N,

You will want to access the pump and check the impeller to make sure that there is nothing caught in it and also make sure that the microfilter is clean.

Read More...

1 Answer

Hello Jessica,
This will either be a low water fill or a lack of water circulation. Let the unit fill and check the water level. It should be within 3/4 of an inch from the heating element. If not, the water valve is the issue. If it fills properly, the issue will either be a clogged filter inside the unit or the circulation pump has an issue. On Bosch models, the water inlet valve and debris in the sump area is the most common failures.

Read More...

1 Answer

David, Can you hear the wash motor running ? or is there no noise at all, it could be a faulty circuit in the control board, or an issue in the circulation motor itself. We're sending you more information that should help pinpoint the problem, and get you up and running. Thanks

Read More...

1 Answer

There is more than one part that can cause this problem. We have a Repair Forum on our website and it would be better for you to ask this question in that venue. You may be able to find an answer by searching in the dishwasher section or you can post your own questions. Be sure to provide your model and serial numbers. Here is the link http://forum.appliancepartspros.com/ Thanks!

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google